نمایش نتایج: از شماره 1 تا 1 از مجموع 1

موضوع: config tenor a800

  
  1. #1
    نام حقيقي: khashayar roozegar

    عضو غیر فعال شناسه تصویری khashayar5
    تاریخ عضویت
    Sep 2004
    محل سکونت
    Tehran-Kish-Duabi
    نوشته
    98
    سپاسگزاری شده
    5
    سپاسگزاری کرده
    1

    Icon12 config tenor a800

    voip util سلام من یک مشکلی توی کانقیگ تنور دارم و وصل شدنش به

    اگر کسی میتونه کمکی بکنه ممنون میشم البته هزینه اش هم پرداخت میشه

    کانفیگ تنور به شرح .... هست البته یکی از دوستان فروم به من پی ام داد ولی من ایدیشو گم کردم


    اگر امکان داره دوباره به من پی ام بده


    info@kish-net.net

    khashayar5@yahoo.com



    Unit
    ----
    Unit: 1
    IP Address = 217.219.47.40
    External IP Address = 0.0.0.0
    Name = kishnet

    Online = 1
    Relay ResetTime = 240
    Relay Reset Number = 2

    TcpKeepAlive = Disabled(0)




    System
    ------
    Country Value = 8
    Country Code = 98
    Area Code = 764
    Minimum DN = 7
    Maximum DN = 25
    International Prefix:
    Long Distance Prefix =
    Carrier Selection Prefix:
    Intercom Used = no(0)
    Private DN Used = no(0)
    Interdigit Timeout = 4 sec.
    Contact =
    Location =
    IP Address : of Snmp Trap Server 1 = 0.0.0.0
    IP Address : of Snmp Trap Server 2 = 0.0.0.0
    IP Address : of Snmp Trap Server 3 = 0.0.0.0
    IP Address : Port # of Syslog Server 1 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 2 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 3 = 0.0.0.0 : 514
    Syslog Facility = 16
    IP Address : Port # of Cdr Server 1 = 0.0.0.0 : 0
    IP Address : Port # of Cdr Server 2 = 0.0.0.0 : 0
    Cdr Password:
    Cdr Format: 0
    Ring Frequency = 20 Hz(0)
    PSTN Ring Sensitivity = Low(1)
    Primary Time Server: IP Address = 0.0.0.0
    Secondary Time Server: IP Address = 0.0.0.0
    UTC Offset: Unknown
    Disc Tone Frequency: 250 Hz (min) : 650 Hz (max)
    Disconnect On/Off Time: 250 mSec(on) : 650 mSec(off)
    Call Indication Tone = None(0)
    Disable GUI = no(0)
    Dialplan
    --------
    User Programmable DP = No
    Dialplan table:
    index:Pattern DpType min max nprefix
    System LAN
    ----------
    Subnet Mask = 255.255.255.0
    Default Gateway = 217.219.47.33
    PSTN Trunk Group
    ----------------
    PSTN Trunk Group: 1
    Name = PstnPassThrough1
    Pass Through = no(0)
    PT Trunk ID = 0
    Provide Call Progress Tone = yes(1)
    Busyout = no(0)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = Prepaid calling card
    Ivr Card Digit Length = 10
    Disabled Voice Prompt 0
    Ivr Preauthentication = 0
    Ivr Language = 1
    MultiSession code: = None
    IVR Access Number = None
    Ivr Answer Delay = 30
    Retry Counter = 1
    CID = From Interface(0)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = yes(1)
    IP Extension = no(0)
    Maximum LAM Calls Allowed = 8
    LAM: Index Pattern Replacement NumberType
    Cas Signaling Type = loop start(1)
    Cas Orientation = user(0)
    Dial Tone Detect = yes(1)
    Dial Delay Timeout = 1000
    Answer Delay Timeout = 60
    Flash-Hook Signaling = no(0)
    Supervision = answer and disconnect(3)
    Caller Id Detection = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 2: 1,2,3,4,5,6,7,8
    PBX Trunk Group
    ---------------
    PBX Trunk Group: 1
    Name = PbxPassThrough1
    Pass Through = yes(1)
    PT Trunk ID = 0
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = Trunk ID(1)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = yes(1)
    IP Extension = no(0)
    Public Number of Digits = 7
    Private Number of Digits = 4
    Public Hunt Ldn's:
    Private Hunt Ldn's:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 1,2,3,4,5,6,7,8
    IP Trunk Group
    ---------------
    Incoming IP call delete digits = 0
    Incoming IP call prefix =
    Outgoing IP call delete digits = 0
    Outgoing IP call prefix = 2587
    Prefix Trunk ID = no(0)
    Default Trunk = No
    External Routing Request = no(0)
    Display Information ID = Tenor-Gateway
    Line
    ----
    Line: 1
    Law = uLaw(0)
    Rx Gain = -4dB
    Tx Gain = -2dB
    Line: 2
    Law = uLaw(0)
    Rx Gain = 0dB
    Tx Gain = 0dB
    Guard Time = 0mS
    DAA Start Up = Enabled
    Bandwidth Management
    --------------------
    Time of Day Maximum Bandwidth:
    Day = 0(Sunday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 1(Monday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 2(Tuesday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 3(Wednesday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 4(Thursday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 5(Friday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 6(Saturday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Gatekeeper Administration
    -------------------------
    Endpoint Authorization Type = 0 (None)
    Allowed Endpoints
    IP Mask
    No Allowed Endpoints Configured
    Barred Endpoints
    IP Mask
    No Barred Endpoints Configured

