LinkBack URL
About LinkBacks
سلام
يه سرور هست كه روش ويندوز سرور 2003 نصب است ولي بوت نميشود!!!
: Please select the operating system to start
windows Server 2003 Enterprise
Boot Mirror C: -secondary plex
من گزينه اول و دوم رو انتخاب ميكنم و براي هردو با پيام زير مواجه ميشم:
خوب همانطور كه گفته شده من ويندوز رو repair ميكنم. براي اينكار از دستور Fixmbr استفاده ميكنم :: Windows Could not start because the following file is missing or corrupt
windows\system32\config\system
You can attempt to repair this file by starting windows Setup
using the original Setup CD-ROM
Select 'r' at the first screen to start repair.
خوب تا اينجا مشكلي نيست و مشكل اصلي اينجاست كه و قتي ميخواهم از دستور bootcfg /scan استفاده كنم به اين پيام برخور ميكنم :C:\>Fixmbr
.fixmbr may damage your partition tables if you proceed
.This could cause all the partitions on the current hard disk to become inaccesible
.If you are not having problems accessing your drive to not continue
Are you sure you want to write a new MBR? Y
.writing new master boot record on physical drive \device\harddisk1\partition0
.the new master boot record has been successfully written
C:\>bootcfg /scan
.scanning all disks for windows installations
...please wait since this may take a while
Error : Failed to successfully scan disks for windows installations.
.this error may be caused by a corrupt file system which would prevent bootcfg form successfully scanning
.detect any disk errors
note:this operation must complete successfully in order for the
.add or /rebuild commands to be utilized/
سوال :
چرا اين پيام رو به من نمايش ميده؟
دستور bootcfg /rebuild رو هم امتحان كردم. همين مشكل بود.
fixboot مشكلي نداره و اجرا ميشه راحت.
متشكرم
موضوعات مشابه:
- Windows Server 2003 R2, Enterprise Edition with SP2 | ویندوز سرور 2003
- حد اکثر ساپورت Windows Server 2003 Enterprise R2 64 bit
- windows 2003 server enterprise(فوري)
- Windows Server 2003 Enterprise Edition R2
