LinkBack URL
About LinkBacks
How to set the number of rings for RAS Auto-Answer in Windows Server 2003, in Windows XP Professional, in Windows Server 2000, and in Windows NT 4.0
http://support.microsoft.com/default...b;en-us;145879
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SYMPTOMS
In Microsoft Windows NT version 4.0, the Remote Access Service (RAS) answers incoming calls on the first ring. In Microsoft Windows 2000, in Microsoft Windows XP, and in Microsoft Windows Server 2003, the Routing and Remote Access Service (RRAS) answers incoming calls after the second ring. The documentation in the Remote Access Administrators Help file describes how you can modify the RAS Modem.inf file to change this behavior. However, this only works if RAS is not using any Telephony Application Programming Interface (TAPI)/Unimodem-based devices.
CAUSE
Beginning in Windows NT 4.0, RAS and RRAS are capable of using TAPI. It also maintains backwards compatibility with Windows NT 3.51. However, RAS and RRAS are not capable of using both TAPI and the Windows NT 3.51 Modem.inf information. If RAS or RRAS is using TAPI, then modifying the Modem.inf file to change the number of rings to wait before answering has no effect.
RESOLUTION
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
In Windows, to set the number of ring messages from the modem after which RAS or RRAS will answer the call, add the following key to the Registry if it does not exist:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RasMan\Parameters
Then, add the following REG_DWORD value to this key:
NumberOfRings
This REG_DWORD registry value can be in the range of 0 to 20. If a 0 value is used, the system does not watch for rings (available since Windows NT 4.0 Service Pack 5). If this value does not exist, or is outside of this range, the default value of 1 is used. If RAS is not using TAPI, this value is ignored and the documentation about modifying the Modem.inf file is correct.
For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
221308 NumberOfRings=0 does not work for RRAS auto-answer in WinNT4.0
APPLIES TO
• Microsoft Windows Server 2003, Web Edition
• Microsoft Windows Server 2003, Standard Edition
• Microsoft Windows Server 2003, Enterprise Edition
• Microsoft Windows XP Professional Edition
• Microsoft Windows 2000 Server
• Microsoft Windows 2000 Advanced Server
• Microsoft Windows 2000 Professional Edition
• Microsoft Windows NT Server 4.0 Standard Edition
• Microsoft Windows NT Workstation 4.0 Developer Edition
http://support.microsoft.com/default...b;en-us;145879
