مودم اینترنت و port 23

[alins5]

سلام دوستان
آیا روشی وجود داره ک بتونم port 23 رو بر روی modem wag54g2باز کنم؟؟

---

موضوعات مشابه:

• فرق port forwarding و port mapping
• ایجاد و پیکربندی port forwarding و یا port redirecting در آیزا 2006
• فرق بین port forwarding و port mapping
• ASA Port Redirction - Port Forwarding

---

[alins5]

دوستان کسی نیست ب من کمک کنه

[deltapars]

معمولا تمام مودم ها در قسمت sequrity محدود کردن پورت داره که یا پیش فرض و اماده هست باید تیک بخوره یا باید add کنید. یه سر به سایت شرکتش بزنی دستگیرت میشه چی میگم.موفق باشی

[SADEGH65]

به صورت کامل بر روی این لینک توضیح داده شده است

Port Forwarding - Linksys - WAG54G2 (Linksys Firmware) | PcWinTech.com?

Port Forwarding - Linksys - WAG54G2 (Linksys Firmware)



Linksys - WAG54G2 (Linksys Firmware)

Port Forwarding Guide Step 1.
Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.
Step 2.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address?


Step 3.
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.
Once logged into your router click on "Applications & Gaming"
Once the page has loaded click on "Port Range Forwarding"

Click To View Full Picture
Step 5.
Give your entry a name in the "Applications" field.
In "Start" enter the starting port to be forwarded.
Example: 2100
In "End" enter the ending port to be forwarded.
Example: 3100
Next choose the "Protocol" you want to use.
Enter the computers IP address in "IP Address"
Be sure to check "Enable"
Repeat step 5 for any more ports you want to forward.
Click on "Save Settings"
All Done!

Click To View Full Picture

[alins5]

با تشکر از دوستان
من می خوام خود portمودم رو باز کنم
تا بتونم با command Pro خود windowsمودم رو reboot کنم
با تشکر

[aliafzalan]

سلام
اگر منظورتون اینه که بشه با telnet به این مودم وصل شد، این مودم telnet رو ساپورت نمیکنه.

[alins5]

پس باید جه کار کنم