    Gatekeeper System
    -----------------
    Zone Name =
    Border Element IP Address(prim) = 217.219.47.40
    Border Element IP Address(sec) = 0.0.0.0
    Discovery IP Address = 0.0.0.0
    Gatekeeper Password =
    LRQ returns all candidates(0)
    Maximum LRQ Hops = 0
    WAN Call Limit = 0 (disabled)
    LCF/LRJ V3plus = 1
    Gatekeeper Option Flags:
    Use IP Header Address = no(0)
    Ridgeway ARQ = no(0)
    Border Element
    -----------------
    Static Routing
    Static Route #1
    RouteName =
    Gkmode = Destination is a Gateway (0)
    CallSignalAddress = 67.19.249.186:1720
    1:* Public LDN priority(1)
    2:* Private LDN priority(2)
    DSP
    ---
    Voice Coding algorithm = 68
    Voice Information Field size = 640 bits
    Silence Suppression = Enable(1)
    Minimum Jitter buffer = 60 msec
    Maximum Jitter buffer = 300 msec
    Receive Gain (PCM -> IP) = -2 dB
    Transmit Gain (IP -> PCM) = -4 dB
    Digit Relay = 0
    Fax Relay Type = 0
    Fax Maximum Rate = 144
    Fax Playout FIFO nominal delay = 600
    Fax Modem Coding = 0
    Fax Modem Voice Information Field size = 0 bits
    Packet Saver = Disabled
    Idle Time = 0
    Answer Supervision Options = 0
    Disconnect Supervision Option = 0
    AutoSwitch
    ----------
    Auto Threshold = 50
    H323 Gateway
    -----------------
    Primary GK Address = 0.0.0.0
    Primary Auto Discovery = 1
    Secondary GK Address = 0.0.0.0
    Secondary Auto Discovery = 0
    H.323 ID =
    Register DN = Register as GW Prefixes(1)
    Ignore Bandwidth in ACF = no(0)
    Default H245 Tunneling = yes(1)
    Round Trip Delay = 0
    One Stage Dialing = 0
    RRQ Interval = 0
    H323 Interop Flags:
    H225 GW Protocol = h323(0)
    Do BRQ = 0
    SlaveSessionId0 = 0
    AllowFastStartOnly = No(0)
    RRQv3plus= No(0)
    ProgressInd Alert= No(0)
    StartH245Flag= No(0)
    Automatic Ext IP Update= No(0)
    RTP Verification= No(0)
    Do Lightweight RRQ = no(0)
    Radius User
    -----------
    host p 217.219.47.42
    authenticationport p 2222
    accountingport p 2223
    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813
    retry = 3
    timeout = 5
    accountingtype = 0
    billingvendor 0
    sharedsecret **********
    IVR
    ------
    Primary File Server: IP Address = 217.219.47.42
    Secondary File Server: IP Address = 0.0.0.0
    timeout: 5
    Enabled Languages: 1

    CID Translation Table
    ------
    Caller ID Translation Table
    Index Pattern Replacement
    Radius Endpoint
    ---------------
    host p 0.0.0.0
    authenticationport p 1812
    accountingport p 1813
    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813
    retry = 3
    timeout = 5
    idtype = 0
    passwordtype = 0
    sharedsecret
    Product Name: Tenor Analog A800 Multipath Switch - 8 ports (Rev. B)
    Gatekeeper Status: Mini
    GK Calls Allowed: 8
    Feature Bit Status: +PS/+RB/+ER
    Languages allowed: 1
    Serial Number: A002-001C8B
    Ethernet Address: 00-30-E1-00-1C-8B
    IP Address: 217.219.47.40
    Subnet Mask: 255.255.255.0
    Default Gateway: 217.219.47.33
    System Software Version: P4-2-20-31(LEC) (1712369/0xE679)
    Boot Software Version: P4-1-3 (180592/0xE814)
    Database Version: 2.08 09-13-2000 (277900)
    config#





    موضوعات مشابه:

      ویرایش توسط khashayar5 : 2005-06-17 در ساعت 02:48 AM

    کلمات کلیدی در جستجوها:

    تنور

    تنور a800

    tenor

    tenor a800

    کانفیگ تنور کوینتوم

    register id number yahoo

    time server ip

    اموزش کانقیگ gateway voip

    config tenor

    tenor as fx800

    tenor a800 fax

    how confige tenor fx800

    how to config tenor

    tenor site:http:forum.persiannetworks.com

    tenor a800 Syslog Server

    روش کانفینگ کردن تنور کینتوم

    khashayar5

    config snmp on tenor

    forum.persiannetworks.com t9310

    دستورات tenor کانفیگ تنور

    پورت tenor up و down میشه

    config tenor gateway A800

    tenor sys log facility

    config for tenor

    prefix in tenor

    برچسب برای این موضوع

    مجوز های ارسال و ویرایش

    • شما نمی توانید موضوع جدید ارسال کنید
    • شما نمی توانید به پست ها پاسخ دهید
    • شما نمی توانید فایل پیوست ضمیمه کنید
    • شما نمی توانید پست های خود را ویرایش کنید
    •