کد:
http://www.delltechcenter.com/page/VMware+vSphere+FT+Step+by+Step+Example
1. Image depicting the Network configuration.



2. Turning on FT.



3. 54% through setting up FT.



4. FT setup complete.



5. vLockstep Interval and Log Bandwidth information are now updated.



6. Primary VM is located on 10.10.10.146.



7. Secondary VM is running on the Secondary Host- 10.10.10.145.



8. Testing FT using the built in Test Failover command.



9. Failover test completes. Notice that 10.10.10.146 has become the secondary location.



10. After the Failover Test, the primary host server is now 10.10.10.145 and the primary VM is running on it.



11. Furthermore, after the Failover Test, the secondary VM runs on the secondary host server, 10.10.10.146.



12. Failover test completion will result in showing the primary VM on the new primary host server and the new secondary host server with the accompanying vLockstep Interval and Log Bandwidth.



13. Finally, VMware vSphere FT is ready to provide continuous protection to your VMs




موضوعات مشابه: