نمایش نتایج: از شماره 1 تا 2 از مجموع 2
سپاس ها 1سپاس

موضوع: Installing Cisco UCM 7.x in VMWare

  
  1. #1
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272

    Installing Cisco UCM 7.x in VMWare

    کد:
    http://blog.chackraview.net/2009/12/25/installing-cisco-ucm-7-x-in-vmware/
    Being a VoIP Security researcher, I need seamless access to variety of Call managers. Its always better to have a small lab setup in your home for offline research requirements.
    When one think about setting up a low budget, realistic lab, virtualization is the first thing comes in the mind. Today i will walk you through the step by step installation of Cisco Unified Communication Manager 7.0 under VMWare. Though this post cover installation of CUCM 7.0, all the installation steps can also be applied to installation of Cisco 6.x UCM.
    Before we start for the actual installation procedure, following are some of the prerequisites for Cisco UCM installation.

    • Minimum 80 GB free Hard disk space
    • Minimum 1024 MB RAM
    • One network interface

    Unlike CUCM 4.x, Cisco UCM 6.x and onwards are based on CentOS 5.x .

    My Laptop Configuration



    • CPU: Pentium 4 2.2 GHZ Intel Core 2 Duo
    • RAM: 4.0 GB DDR2 RAM
    • HDD: 320 GB SATA HDD
    • NIC: Broadcom Fast Ethernet Card
    • OS: Windows 7
    • VMware Version: VMware Workstaton 7.0

    
    VMWare Configuration


    • Guest Operating System: Redhat Enterprise Linux 4
    • Physical Memory: 1 GB
    • Hard Disk size : 80 GB of HDD with files splited into 2GB files. Splitting of file helps improving memory Management.
    • Network Card: Single Ethernet Card configured in “Brigde mode”.

    Before you begin, you will need installation DVD of Cisco Unified Communication Manager 7.0. CUCM 7.0 ISO image is also available on piratebay. You can download the torrent from link provided in reference section of this post.
    Following are the exact steps for UCM 7.0 installation. I have provided screenshots for some of the installation steps.

    • Start the virtual machine and after a while Cisco UCM installer will warn you saying unsupported platform detected. It displys following box saying CUCM installed on VMWare will not be supported by TAC team and will not be used in product system environment. Click “Agree” and proceed.
      The good part about Cisco is even after detecting VMWare, it is allowing user to continue with installation procedure.

    VMWare warning message


    • Select Cisco Unified Communication manager as a product to be installed and hit “OK” and proceed with installation.

    Choose CUCM from poduct list


    • Installer will now ask to complete pre-installation tasks, hit “skip” to start actual installation procedure. Installer will now install the Redhat base operating system with required packages like – JAVA, struts, Apache-tomcat, Perl, Python etc

    Redhat base OS installation

    Once base installation is complete, post install script will do the actual UCM related setup and configurations. These includes -

    • Installation of UCM specific scripts
    • Installation of UCM database

    Installer will restart the virtual machine and again continue with the installation.

    • Installer will ask if you have pre-existing platform configuration files. Hit “Continue” to proceed further and create new configuration.
    • Select “No” to apply upgrade patch installation.
    • Select “No” to import data from windows version of CUCM.
    • Select the timezone and let installer negotiate ethernet NIC speed.
    • Select the default MTU size.
    • Select “No” to DHCP server installation and set hostname/IP address of UCM server. Setup will restart the network environment and continue.
    • If you have valid DNS server setup in your network. Select “Yes” to enable DNS client on UCM otherwise select “No”.

    Self signed Certificate Configuration


    • Now configure Administrator Username/password and provide information needed to create self signed certificate. This information includes – Organization Name, Organization Unit, Location, State,Country
    • Choose “yes” to setup UCM as first node in the UCM cluster.
    • Choose “No” to skip external NTP setup and in the next screen Configure Time settings.

    Configure Time settings


    • Configure Security password used for secure communication between two UCM nodes.
    • Select “No” for SMTP configuration.

    Security password


    • Configure login credential for Web console administration. This step will complete the UCM platform configuration.
    • Now UCM installer will install remaining script and complete remaining configuration. This step usually takes 40 minutes for completion.

    Final Configuration step


    • If everything goes right, installer will reboot the virtual machine and greet you with login prompt.
    • Now start firfox and browse https://ucmipaddress to login in UCM web console.

    CUCM Web Console


    • Click on System->Licensing->License Unit Report to view license unit allocated for your newly installed UCM.

    Default Licensing Units

    Starting UCM services and adding devices

    Now we have our UCM installed, lets activate its services to make it fully functional. Unless we activate UCM call manager and TFTP services; we will not be able to add/register any devices with our call manager.
    To activate the services -

    • Browse https://<ucmip>/ccmservice and login with admin credentials.
    • Navigate to Tools->Service Activation sub-menu.
    • Select all services and click on “save” button to activate selected services.

    Activating UCM services

    Once UCM services are activated, CCM Node License feature will decrement 1 CCM license unit. Now let’s try adding one device to our newly installed UCM.

    • Go to https://<ucmip>/ccmadmin
    • Login with admin credentials
    • Navigate to Device->Phone menu and click on “Add new” button from top left corner.
    • Select appropriate phone type, protocol along with phone details like MAC address, device security profile, button template.
    • Click “Save” to add device

    DLU Consumed by single CCM and single 7960 IP Phone

    Once device gets successfully added, appropriate DLU’s will get consumed from the available license units. Above screen shot shows DLU status after activating UCM services and addition of single 7960 IP phone.
    As you add new devices and activate different services on UCM, respective DLU’s gets consumed. Once DLU count reaches to zero, you need to purchase new DLU licenses from Cisco




    موضوعات مشابه:
    hmn566 سپاسگزاری کرده است.

  2. #2
    نام حقيقي: Hooman

    عضو عادی شناسه تصویری hmn566
    تاریخ عضویت
    Apr 2004
    محل سکونت
    Tehran
    نوشته
    639
    سپاسگزاری شده
    107
    سپاسگزاری کرده
    33
    آقا ممنون
    مشکل ظرفیت هارد بود. یک هارد ظرفبت بالا گذاشتم و 80 گیگ برای CUCM قرار دادم و نصب شد.
    البته رو VMWARE SERVER نصب کردم.


    ویرایش توسط hmn566 : 2010-05-31 در ساعت 04:46 PM

کلمات کلیدی در جستجوها:

cisco unified meetingplace single mode password

call manager

minimum mtu size in ethernet

nexus 1000v

cisco call manager

nexus 1000 v

Cisco Meetingplace vmware image

cucm services not activated vmware

cisco call manager vmware image torrent

Cisco CallManager 4.3 VMWare Image torrent

Cisco Unified MeetingPlace iso

nexus 1000

this is an invalid platform for cisco meeting express

vmware server user guide فارسی

minimum mtu size

meeting place express 2.1.1.2 vmware invalid platform !

licence cucm 7

free Cisco unified meeting place express licence

vmware is not a supported platform

cucm install

cisco ip phone

cucm 7.x torrent

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •