سلام خدمت اساتید عزیز
من میخواستم پورت فورواردینگ روی isa راه اندازی کنم تا یه جاهایی هم انجام دادم ولی نمیدونم درسته یا نه
یه مودم Adsl دارم با رنج شبکه 192.168.1.0
و شبکه داخلی با رنج 192.168.30.0
isa server : internal 192.168.0.2
isa sertver External : 192.168.1.2
حسابداری :192.168.0.1
میخوام نرم افزار حسابداریه از طریق ip static قابل رویت باشه که Ip هم از شرکتی که Adsl رو گرفتم گرفتم
پورت نرم افزار تحت وب رو به :81 عوض کردم و تنظیمات port forwarding رو روی مودم انجام دادم (192.168.0.1:81)
نمیدونم درسته یا نه آیا باید به isa فوروارد کنم یا خوده سروره حسابداری ؟؟؟؟؟؟
یه سری تنظیمات publishing رو هم انجام دادم
[LTR]
1.Start the ISA Server 2006 Management Console
2.Choose Firewall Policy in the left-hand pane of the console.
3.Select the Tasks tab in the right-hand pane of the console.
4.Choose Publish Web Sites under Firewall Policy Tasks to start the New Web Publishing Rule Wizard.
5.Enter a name for your web publishing rule and click Next.
6.Make sure Allow is selected for the action and click Next.
7.Choose Publish a single Web site or load balancer and click Next.
8.Choose Use non-secured connections to connect the published Web server or server farm and click Next.
9.Enter the Internal site name and Computer name or IP address of the PASSPORT WEB TO HOST server or Browse to select and click Next.
10.Click Next if you don't have an optional path. Otherwise add it here.
11.If a domain name has been registered, you may enter it under Public Name, otherwise, enter one of the IP addresses assigned to the external interface of the ISA Server and click Next.
12.Click the New button to start the New Web Listener Wizard.
13.Enter a name for the Web Listener and click Next.
14.Choose Do not require SSL secured connections with clients and click Next.
15.Enable the check box next to the External Interface and click the Select IP Addresses… button.
16.Choose the Specified IP addresses on the ISA Server computer in the selected network radio button, select the appropriate address to add (one of the IP addresses assigned to the external interface of the ISA Server used in step 11) then click OK then Next to finish.
17.Select No Authentication (on Authentication Settings) then click Next®Next®Finish®Next.
18.Choose No delegation and client cannot authenticate directly (on Authentication Delegation) and click Next.
19.To allow anonymous access leave the All Users set in the list and click Next. To prompt users for credentials, remove All Users and replace with a user set that contains the appropriate network users.
20.Click Finish and then Apply to save the changes.
البته قسمت 11 رو متوجه نشدم که باید از چه ip استفاده کنم internal , external , static ???????????
آیا باید کار دیگه ای هم انجام بدم
پیشاپیش ممنون از جوابتون
موضوعات مشابه:
- فرق port forwarding و port mapping
- ایجاد و پیکربندی port forwarding و یا port redirecting در آیزا 2006
- فرق بین port forwarding و port mapping
- [حل شده] Port Forwarding
- ASA Port Redirction - Port Forwarding