راهنمایی بعضی از مک آدرس ها خارج از هات اسپات

[hussein1363]

سلام
می خواستم ببینم چطور بعضی از مک آدرس ها رو میتونم بیرون هات اسپات تعریف کنم به طوری که همیشه اینترنت داشته باشن و نیازی به ورود پسورد نداشته باشن

---

موضوعات مشابه:

• لاگین هات اسپات
• ارتباط هات اسپات و شبکه داخلی
• مشکل با هات اسپات و قطع شدن کل شبکه
• مشکل کانفیگ icp در کش اکسپرس
• راهنمایی در مورد قسمت bandwidth کش اکسپرس

---

[th95]

بايد از Hotspot Binding استفاده كنيد
و البته گزينه Bypassed
كه ميتونه بر اساس MAC يا IP Address باشه

توضيحات زير كاملا واضح است

Manual:IP/Hotspot - MikroTik Wiki

IP Bindings

Sub-menu: /ip hotspot ip-binding



IP-Binding HotSpot menu allows to setup static One-to-One NAT translations, allows to bypass specific HotSpot clients without any authentication, and also allows to block specific hosts and subnets from HotSpot network


Property Description address (IP Range; Default: "") The original IP address of the client mac-address (MAC; Default: "") MAC address of the client server (string | all; Default: "all") Name of the HotSpot server.

• all - will be applied to all hotspot servers

to-address (IP; Default: "") New IP address of the client, translation occurs on the router (client does not know anything about the translation) type (blocked | bypassed | regular; Default: "") Type of the IP-binding action

• regular - performs One-to-One NAT according to the rule, translates address to to-address
• bypassed - performs the translation, but excludes client from login to the HotSpot
• blocked - translation is not performed and packets from host are dropped

[hussein1363]

بايد از Hotspot Binding استفاده كنيد

و البته گزينه Bypassed


كه ميتونه بر اساس MAC يا IP Address باشه

توضيحات زير كاملا واضح است

IP Bindings

Sub-menu: /ip hotspot ip-binding

IP-Binding HotSpot menu allows to setup static One-to-One NAT translations, allows to bypass specific HotSpot clients without any authentication, and also allows to block specific hosts and subnets from HotSpot network

Property Description address (IP Range; Default: "") The original IP address of the client mac-address (MAC; Default: "") MAC address of the client server (string | all; Default: "all") Name of the HotSpot server.

• all - will be applied to all hotspot servers

to-address (IP; Default: "") New IP address of the client, translation occurs on the router (client does not know anything about the translation) type (blocked | bypassed | regular; Default: "") Type of the IP-binding action

• regular - performs One-to-One NAT according to the rule, translates address to to-address
• bypassed - performs the translation, but excludes client from login to the HotSpot
• blocked - translation is not performed and packets from host are dropped

ممنون از راهنماییت کار کرد