من فكر كنم تنظيمات int dialler 1 كافيه و براي int fast 0/1 هم از دستورات زير استفاده كن
interface FastEthernet0/1
no ip address
ip nat outside
no ip mroute-cache
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxx password 0 xxxxx
يوزر و پسورد خط adsl را اينجا ثبت كن
!
ip route 0.0.0.0 0.0.0.0 Dialer1
فكر كنم تنظيمات را براي روتر با پورت ATM گفته باشه مثل روتر 878