ران نشدن RAS

[maaziyar]

با سلام
رو یک ویندوز ادونس 2000 سرور وقتی میخوام راسس رو ران کنم ارور میده
وقتی لاگ رو نگاه میکنم میگه
routing and remote access terminated by specificate-service erorr 126
اومدم با دستورsfc/command یک چک بکنم به cd گیر میداد من از این cd هایی گذاشتم که 4 تا سرور 200 روشه ممکنه به این خاطر باشه
لطفاً راهنماییم کنید

[Mehdi-H]

1. 1.Extract the Ias.mdb file and extract the Dnary.mdb file from the Windows 2000 Server CD or the Windows Server 2003 CD to the %WinDir%\System32\Ias folder on the disk. To do this, follow these steps:
   
   
   1. Click Start, click Run, type cmd in the Open box, and then click OK.
   2. At the command prompt, type the following lines. Press ENTER after each line:
      Drive:
      cd i386
      ren %windir%\system32\ias\ias.mdb %windir%\system32\ias\iasOLD.mdb
      ren %windir%\system32\ias\dnary.mdb %windir%\system32\ias\dnaryOLD.mdb
      expand ias.md_ %windir%\system32\ias\ias.mdb
      expand dnary.md_ %windir%\system32\ias\dnary.mdb
      
      Note In this step, Drive is a placeholder for the drive letter of the CD-ROM drive or of the DVD-ROM drive that contains the Windows 2000 Server or the Windows Server 2003 CD.
      
   
   
2. Register the Oledb32r.dll file and register the Oledb32.dll file. To do this, follow these steps:
   
   
   1. At the command prompt, type the following lines. Press ENTER after each line:
      Drive:
      cd program files\common files\system\ole db
      regsvr32 oledb32r.dll
      
      Note In this step, Drive is a placeholder for the drive letter where the Program Files folder is stored.
      
   2. When you receive a message that indicates that the operation is successful, click OK.
   3. At the command prompt, type the following line, and then press ENTER:
      regsvr32 oledb32.dll
      
   4. When you receive a message that indicates that the operation is successful, click OK.
   5. Type exit, and then press ENTER to quit Command Prompt.
   
   
3. Register the Vbscript.dll file. To do this, follow these steps:
   
   
   1. At the command prompt, type the following lines. Press ENTER after each line:
      Drive:
      cd %systemroot%\system32
      regsvr32 vbscript.dll
      
      Note In this step, Drive is a placeholder for the drive letter where the System32 folder is stored.
      
   2. When you receive a message that indicates that the operation is successful, click OK.
   3. Type exit, and then press ENTER to quit Command Prompt.
   
   
4. Start the Routing and Remote Access service. To do this, follow these steps:
   
   
   1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
   2. Right-click the Routing and Remote Access service, and then click Start.

[maaziyar]

دوست من در cd فقط فایلias.md_ و dnary.md_ رو داره
اونارو البته کپی کردم تو فولدر ias
بعد که میرم تو دستور
میگه این مسیر وجود نداره
توی سی دی فولدرi386 رو نگاه میکنم فقط یک برنامه exe هستش
اگر وین رو ریپیر کنم میشه