فراموشی رمز عبور ILOدر سرور HP

سلام دوستان
متاسفانه من رمز ورود به ILO سرور اچ پی را فراموش کرده ام
کسی راه حلی برای بازیابی داره؟

باید در سرور رو باز کنید.
یه Jumper هست که باید اونو Reset کنید تا رمز Rest بشه .

به User Manuals سرور مراجه کنید ببینید این Jumper دقیقاً کجاست . مدل به مدل فرق میکنه .:)

1) use the iLO security override switch. This will allow access to RBSU, and there you can set the password as desired.
Note: you cannot extract the current password.

2) you can reset iLO to defaults, and the password will be set according to the hood label.

3) use the online host-based scripting utility, HPONCFG, and a "set password" script from within the OS on the host to set the desired password or to create a user account with known credentials.

میشه بیشتر توضیح بدید؟

راه اول

[B]Steps[/B]


[LIST][*]1
[B]Connect a keyboard, mouse and monitor to the back of the server[/B].
[*]2
[B]Plug the server into a power source[/B]. If there are multiple slots for power cords, plug them all in.[*]3
[B]Connect the server to a router that has an internet connection[/B].[*]4
[B]Power up the server while watching the monitor[/B]. If the server was already on, turn it off and then on again.[*]5
[B]Wait for the message "Integrated lights-out server, press <F8> to continue[/B]." This will happen shortly after an HP Prolite graphic appears.[*]6
[B]Press F8 and go to Users[/B].[*]7
[B]Scroll down to Edit and select Administrator[/B].[*]8
[B]Change the password as desired and press F10 to save[/B].[*]9
[B]Go to Network and select Information[/B].[*]10
[B]Write down the IP address and press Esc to return to the previous menu[/B].[*]11
[B]Go to File and select Exit to quit[/B].[*]12
[B]On your computer, enter in the IP address that you wrote down into a browser and log in using the name Administrator and your new password[/B].[/LIST]

راه دوم


[LIST][*]If you have access to running windows system, you can use hponcfg command included in "HP Lights-Out Online Configuration Utility".[*]Its basically a command line tool that takes an XML file as input for ILO configuration settings. To get the utility to work, we had to install the following:[*]1. HP Proliant iLO Advanced and Enhanced System Management Controller Driver[*]2. HP Proliant Integrated Lights-Out Management Interface Driver[*]3. HP Lights-Out Online Configuration Utility[*]4. HP Insight Diagnostics Online Edition[*]Usage:[*]1. C:\Program Files\HP\hponcfg>hponcfg /w ilo_ip.xml - Exports configuration[*]2. Edit ilo_ip.xml to reflect your wishes[*]3. C:\Program Files\HP\hponcfg>hponcfg /f ilo_ip.xml - Imports configuration[*]thank you teoheras(dot)blogspot(dot)com for his hp-remote-management-ilo.html[*]There is also GUI version at C:\Program Files\HP\hponcfg\hponcfg_gui.exe[/LIST]

[QUOTE=halvaei;314689]میشه بیشتر توضیح بدید؟[/QUOTE]

حلوایی جان ببین شما بستگی دارد که به سرور به چه صورتی دسترسی دارید .
به عنوان مثال اگر ریبوت کردن سیستم برایتان سخت نیست در هنگام بوت شدن سرور و در اولین گزینه ها همانطوری که محمد عزیز هم نوشتند با زدن دکمه F8 وارد تنظیمات ILO بشوید و هر موردی را که میخواهید تغییر دهید.

با تشکر هز آقای گنجی و آقای نجاتی زاده .مشکل رو با استفاده از پاسخ آقای گنجی به روش اول حل کردم.