سلام دوستان
من میخوام یه درایو رو در هریک از سیستمهای یک کافی نت به طوری شر کنم که فقط سرور بش دسترسی داشته باشه.البته بدون نرم افزار.ممنون میشم اگه راهنمایی کنین...
موضوعات مشابه:
سلام دوستان
من میخوام یه درایو رو در هریک از سیستمهای یک کافی نت به طوری شر کنم که فقط سرور بش دسترسی داشته باشه.البته بدون نرم افزار.ممنون میشم اگه راهنمایی کنین...
موضوعات مشابه:
خیلی راحت می تونی بهش پرمیژن بدهی و فقط ادمین بتونه محتویات اونو ببینه
یا به آخر اسم فایل share شده یه علامت $ بذار
کار خیلی ساده ایه
شما توی سرور یه یوزر با ممبرشیب Administrator برای خودت میسازی ( به احتمال 99 % همونی هم که الان باهش لاین میکنی این ویژگی را داره )
بعد میری روی دستگاهی که میخوای داریو را شیر کنی:
Start => Control Panel => Folder Option => Tab e View=> Gozinye Akhat : Use Simpel File Sharing Ra Ghere Fal Con
توصیه میشه این کارو روی تمام کامپویوتر های کافی نت بکنی.
و همچنین توصیه میشه یه دونه عین اون یوزری که روی سرور لاگین میکنی روی تک تک کاینت ها با همون پسورد بسازی
خوب حالا میری پای سرور : داخل My Computer= > Tabe tools => Map Network Drive
حالا توی تب فولدر این جوری پر میکنی :
بعد هم اینتر و تمام
الته لازم به ذکر است که لینوکس این چیزا را نمیفهمه و همه چیز را نشون میده.
در مورد permission هم دقت کنید و آن را به شکل صحیح پیاده سازی نمایید.
مرسی دوست عزیز...ولی در قسمتی که username password می خواد هر چی میزنم کانکت نمیشه...مطمئنم که درست میزنم...کلاینتها باید در حالت administrator باشن؟
نکته مهم همین جاست اگه کامپوتر های توی شبکتون ویروسی نباشن مخصوصا اون کامپوتری که میخوای بهش وصل بشی ( سرویسی توشون ستاپ نشده باشه )
شما با داشتن یک یوزر Administrator با همان نام و پسورد ی که در سرور وجود داره بروی کلاینتی که میخای به هش وصل بشی باید بتوانید به راحتی به درایو اون کلاینت دسترسی پیدا کنید
لطفا دوباره تک تک مراحل بالا را به دقت چک کنید.
موفق باشید
برای وارد شدن از یوزر administrator استفاده کن .
Once the network has been checked / configured, you can access other systems viaUnlike the XP Home-Edition, where the system will display
"My Network Places"
To allow other systems to access data on your disks / in your folders, you have to give
Permission for this : you have to share your disks and/or folders :
(the procedure for sharing on the Professional Edition is different to Sharing on XP Home )
Select the disk to be shared (for example in "My Computer") and right-click on the icon
of the disk to get the Context / popup-menu, select "Sharing and Security" :
some additional information concerning security issues,
you are as a user of Windows XP Professional expect to
know what you are doing and you have to handle yourself
any seruity issue
Sharing only folders is more
selective and not such a high
security problem :
Once you have selected the
folder to be shared, make
either a Right-click to select
"Sharing and Security..."
or select from the
"File and Folder Tasks"
(on the left side) to :
"Share this folder"If you have installed Windows XP Professional
and you get this windows for Sharing, then your
system is configured for "Simple File Sharing"
(same method as in Sharing for Windows XP Home) :
(see also Windows XP Simple Sharing and ForceGuest of
the Windows XP Professional Resource Kit )
Your choice :
You can follow the suggestion of Microsoft
and work also on Windows XP Professional
with "Simple File Sharing", then please
follow the procedure for Sharing on
Windows XP Home.
Or you can turn off "Simple File Sharing"
and work with File-Sharing like on
Windows 2000 ( shown below) .
Open "My Comuter" and select from the
menu "Tools" to Display the "Folder Options..." :
Tab : "View", section "Advanced settings" :
Look for "Use simple file sharing (Recommended"
To deactivate the "Simple File Sharing",
uncheck the option :
The process of sharing a disk or folder is identical
to the procedure used on Windows NT4 and Windows 2000.
There is already an "invisible" disk-sharing (C$, D$,...),
allowing network administrator to access the disk.
To create a share, which will be displayed in the
Network Neighborhood, create a "New Share".Enter the name of the share, as to be used on the network
and as to be displayed in the Network Neighborhood.
You can change the "Permisisons"By default, all users defined on your XP Professional
system will have full permisisons.
You can reduce the permissons (for example to allow
only Read-access ) and/or you could add a different
group of users to have access permisison (but then you
should delete the group "Everyone" from this list).You can then select the different share-names from
the drop-down list, to be able to view/modify the
permissions or to remove the sharing.Once a disk or folder is shared, the icon will show it via the "holding hand :"
On NTFS disks / partitions, you can also controll access via Security.
You can check the usage of the shared resource via the network (files used, users connected).
مرسی دوستان عزیز...انجام شد...