IBS Authentication Error

[reza.sa.ir]

سلام دوستان

من مدتی است که می خوام IBSngروروی Fedora core 4برای کاربران LANازطریق VPNراه بندازم

من Poptopرو نصب کردم وبرای ارتباطباIBSngتنظیم نمودم.درضمن فایلهای options.pptpdوpptp.confرااز رویIBSngدرشاخه های مربوطه کپی کردم.درIBSngدوتاRASازنوع pppdوLAN Persistantتعریف کرده ام

موقعی که از روی VPN Clientسعی می کنم به VPN Serverوصل بشم خطای username وpassword روی domainمی ده وجالب تراینکه باوجود قطع اتصال این کاربربه کاربران Onlineروی IBSngاضافه می شه .در ضمن من هردونوع RASراامتحان کرده ام .من قسمتی ازlog fileهای سیستم راقرارمی دم که دوستان بتونن بهتر بررسی کنن

Message file :

Nov 24 18:28:27 localhost pptpd[3236]: CTRL: Client 192.168.1.7 control connection started

Nov 24 18:28:27 localhost pptpd[3236]: CTRL: Starting call (launching pppd, opening GRE)

Nov 24 18:28:27 localhost pppd[3237]: Plugin radius.so loaded.

Nov 24 18:28:27 localhost pppd[3237]: RADIUS plugin initialized.

Nov 24 18:28:27 localhost pptpd[3236]: GRE: Bad checksum from pppd.

Nov 24 18:28:27 localhost pptpd[3236]: GRE: Bad checksum from pppd.

Nov 24 18:28:27 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California

Nov 24 18:28:27 localhost kernel: PPP generic driver version 2.4.2

Nov 24 18:28:27 localhost pppd[3237]: pppd 2.4.3 started by root, uid 0

Nov 24 18:28:27 localhost pppd[3237]: Using interface ppp0

Nov 24 18:28:27 localhost pppd[3237]: Connect: ppp0 <--> /dev/pts/2

Nov 24 18:28:29 localhost pptpd[3236]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!

Nov 24 18:28:29 localhost pppd[3237]: rc_avpair_new: unknown attribute 11

Nov 24 18:28:29 localhost pppd[3237]: rc_avpair_new: unknown attribute 25

Nov 24 18:28:30 localhost pppd[3237]: rc_avpair_gen: received unknown attribute 85 of length 4: 0x0000003C

Nov 24 18:28:30 localhost pppd[3237]:

Nov 24 18:28:30 localhost pppd[3237]: Peer lantest failed CHAP authentication

Nov 24 18:28:30 localhost pppd[3237]: Connection terminated.

Nov 24 18:28:30 localhost pppd[3237]: Exit.

Nov 24 18:28:30 localhost pptpd[3236]: CTRL: Client 192.168.1.7 control connection finished

------------------------------------------------------------------------------------------

Ibs_radius.log :

2005/11/24-18:28:29 ##############

2005/11/24-18:28:29 Authenticate attributes from 127.0.0.1

2005/11/24-18:28:29 User-Name: ['lantest']

NAS-IP-Address: ['127.0.0.1']

NAS-Port: [0L]

Service-Type: ['Framed-User']

Framed-Protocol: ['PPP']

Calling-Station-Id: ['192.168.1.7']

Ibs_queries.log

2005/11/24-18:28:02 BEGIN;

2005/11/24-18:28:02 COMMIT;

2005/11/24-18:28:03 BEGIN;ROLLBACK;

2005/11/24-18:28:03 BEGIN;ROLLBACK;

2005/11/24-18:28:03 BEGIN;ROLLBACK;

2005/11/24-18:28:29 execute load_normal_users_username ('lantest')

2005/11/24-18:28:29 execute load_users (2)

2005/11/24-18:28:30 execute load_user_attrs (2)

2005/11/24-18:28:30 execute load_normal_users (2)

2005/11/24-18:28:30 execute load_voip_users (2)

2005/11/24-18:28:30 execute load_persistent_lan_users (2)

2005/11/24-18:28:30 execute load_caller_id_users (2)

2005/11/24-18:29:03 BEGIN;ROLLBACK;

2005/11/24-18:29:03 BEGIN;ROLLBACK;

2005/11/24-18:29:03 BEGIN;ROLLBACK;

2005/11/24-18:30:03 BEGIN;ROLLBACK;

2005/11/24-18:30:03 BEGIN;ROLLBACK;

2005/11/24-18:30:03 BEGIN;ROLLBACK;

2005/11/24-18:30:03 BEGIN;

2005/11/24-18:30:03 select change_user_credit(2,0);

