اموزش اتصال روتر rb 951 ui به مودم یواس بی دی لینک سیم کارت خور

[mohammad16]

با سلام لطفا اموزش اتصال و اینترنت دار کردن روتر میکروتیک rb951ui از طریق مودم سیم کارت خور دی لینک -تنظیمات کانکش مخصوص سیم کارت از طریق یواس بی - را میخواستم باتشکر

---

موضوعات مشابه:

• اتصال شبکه سیمی به مودم روتر دار و اشتراک آن
• آموزش تصویری اتصال شبکه دو لپ تاپ یا کامپیوتر به صورت بی سیم بدون روتر
• اتصال به یک شبکه بی سیم خارجی بوسیله مودم روتر وایرلس
• تقسیم یک داریور به دو داریور در ویندوز 2000 Advance

---

[peymansh]

باید lte کانکشن بسازید

[mohammad16]

باید lte کانکشن بسازید

دوست عزیزلطف میکنید اموزشش درقالب فایل pdfیا تصویری بزارید تشکر

[hamedelnin]

Wirelessinfo.be

[mohammad16]

The 3G portion closer look

Plug the Vodafone 3G modem in Mikrotik Router Board, the LED on the 3G modem flashes green.
To see if the Mikrotik Router Board 3G modem detects click "System" and then "Resources".
Click on through to "USB".
Click the right mouse button and click "detail mode" to see more.
The Vodafone modem is recognized, you see at ports 0 but it does not, we will not work with PPP.
If you're in "interfaces" button you will see assist the 3G modem as LTE1 who are we going to change the name. Double-click this interface. LTE means Long Time Evolution .
Attention! If the LTE interface does not appear you must disconnect the router board power. wait 10 to 20 seconds range and start the router back on board. It may be that the problem is solved and the LTE interface still emerges.
When "name" you specify the interface named "3G modem, click on" apply "then" ok ".
So, now the 3G modem and all interfaces are clearly recognizable.
DHCP client set the Vodafone 3G modem K4305

As the 3G modem does not PPP settings, we proceed as if the 3G modem interface.Therefore, we will configure a DHCP client on the 3G modem.
Select Interface "3G modem" and click on "apply" and "ok".
3G modem, the router board given an IP address, refer to the status "bound".
Natten between Wan (3G modem) and LAN (private network).

NAT is necessary to separate from the public network (WAN), the LAN portion (your private network).
Click "IP" and then on "Firewall".
Click on through "NAT" and click the blue cross to bring in a NAT rule.

• By "chain" let you stand "srcnat".
• With "out interface" select "3G modem"

Click further on "action" and select "masquerade". Click "apply" then "ok".
سلام دوستان من تمام مراحل را انجام دادم اما کانکشن elt در قسمت انترفیس ساخته نشد واضافه نشد مشکل از کجا ممکنه مودم را شناسایی نکرده باشه؟

[mazyaar]

The 3G portion closer look

Plug the Vodafone 3G modem in Mikrotik Router Board, the LED on the 3G modem flashes green.
To see if the Mikrotik Router Board 3G modem detects click "System" and then "Resources".
Click on through to "USB".
Click the right mouse button and click "detail mode" to see more.
The Vodafone modem is recognized, you see at ports 0 but it does not, we will not work with PPP.
If you're in "interfaces" button you will see assist the 3G modem as LTE1 who are we going to change the name. Double-click this interface. LTE means Long Time Evolution .
Attention! If the LTE interface does not appear you must disconnect the router board power. wait 10 to 20 seconds range and start the router back on board. It may be that the problem is solved and the LTE interface still emerges.
When "name" you specify the interface named "3G modem, click on" apply "then" ok ".
So, now the 3G modem and all interfaces are clearly recognizable.
DHCP client set the Vodafone 3G modem K4305

As the 3G modem does not PPP settings, we proceed as if the 3G modem interface.Therefore, we will configure a DHCP client on the 3G modem.
Select Interface "3G modem" and click on "apply" and "ok".
3G modem, the router board given an IP address, refer to the status "bound".
Natten between Wan (3G modem) and LAN (private network).

NAT is necessary to separate from the public network (WAN), the LAN portion (your private network).
Click "IP" and then on "Firewall".
Click on through "NAT" and click the blue cross to bring in a NAT rule.

• By "chain" let you stand "srcnat".
• With "out interface" select "3G modem"

Click further on "action" and select "masquerade". Click "apply" then "ok".
سلام دوستان من تمام مراحل را انجام دادم اما کانکشن elt در قسمت انترفیس ساخته نشد واضافه نشد مشکل از کجا ممکنه مودم را شناسایی نکرده باشه؟

مودم بايد سيستم عامل هاي تحت لينوكس رو بتونه ساپورت كنه اگه نتونه سخت افزار جديد روي سيستم عامل خوانده نميشه



Sent from my iPhone using Tapatalk

[mjzaret]

يكي از مشكلاتي كه كاربران ايراني با اين موضوع خواهند داشت اينه كه ميكروتيك درايور هيچ يكي از مودم​هاي 3G كه در ايران پيدا ميشه رو در روترش قرار نداده.

براي همين يه سر به سايت خود ميكروتيك بزنيد.

در اونجا اعلام كرده فقط از يه سري مودمهاي خاص پشتيباني صورت مي​گيرد.

شاد باشيد