مشکل در تنظیم squid

با سلام،

ممنون میشم از دوستان ، به من کمک کنید.

Squid 3.1.8
CentOS 5.6
radius_authenticator 1.10

[B]لاگ:[/B]

[QUOTE]2012/03/27 01:46:02| Starting Squid Cache version 3.1.8 for i386-redhat-linux-gnu...
2012/03/27 01:46:02| Process ID 5151
2012/03/27 01:46:02| With 1024 file descriptors available
2012/03/27 01:46:02| Initializing IP Cache...
2012/03/27 01:46:02| DNS Socket created at 0.0.0.0, FD 7
2012/03/27 01:46:02| Adding domain localhost from /etc/resolv.conf
2012/03/27 01:46:02| Adding nameserver 4.2.2.4 from /etc/resolv.conf
2012/03/27 01:46:02| Adding nameserver 8.8.8.8 from /etc/resolv.conf
2012/03/27 01:46:02| helperOpenServers: Starting 5/5 'squid_radius_auth' processes
2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied
2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied
2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied
2012/03/27 01:46:02| User-Agent logging is disabled.
2012/03/27 01:46:02| Referer logging is disabled.
2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied
2012/03/27 01:46:02| Unlinkd pipe opened on FD 22
2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied
2012/03/27 01:46:02| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2012/03/27 01:46:02| Store logging disabled
2012/03/27 01:46:02| Swap maxSize 0 + 262144 KB, estimated 20164 objects
2012/03/27 01:46:02| Target number of buckets: 1008
2012/03/27 01:46:02| Using 8192 Store buckets
2012/03/27 01:46:02| Max Mem size: 262144 KB
2012/03/27 01:46:02| Max Swap size: 0 KB
2012/03/27 01:46:02| Using Least Load store dir selection
2012/03/27 01:46:02| Current Directory is /
2012/03/27 01:46:02| Loaded Icons.
2012/03/27 01:46:02| Accepting HTTP connections at 0.0.0.0:3128, FD 23.
2012/03/27 01:46:02| HTCP Disabled.
2012/03/27 01:46:02| Squid modules loaded: 0
2012/03/27 01:46:02| Adaptation support is off.
2012/03/27 01:46:02| Ready to serve requests.
2012/03/27 01:46:02| WARNING: basicauthenticator #5 (FD 16) exited
2012/03/27 01:46:02| WARNING: basicauthenticator #4 (FD 14) exited
2012/03/27 01:46:02| WARNING: basicauthenticator #3 (FD 12) exited
2012/03/27 01:46:02| WARNING: basicauthenticator #2 (FD 10) exited
2012/03/27 01:46:02| Too few basicauthenticator processes are running
2012/03/27 01:46:02| storeDirWriteCleanLogs: Starting...
2012/03/27 01:46:02| Finished. Wrote 0 entries.
2012/03/27 01:46:02| Took 0.00 seconds ( 0.00 entries/sec).
FATAL: The basicauthenticator helpers are crashing too rapidly, need help!

Squid Cache (Version 3.1.8): Terminated abnormally.
CPU Usage: 0.023 seconds = 0.017 user + 0.006 sys
Maximum Resident Size: 33280 KB
Page faults with physical i/o: 0
Memory usage for squid via mallinfo():
total space in arena: 2680 KB
Ordinary blocks: 2605 KB 13 blks
Small blocks: 0 KB 0 blks
Holding blocks: 1012 KB 4 blks
Free Small blocks: 0 KB
Free Ordinary blocks: 74 KB
Total in use: 3617 KB 135%
Total free: 74 KB 3%
[/QUOTE]

[B]کانفیگ:[/B]

[QUOTE]# TAG: auth_param
#Authentication Radius:
auth_param basic program /usr/local/squid/libexec/squid_radius_auth -f /usr/local/squid/etc/squid_radius_auth.conf
auth_param basic children 5
auth_param basic realm Web Authentication
auth_param basic credentialsttl 2 hours
acl radius-auth proxy_auth REQUIRED

# TAG: http_access
# Allow authorized users:
http_access allow radius-auth
http_port 3128

[/QUOTE]

[B]پیام خط فرمان:[/B]

[QUOTE]
[root@open ~]# service squid start
Starting squid: [ OK ]
[root@open ~]# service squid status
squid (pid 5397) is running...
squid: ERROR: Could not send signal 0 to process 5420: (3) No such process
[root@open ~]# service squid status
squid dead but pid file exists

[/QUOTE]

با اسکوئید 2.6 و 2.7 هم تست شده ، همین مشکل هست.

با سپاس.

میخواهید Squid همراه Radius اجرا شود ؟

[QUOTE=darklove;349074]میخواهید Squid همراه Radius اجرا شود ؟[/QUOTE]

بله دوست عزیز. من اسکوئید رو نصب کردم ، ماژول radius_authenticator رو هم گرفتم و نصب کردم. ماژول رو هم تست کردم و به درستی کار میکنه و authenticate میکنه. کانفیگ رو هم به همون ترتیبی که مشاهده میکنید ، تنظیم کردم.

اسکوئید با موفقیت استارت میشه و پس از چند ثانیه ، دوباره down میشه.

لاگ رو هم در پست پیشین تقدیم کردم.

ضمناً هم اسکوئید 2.6 رو توسط پکیج منجر centos نصب کردم و تست کردم و هم اسکوئید 3.1 رو از مخزن redhat پیدا کردم و تست کردم. با هر دو این مشکل رو دارم متاسفانه. من حدس میزنم ، هر مشکلی هست ، در این خط باشه:

[QUOTE]2012/03/27 01:46:02| ipcCreate: /usr/local/squid/libexec/squid_radius_auth: (13) Permission denied[/QUOTE]

ممنون میشم اگر من رو راهنمایی بفرمایید.

به فایل و فولدر Permission بدهید.