2005/11/24-18:30:03 select insert_connection_log(2::bigint,0,'2005-11-24 18:28:30','2005-11-24 18:30:03','t',1::smallint,1,ARRAY['username','kill_reason','bytes_in','mac','ippool_ assigned_ip','bytes_out','station_ip','ippool','po rt','unique_id'],ARRAY['lantest','Maximum check online fails reached','0','00:50:BA:AB:A7:FC','217.219.74.219', '0','192.168.1.7','lantest','0','port']);

2005/11/24-18:30:03 COMMIT;

2005/11/24-18:31:03 BEGIN;ROLLBACK;

2005/11/24-18:31:03 BEGIN;ROLLBACK;

2005/11/24-18:31:03 BEGIN;ROLLBACK;

2005/11/24-18:32:03 BEGIN;ROLLBACK;

2005/11/24-18:32:03 BEGIN;ROLLBACK;

2005/11/24-18:32:03 BEGIN;ROLLBACK;

2005/11/24-18:33:02 BEGIN;

2005/11/24-18:33:02 COMMIT;

2005/11/24-18:33:03 BEGIN;ROLLBACK;

2005/11/24-18:33:03 BEGIN;ROLLBACK;

2005/11/24-18:33:03 BEGIN;ROLLBACK;

درپایان ازمحبت دوستانبرخلاص شدن از سردرگمی یکماهه متشکرم

---

موضوعات مشابه:

• The Security System detected an authentication error
• پیغام Error in authentication هنگام Enable کردن سوییچ
• Configuring User AAA authentication and 802.1X port-based authentication in GNS3
• Error Code: 407 Proxy Authentication Required
• Error: svc host.exe-Application Error

---

[a_arabbeigi]

مشكل شما توي تنظيمات Authentication هست.اونها رو چك كنيد تا بشه با يك Default Connection هم به سرور شما وصل شد.شما پروتوكلهاي Authentication رو دوباره تنظيم كن.

[reza.sa.ir]

سلام

ببینید به من این خطا را میده

Registering your computer on network
Error 734 The PPP link Control Protocol was terminated

من فایلهای options.pptpd و pptpd.conf را که دارم ازش استفاده می کنم اینجا میدازم


ببینید گیرش کجاست

******options.pptpd ******
lock

debug

name pptpd

proxyarp

nobsdcomp

nodeflate

#+mschap

#-chap

#-pap

+mschap-v2

require-mppe-128

ms-dns 192.168.0.1

plugin radius.so

lcp-echo-interval 20

lcp-echo-failure 6

nologfd


********pptpd.conf*********
################################################## #############################

# $Id: pptpd.conf,v 1.1 2005/02/28 12:59:06 farshad_kh Exp $

#

# Sample Poptop configuration file /etc/pptpd.conf

#

# Changes are effective when pptpd is restarted.

################################################## #############################

# TAG: ppp

# Path to the pppd program, default '/usr/sbin/pppd' on Linux

#

#ppp /usr/sbin/pppd

# TAG: option

# Specifies the location of the PPP options file.

# By default PPP looks in '/etc/ppp/options'

#

option /etc/ppp/options.pptpd

# TAG: debug

# Turns on (more) debugging to syslog

#

#debug

# TAG: stimeout

# Specifies timeout (in seconds) on starting ctrl connection

#

# stimeout 10

# TAG: noipparam

# Suppress the passing of the client's IP address to PPP, which is

# done by default otherwise.

#

#noipparam

# TAG: logwtmp

# Use wtmp(5) to record client connections and disconnections.

#

#logwtmp

# TAG: bcrelay <if>

# Turns on broadcast relay to clients from interface <if>

#

#bcrelay eth1

# TAG: localip

# TAG: remoteip

# Specifies the local and remote IP address ranges.

#

# Any addresses work as long as the local machine takes care of the

# routing. But if you want to use MS-Windows networking, you should

# use IP addresses out of the LAN address space and use the proxyarp

# option in the pppd options file, or run bcrelay.

#

# You can specify single IP addresses seperated by commas or you can

# specify ranges, or both. For example:

#

# 192.168.0.234,192.168.0.245-249,192.168.0.254

#

# IMPORTANT RESTRICTIONS:

#

# 1. No spaces are permitted between commas or within addresses.

#

# 2. If you give more IP addresses than MAX_CONNECTIONS, it will

# start at the beginning of the list and go until it gets

# MAX_CONNECTIONS IPs. Others will be ignored.

#

# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,

# you must type 234-238 if you mean this.

#

# 4. If you give a single localIP, that's ok - all local IPs will

# be set to the given one. You MUST still give at least one remote

# IP for each simultaneous client.

#

# (Recommended)

localip 192.168.1.9

#remoteip 192.168.0.234-238,192.168.0.245

# or

#localip 192.168.0.234-238,192.168.0.245

#remoteip 192.168.1.234-238,192.168.1.245

[reza.sa.ir]

سلام
مشکلم حل شد
ممنون

[ataei]

مشکل از چی بود؟؟؟؟

[ramin3281]

چه کار کردید که درست شد ؟