نمایش نتایج: از شماره 1 تا 7 از مجموع 7
سپاس ها 6سپاس
  • 1 توسط SADEGH65
  • 3 توسط patris1
  • 2 توسط yhashemi

موضوع: دو سرور DHCP با یک Range IP

  
  1. #1


    عضو عادی
    تاریخ عضویت
    Dec 2006
    نوشته
    127
    سپاسگزاری شده
    8
    سپاسگزاری کرده
    6

    دو سرور DHCP با یک Range IP

    سلام دوستان
    آیا میشه دو DHCP Server روی دو تا سرور با ویندوزهای Server 2003 Ent. R2 بطور همزمان داشته باشیم که دارای یک Range IP باشند؟
    در جائی خوندم میشه ولی مگه ممکنه conflict IP اتفاق نیفته؟



    موضوعات مشابه:

  2. #2
    نام حقيقي: حامد

    عضو عادی
    تاریخ عضویت
    Sep 2009
    محل سکونت
    تهران
    نوشته
    121
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    75
    سلام
    درست خوندید میشه ولی conflict رخ میده



  3. #3
    نام حقيقي: صادق نجاتی زاده

    مدیر بازنشسته شناسه تصویری SADEGH65
    تاریخ عضویت
    Nov 2003
    محل سکونت
    تهران
    نوشته
    2,264
    سپاسگزاری شده
    3415
    سپاسگزاری کرده
    3619
    نوشته های وبلاگ
    12
    نقل قول نوشته اصلی توسط pesar_sheyton نمایش پست ها
    سلام دوستان
    آیا میشه دو DHCP Server روی دو تا سرور با ویندوزهای Server 2003 Ent. R2 بطور همزمان داشته باشیم که دارای یک Range IP باشند؟
    در جائی خوندم میشه ولی مگه ممکنه conflict IP اتفاق نیفته؟
    قرار نیست به هر 2 کل رنج را بدهید .
    در ضمن منظورتان از Conflict چیست ؟ (دادن یک IP به 2 سیستم و یا اشکال در دادن IP ?)


    hamedit سپاسگزاری کرده است.

  4. #4
    نام حقيقي: حامد

    عضو عادی
    تاریخ عضویت
    Sep 2009
    محل سکونت
    تهران
    نوشته
    121
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    75
    در ضمن منظورتان از Conflict چیست ؟ (دادن یک IP به 2 سیستم و یا اشکال در دادن IP ?)
    سلام
    احتمالا منظورش همینه



  5. #5
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    فکر کنم منظورش Clustering باشه

    کد:
    http://technet.microsoft.com/en-us/library/cc958897.aspx

    Clustering DHCP Servers


    Windows Clustering allows two servers to be managed as a single system. The Windows 2000 (Advanced Server only) clustering service can be used for DHCP servers to provide higher availability, easier manageability, and greater scalability.

    Windows Clustering can automatically detect the failure of an application or server and quickly restart it on a surviving server, with users only experiencing a momentary pause in service. With Windows Clustering, administrators can quickly inspect the status of all cluster resources and easily move workloads around onto different servers within the cluster. This is useful for manual load balancing and for performing rolling updates on the servers without taking important data and applications offline.
    Windows Clustering allows DHCP servers to be virtualized so that if one of the clustered nodes crashes, the namespace and all the services are transparently reconstituted to the second node. This means no changes are visible to the client, which sees the same IP address for the clustered DHCP servers.
    Without clustering, network administrators might split scopes between servers, so if one server goes down, at least half of the available addresses remain available. Clustering uses IP addresses efficiently by removing the need to split scopes. A database stored on a remote disk tracks address assignment and other activity so that if the active cluster node goes down, the second node becomes the DHCP server, with complete knowledge of what has been assigned and access to the complete scope of addresses. Only one node at a time runs as a DHCP server, with the Windows 2000 clustering database providing transparent transition when needed.

    Example of Clustered DHCP Servers


    Figure 4.15 is a generic example of clustered DHCP servers. DHCP Server 1 is the active DHCP server, and DHCP Server 2 is the backup DHCP server.



