چگونگی تغییر REMOTE PORT در SERVER

[tips4share]

سلام . کسی میدونه چگونگی تغییر REMOTE PORT در SERVER 2003 رو؟ و در صورت تغییر SYNTAX جدید واسه ROMOTE شدن چه جوری میشه؟ بازم با REMOTE DESKTOP CONNECTION میشه وصل شد؟ ممنون

---

موضوعات مشابه:

• سوال remote host port triggering
• تغییر پورت پیش فرض Termial Service - Remote Desktop
• تغییر port در elastix
• تغییر Port برای SMTP Server

---

[patris1]

اینطوری

Warning: The incorrect use of the registration editor can cause serious problems which concern the whole system and require a new installation of the operating system. Microsoft cannot guarantee that the problems which are due to a wrong use of the registration editor can be repaired. Use the registration editor on own responsibility.

1. Launch the registration editor.
2. Click on the following unterkey in the registration:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\TerminalServer\WinStations\RDP-Tcp\PortNumber
3. Click in the menu Edit on changing, and click afterwards on Decimally.
4. Enter the new port number, and click on OK.
5. Quit the registration editor.

و برای WinXP

Go forward as follows to change the number of the port to which the Remotedesktop produces a connection:

1. Click on start, point at programmes, point at accessories, point at communication, and click afterwards on Remotedesktopverbindung.
2. Give in the field Computer the computer name or the IP address of the computer to which you would like to produce a connection followed by a colon ( : ) and the number of the port which you would like to use.

Enter, for example, following to produce a connection to port in 3390 on a computer called "MeinXPPro":
MeinXPPro:3390
Enter following to produce a connection with port in 3391 on a computer with the IP address 10.10.10.1:
10/10/10/1:3391
3. Click on connecting.

[tips4share]

THANK U SO MUCH DEAR FRIEND