فراموشی رمز عبور ILOدر سرور HP

[halvaei]

سلام دوستان
متاسفانه من رمز ورود به ILO سرور اچ پی را فراموش کرده ام
کسی راه حلی برای بازیابی داره؟

[Hootan]

باید در سرور رو باز کنید.
یه Jumper هست که باید اونو Reset کنید تا رمز Rest بشه .

به User Manuals سرور مراجه کنید ببینید این Jumper دقیقاً کجاست . مدل به مدل فرق میکنه .

[th95]

1) use the iLO security override switch. This will allow access to RBSU, and there you can set the password as desired.
Note: you cannot extract the current password.

2) you can reset iLO to defaults, and the password will be set according to the hood label.

3) use the online host-based scripting utility, HPONCFG, and a "set password" script from within the OS on the host to set the desired password or to create a user account with known credentials.

[halvaei]

میشه بیشتر توضیح بدید؟

[th95]

راه اول

Steps

• 1
  Connect a keyboard, mouse and monitor to the back of the server.
  
• 2
  Plug the server into a power source. If there are multiple slots for power cords, plug them all in.
• 3
  Connect the server to a router that has an internet connection.
• 4
  Power up the server while watching the monitor. If the server was already on, turn it off and then on again.
• 5
  Wait for the message "Integrated lights-out server, press <F8> to continue." This will happen shortly after an HP Prolite graphic appears.
• 6
  Press F8 and go to Users.
• 7
  Scroll down to Edit and select Administrator.
• 8
  Change the password as desired and press F10 to save.
• 9
  Go to Network and select Information.
• 10
  Write down the IP address and press Esc to return to the previous menu.
• 11
  Go to File and select Exit to quit.
• 12
  On your computer, enter in the IP address that you wrote down into a browser and log in using the name Administrator and your new password.

راه دوم

• If you have access to running windows system, you can use hponcfg command included in "HP Lights-Out Online Configuration Utility".
• Its basically a command line tool that takes an XML file as input for ILO configuration settings. To get the utility to work, we had to install the following:
• 1. HP Proliant iLO Advanced and Enhanced System Management Controller Driver
• 2. HP Proliant Integrated Lights-Out Management Interface Driver
• 3. HP Lights-Out Online Configuration Utility
• 4. HP Insight Diagnostics Online Edition
• Usage:
• 1. C:\Program Files\HP\hponcfg>hponcfg /w ilo_ip.xml - Exports configuration
• 2. Edit ilo_ip.xml to reflect your wishes
• 3. C:\Program Files\HP\hponcfg>hponcfg /f ilo_ip.xml - Imports configuration
• thank you teoheras(dot)blogspot(dot)com for his hp-remote-management-ilo.html
• There is also GUI version at C:\Program Files\HP\hponcfg\hponcfg_gui.exe

[SADEGH65]

میشه بیشتر توضیح بدید؟

حلوایی جان ببین شما بستگی دارد که به سرور به چه صورتی دسترسی دارید .
به عنوان مثال اگر ریبوت کردن سیستم برایتان سخت نیست در هنگام بوت شدن سرور و در اولین گزینه ها همانطوری که محمد عزیز هم نوشتند با زدن دکمه F8 وارد تنظیمات ILO بشوید و هر موردی را که میخواهید تغییر دهید.

[halvaei]

با تشکر هز آقای گنجی و آقای نجاتی زاده .مشکل رو با استفاده از پاسخ آقای گنجی به روش اول حل کردم.