    Figure 4.15 Clustered DHCP Servers

    In Figure 4.15:

    • DHCP Server 1 and DHCP Server 2 have Windows 2000 DHCP and Windows Clustering services installed.
    • Each DHCP server has a unique server name and IP address.
    • Each DHCP server has two network interfaces—one for the cluster identity and the connection to the enterprise network and the second for server-to-server communication. This is a private link only for cluster communication. The wire runs directly between the two servers.
    • Both DHCP servers are configured with identical scopes. However, on Server 2, the scopes are not activated because Server 2 is not currently functioning as the active DHCP server. DHCP Server 2 can function as a hot spare, ready in the event of a shutdown of DHCP Server 1.
    • To facilitate clustering and the sharing of resources, the DHCP servers are connected to an external disk system that holds the DHCP database and log files. This allows DHCP Server 2 to access the DHCP database files if it needs to take over as the active DHCP server. The clustering service installed on each DHCP server prevents one server from trying to exclusively claim the external disk and prevent sharing of the disk system between the DHCP servers.
    • The cluster itself has a unique name and IP address, so that DHCP clients can use the cluster name and IP address to connect to the cluster and request DHCP services. This prevents rejected DHCP client requests if one of the DHCP servers is turned off. For example, if the client was configured with a specific DHCP server name and IP address instead of the cluster address, the client would not receive DHCP services. However, by configuring the DHCP clients with the cluster name and IP address, the client is able to communicate with the active DHCP server in the cluster.

    Before implementing a similar scenario, consider the following recommendations:

    • On each DHCP server in the cluster (whether backup or primary), install the DHCP service before you install the clustering service.
    • Keep the second DHCP server turned off until the first server has the clustering service installed and is configured with a new cluster name and address. When the second server is turned on (and configured with DHCP and clustering services), it joins the existing cluster.
    • The cluster name and IP address must be statically configured—they cannot be configured dynamically by another DHCP server.
    • If a DHCP cluster is using an external disk system to store the DHCP database files, the DatabasePath and BackupDatabasePath registry entries must be configured on both DHCP servers in the cluster. The registry entries are located in
      HKLM\SYSTEM\CurrentControlSet\Services\DhcpServer\ Parameters
      These registry entries must specify the path to the external disk system.
    • Permissions: Any backup DHCP servers in the cluster will not be able to successfully take over DHCP tasks if the appropriate security permissions have not been enabled. Administrators must create a new domain security group to which the servers belong. This group must have permissions of Full Control for the DNS zone object in Active Directory where DHCP clients have their A and PTR records registered and updated. Alternatively, administrators can add the second server to the DNSUpdateProxyGroup for the domain. Otherwise, name resolution failures will result.
    • Use the 80/20 rule when implementing clustered DHCP servers to provide additionally enhanced "failover" (hot-spare) services. The combination of clustering DHCP servers and using the 80/20 rule to manage scopes between the clustered server enables an enhanced failover solution. See the sections "80/20 Rule" and "Best Practices" for details in specifying scopes using the 80/20 rule.





    Reza.D، hamedit و kian_gh سپاسگزاری کرده‌اند.

  6. #6
    نام حقيقي: hashem

    عضو عادی
    تاریخ عضویت
    Apr 2012
    محل سکونت
    esfahan
    نوشته
    410
    سپاسگزاری شده
    32
    سپاسگزاری کرده
    724
    سلام
    در ویندوز 7 و 2008 به چه ترتیب هست؟ این External disk برای چی و چه منظور استفاده میشه؟
    آیا منبع آموزش برای خود 7 و 2008 وجود داره؟



  7. #7
    نام حقيقي: Yaghoob Hashemi

    تازه وارد شناسه تصویری yhashemi
    تاریخ عضویت
    Dec 2012
    محل سکونت
    Tabriz
    نوشته
    17
    سپاسگزاری شده
    20
    سپاسگزاری کرده
    0
    سلام دوست عزیزم
    اگر شبکه شما Domain باشه امکان داشتن دو DHCP با Range یکسان وجود نداره. و اگر شما دو DHCP در حالت Workgroup با Range یکسان داشته باشید بصورت پیش فرض این احتمال است که به دو سیستم IP یکسانی داده بشود مگر اینکه Conflict Detection رو بر روی DHCP تنظیم نمایید. کلیپ های آموزشی دوره Windows 7 رو دارم تهیه میکنم که اگر مدیریت محترم سایت افتخار بدهند اینجا publish میکنم.


    irpersian و vs20 سپاسگزاری کرده‌اند.

کلمات کلیدی در جستجوها:

ip range چیست

range ip چیست

rang ip چیست

ip conflict چیست

DHCP Server چیست

clustering چیست

ip addres range

range ip چيست

failover clustering چیست؟

dhcp cluster

dhcp

ip conflict چیست؟

ip range چیست؟

clustring چیست

dhcp 8020 rule چیست

sdhcp failover چیستWindows Clusteringچیست؟کلاستر کردن dhcpip rangeچیست؟ip range چیه؟؟محدوده ip چیستip conflictچيست دو تا dhcp سرور داشته باشیمip confelict چیستچیست ؟conflict detection dhcp

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •