-
ببخشید چند تا سوال:
در قسمت BootFile حتما باید همین [B]boot\pxeboot.com[/B] رو بگذاریم؟
درقسمت Curent Direction هم مسیر ایمیج رو قرار بدیم؟
وقتی که این تنظیمات رو ok کردیم سمت کلاینت (لپ تاپ) فقط کافیه که از رو شبکه بوت بشه و سرور بهش آی پی میده و درخواست میده برای Image ؟ کار خاصی نباید رو کلاینت (لپ تاپ) انجام داد آخه بعضی سایت ها دیدم که این طوری راهنمایی کردن:
Installing Windows 7 can be done by many methods, one of these important one is "Over a Network".
Although you can use this method to do this you can also use the PE-Boot Disk to install Windows 7 over a network.
Here are the steps that you should use:
1. Copy the contents of the Windows 7 installation disc to a server location and set it up as a network share.
2. Download the following program to the server: TFTPboot.exe
Quote
([URL]http://www.megaupload.com/?d=V04T7KQ8[/URL])
3. Exact the files from the download to the C: drive.
4. From the extracted files, run TFTP32.exe.
5. Click settings and change the following: Uncheck Option negotiation, Check PXE Compatibility, Check Allow ‘\’ As virtual root. Make sure Base Directory is a single dot. Click Ok.
6. Select the DHCP tab and setup the IP pool starting address and Size of pool for your network. For Boot File, use: boot\pxeboot.com
7. On the computer that you want to install Windows 7 on, enter the Boot Selection Menu (usually by hitting F12 when starting up the machine).
8. Select Network Boot (or PXE Boot). If this option is not available, check the BIOS settings to make sure the feature is available and turned on.
9. Follow any prompts and then wait. After a while, the computer should boot to a CMD window.
10. In the CMD window, type: net use z: \\{server IP}\{share name}
11. Log in with a network username and password (Use the ‘domain\username’ format for username).
12. Type Setup and the Windows 7 installation should begin.
It all worked surprisingly well in the end. The TFTPboot setup appears to be complitcated at first glance, but it’s actually just a few settings that need changing. After you have set this up once, in the future you just turn TFTPboot back on and you are ready to install again. No more hunting for discs/
Notes:
- We can use PE-boot disk to reach the Server then use the command Setup.exe to start installation.
- The clients that you will install 7 on them using this method should have Supported NIC with PXE (where PXE is like a driver that helps the NIC to communicate with Boot Strap Protocol using ports 67 & 68 to reach the server, also TFTP port is 69)
- You need to remove memory until you have less than 4GB (on Clients) otherwise it won’t even boot (xms bug)
-
سلام مجدد :
ببخشید نفرمودین کدوم نسخه رو باید دانلود کنم؟
یه سوال کلاینت ها( لپ تاپ ها) بعد از بوت شدن رو شبکه چه طوری درخواستشونو میدن برای سرور یا همون ایمیجی که داریم؟
-
اینم یه روش دیگه:
[URL="http://www.practicalscripting.com/index.php/2011/02/image-backup-with-pxe-pxelinux-ping-partimage-and-tftpd32-on-windows/"]Image backup with PXE, pxelinux, PING, Partimage and Tftpd32 on Windows :Basic Practical Scripting @ Home and Work[/URL]
یه نرم افزارو انقدر روش مختلف ؟ یه خورده نا مفهومه که چه طوری کلاینت ها درخواستشون میدن برای ایمیج (ویندوز+نرم افزار +درایورو ..) که رو سروره؟؟؟؟؟
ممکنه از دوستان دیگه / دوست گرامی جناب حکیمی هم خواهش کنم که وارد این سناریو بشن و راهنمایی کنن;)
-
-
کسی نیست راهنمایی کنه ؟ کسی با این نرم افزارTFTPD32 کار کردن؟ تا اینجا که من متوجه شدم این یک نرم افزار واسط ارتباطیه حالا پلاینت ها چه طور درخواستشونو میدن برای ایمیج؟؟؟؟؟
-
:cigar: دوستان مدیر سایت کسی با این نرم افزار TFTPD32 کار نکرده؟؟؟؟؟؟؟
-
tftpd32 برای نصب ویندوز نیست.
-
بله برای نصب نیست فقط یک رابط توی شبکه شما کار کردی؟ تا حالا ازش برای نصب استفاده کردی ؟
-
بازم سلام:
انگار من تنهایی باید این پست رو تموم کنم و هی دارم برای خودم سوال و جواب می گذارم( بگذریم )
خیلی خیلی تشکر می کنم ازدوستان عزیزی که وقت گذاشتن و محبت کردن خصوصا مجتبی عزیز ([URL="http://forum.persiannetworks.com/members/53349.html"][B]iamexpert[/B][/URL]) و مدیران با تجربه سایت که نظر لطفشون واقعا منو شرمنده کرده ممنون;)
اینو واسه دوستان دیگه می نویسم که شاید به چنین سناریویی بخورن این لینک ها کمکتون میکنه
[URL="http://www.practicalscripting.com/index.php/2011/02/image-backup-with-pxe-pxelinux-ping-partimage-and-tftpd32-on-windows/"]Image backup with PXE, pxelinux, PING, Partimage and Tftpd32 on Windows :Basic Practical Scripting @ Home and Work[/URL]
[URL="http://www.symantec.com/support/ghosttutorial/GhostTutorials.html"]Symantec Ghost - Tutorials[/URL]
[URL="http://www.farstone.com/support/faqs/pxeserver.htm"]How to set up a free PXE Server in Windows? And, do backup and restore through PXE Server?[/URL]
[URL="http://blogs.technet.com/b/danstolts/archive/2010/03/11/deploy-windows-7-the-easy-way-using-wds-mdt-and-aik-step-by-step-video.aspx"]Deploy Windows 7 The Easy Way: Using WDS, MDT and AIK - Step-By-Step Video - ITProGuru Blog by Systems Management Expert Dan Stolts - Site Home - TechNet Blogs[/URL]
و بالاخره این روشی که میتونه به سناریو من کمک کنه :
[url]http://www.acronis.com/enterprise/products/snapdeploy/[/url]
موفق و پیروز باشید