نمایش نتایج: از شماره 1 تا 5 از مجموع 5

موضوع: با اينكه E1 فعال (UP ) است ولي بوق اشغالي داريم

  
  1. #1
    نام حقيقي: HAMID ATAEI

    عضو غیر فعال شناسه تصویری ataei
    تاریخ عضویت
    May 2005
    محل سکونت
    Golestan
    نوشته
    295
    سپاسگزاری شده
    12
    سپاسگزاری کرده
    4

    با اينكه E1 فعال (UP ) است ولي بوق اشغالي داريم

    سلام

    خط E1فعال است يعني up است ولي بوق اشغالي داريم
    نوع مودم پتون
    روي خط آلارم وجود ندارد

    کد:
    micromet>sh controllers e1 0
    E1 0 is up.
      Applique type is Channelized E1 - unbalanced
      No alarms detected.
      alarm-trigger is not set
      Version info of slot 0:  HW: 1, PLD Rev: 11
      Framer Version: 0x8
    Manufacture Cookie Info:
     EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x49,
     Board Hardware Version 3.1, Item Number 800-3883-02,
     Board Revision B0, Serial Number 20232259,
     PLD/ISP Version 0.1,  Manufacture Date 3-May-2000.
      Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line Primary.
      Data in current interval (242 seconds elapsed):
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 1:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 2:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 3:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 4:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 5:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 6:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 7:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 8:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 9:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 10:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 11:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 12:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 13:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 14:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 15:
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Data in Interval 16:
         1 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins
         1 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Total Data (last 16 15 minute intervals):
         1 Line Code Violations, 0 Path Code Violations,
         0 Slip Secs, 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins,
         1 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
    با توجه به اينكه اين خط قبلا بدون مشكل كار مي كرد
    مشكل از چيست ؟ لطفا راهنمايي كنيد



    موضوعات مشابه:





  2. #2
    نام حقيقي: Iman Mansouri

    عضو غیر فعال شناسه تصویری shabake_karan
    تاریخ عضویت
    Apr 2006
    محل سکونت
    Tehran
    نوشته
    1,050
    سپاسگزاری شده
    369
    سپاسگزاری کرده
    12
    شما خروجی این فرمان دستور رو بگذار : show isdn status



  3. #3
    نام حقيقي: HAMID ATAEI

    عضو غیر فعال شناسه تصویری ataei
    تاریخ عضویت
    May 2005
    محل سکونت
    Golestan
    نوشته
    295
    سپاسگزاری شده
    12
    سپاسگزاری کرده
    4
    کد:
    micromet>sh isdn status
    Global ISDN Switchtype = primary-net5
    ISDN Serial0:15 interface
            dsl 0, interface ISDN Switchtype = primary-net5
        Layer 1 Status:
            ACTIVE
        Layer 2 Status:
            TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        Layer 3 Status:
            1 Active Layer 3 Call(s)
            CCB:callid=A, sapi=0, ces=0, B-chan=10, calltype=VOICE
        Active dsl 0 CCBs = 1
        The Free Channel Mask:  0xFFFF7DFF
        Number of L2 Discards = 0, L2 Session ID = 1
        Total Allocated ISDN CCBs = 1




  4. #4
    نام حقيقي: Cisco

    عضو عادی شناسه تصویری ccna
    تاریخ عضویت
    Sep 2004
    محل سکونت
    Cisco
    نوشته
    260
    سپاسگزاری شده
    85
    سپاسگزاری کرده
    12
    config bezar bbenam



  5. #5
    نام حقيقي: شاهین غرقی

    خواننده شناسه تصویری webgard3
    تاریخ عضویت
    Feb 2006
    محل سکونت
    iran/shiraz
    نوشته
    3,401
    سپاسگزاری شده
    1040
    سپاسگزاری کرده
    147
    مخابراتی مشکل نداری؟ از سوئیچینگ؟



کلمات کلیدی در جستجوها:

اشغالی بوق e1

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •