صفحه 1 از 2 1 2 آخرینآخرین
نمایش نتایج: از شماره 1 تا 15 از مجموع 22

موضوع: شیوه آی پی دهی dhcp به کلاینت ها

  
  1. #1
    نام حقيقي: Wireless

    عضو عادی
    تاریخ عضویت
    Mar 2008
    نوشته
    218
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    111

    شیوه آی پی دهی dhcp به کلاینت ها


  2. #2
    نام حقيقي: Alireza Shahrokhi Dana

    خواننده
    تاریخ عضویت
    May 2009
    محل سکونت
    Tehran
    نوشته
    308
    سپاسگزاری شده
    119
    سپاسگزاری کرده
    95
    فرض کن که ۲ تا شبکه مختلف داری و یه سرور که اونم با ۲ تا کارت شبکه مجزا به هر ۲ تا شبکه وصله
    رو سرور ۲ تا اسکوپ تعریف میکنی* که رنجش با رنج IP *های کارت شبکه سرورت یکی* باشه
    بد هر یوزر که درخواست IP میفرست بسته به اینکه کدوم کارت شبکه رو ببینه میتونه از سرور IP (و همینطور تنظیماتی که شما رو DHCP تنظیم کردی) رو بگیره



  3. #3
    نام حقيقي: x

    عضو عادی
    تاریخ عضویت
    Jun 2009
    محل سکونت
    Internet
    نوشته
    71
    سپاسگزاری شده
    49
    سپاسگزاری کرده
    18
    نقل قول نوشته اصلی توسط mansoor66 نمایش پست ها
    با سلام .
    dhcp چگونه به کلاینت ها آی پی می ده و یا کلاینت ها چگونه از dhcp آی پی دریافت می کنند ؟؟؟
    منظورتون تنظیم DHCP هست؟ یا درک موضوع!؟



  4. #4
    نام حقيقي: Wireless

    عضو عادی
    تاریخ عضویت
    Mar 2008
    نوشته
    218
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    111
    با تشکر
    دوستان من اینا رو می دونم . من می خوام این قضیه رو مو شکافی کنم واسه درک بهتر . من شیوه عملکرد dhcp را می خوام . اینکه چطوری به سیستم آی پی میده .



  5. #5
    نام حقيقي: رضا دانشمند (Dj Pashmak)

    عضو ویژه/سرپرست بخش Cisco شناسه تصویری Reza.D
    تاریخ عضویت
    Oct 2007
    محل سکونت
    .
    نوشته
    953
    سپاسگزاری شده
    887
    سپاسگزاری کرده
    870
    As soon as a DHCP Offer message is received, the client selects the offered address by replying to the server with a DHCP Request message.

    Typically, the offering server sends a DHCP Acknowledgment (DHCP ACK) message approving the lease. (DHCP options information is included in the acknowledgment.)

    Once the client receives acknowledgment, it configures its Transmission Control Protocol/Internet Protocol (TCP/IP) properties using the information in the reply and joins the network.



    ویرایش توسط Reza.D : 2009-07-03 در ساعت 12:08 AM

  6. #6
    نام حقيقي: Wireless

    عضو عادی
    تاریخ عضویت
    Mar 2008
    نوشته
    218
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    111
    تمام این صحبت ها درست . اما میشه یکم واضح تر توضیح بدید ؟؟ مثلاً این پیغام هایی که رد و بدل میشه و نهایتا منجر به اختصاص آی پی می شه حاوی چه اطلاعاتی است ؟ این مفهوم برادکست کردن توی این قضیه چی هست ؟؟؟(یه جا یه مطلبی خوندم که اینو توش نوشته بود )



  7. #7
    نام حقيقي: Wireless

    عضو عادی
    تاریخ عضویت
    Mar 2008
    نوشته
    218
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    111
    آقا من این پست قبلی را در جواب یکی از دوستان که لطف کرده بود و پاسخ داده بودند دادم . اما الان می بینم هیچ اثری ازون پست نیست !!!!!!!!!!!! تو رو خدا فکر نکنین من با خودم حرف نی میزنم ! . بابا همین الان پستشو دیدم !!!!!!!!!!!! کجا رفت یهو ؟؟



  8. #8
    نام حقيقي: محمد حکیمی

    Administrator شناسه تصویری Hakimi
    تاریخ عضویت
    Dec 2002
    محل سکونت
    تهران
    نوشته
    6,549
    سپاسگزاری شده
    6798
    سپاسگزاری کرده
    1035
    نوشته های وبلاگ
    4


    DHCP (Dynamic Host Configuration Protocol) Basics


    When a client is initialized for the first time after it is configured to receive DHCP information, it initiates a conversation with the server.

    Below is a summary table of the conversation between client and server, which is followed by a packet-level description of the process:

    Source Dest Source Dest Packet
    MAC addr MAC addr IP addr IP addr Description
    -----------------------------------------------------------------
    Client Broadcast 0.0.0.0 255.255.255.255 DHCP Discover
    DHCPsrvr Broadcast DHCPsrvr 255.255.255.255 DHCP Offer
    Client Broadcast 0.0.0.0 255.255.255.255 DHCP Request
    DHCPsrvr Broadcast DHCPsrvr 255.255.255.255 DHCP ACK



    The detailed conversation between DHCP client and DHCP server is as follows:

    DHCPDISCOVER

    The client sends a DHCPDISCOVER packet. The following is an excerpt from a network monitor capture showing the IP and DHCP portions of a DHCPDISCOVER packet. In the IP section, you can see the Destination address is 255.255.255.255 and the Source address is 0.0.0.0. The DHCP section identifies the packet as a Discover packet and identifies the client in two places using the physical address of the network card. Note the values in the CHADDR field and the DHCP: Client Identifier field are identical.
    IP: ID = 0x0; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 0 (0x0)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x39A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: Discover (xid=21274A1D)
    DHCP: Op Code (op) = 1 (0x1)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 556223005 (0x21274A1D)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP Discover
    DHCP: Client-identifier = (Type: 1) 08 00 2b 2e d8 5e
    DHCP: Host Name = JUMBO-WS
    DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
    DHCP: End of this option field



    DHCPOFFER

    The DHCP server responds by sending a DHCPOFFER packet. In the IP section of the capture excerpt below, the Source address is now the DHCP server IP address, and the Destination address is the broadcast address 255.255.255.255. The DHCP section identifies the packet as an Offer. The YIADDR field is populated with the IP address the server is offering the client. Note the CHADDR field still contains the physical address of the requesting client. Also, we see in the DHCP Option Field section the various options being sent by the server along with the IP address. In this case the server is sending the Subnet Mask, Default Gateway (Router), Lease Time, WINS server address (NetBIOS Name Service), and the NetBIOS Node Type.
    IP: ID = 0x3C30; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 15408 (0x3C30)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2FA8
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: Offer (xid=21274A1D)
    DHCP: Op Code (op) = 2 (0x2)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 556223005 (0x21274A1D)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 157.54.50.5
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP Offer
    DHCP: Subnet Mask = 255.255.240.0
    DHCP: Renewal Time Value (T1) = 8 Days, 0:00:00
    DHCP: Rebinding Time Value (T2) = 14 Days, 0:00:00
    DHCP: IP Address Lease Time = 16 Days, 0:00:00
    DHCP: Server Identifier = 157.54.48.151
    DHCP: Router = 157.54.48.1
    DHCP: NetBIOS Name Service = 157.54.16.154
    DHCP: NetBIOS Node Type = (Length: 1) 04
    DHCP: End of this option field



    DHCPREQUEST

    The client responds to the DHCPOFFER by sending a DHCPREQUEST. In the IP section of the capture below, the Source address of the client is still 0.0.0.0 and the Destination for the packet is still 255.255.255.255. The client retains 0.0.0.0 because the client hasn't received verification from the server that it's okay to start using the address offered. The Destination is still broadcast, because more than one DHCP server may have responded and may be holding a reservation for an Offer made to the client. This lets those other DHCP servers know they can release their offered addresses and return them to their available pools. The DHCP section identifies the packet as a Request and verifies the offered address using the DHCP: Requested Address field. The DHCP: Server Identifier field shows the IP address of the DHCP server offering the lease.
    IP: ID = 0x100; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 256 (0x100)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x38A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: Request (xid=21274A1D)
    DHCP: Op Code (op) = 1 (0x1)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 556223005 (0x21274A1D)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP Request
    DHCP: Client-identifier = (Type: 1) 08 00 2b 2e d8 5e
    DHCP: Requested Address = 157.54.50.5
    DHCP: Server Identifier = 157.54.48.151
    DHCP: Host Name = JUMBO-WS
    DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
    DHCP: End of this option field



    DHCPACK

    The DHCP server responds to the DHCPREQUEST with a DHCPACK, thus completing the initialization cycle. The Source address is the DHCP server IP address, and the Destination address is still 255.255.255.255. The YIADDR field contains the client's address, and the CHADDR and DHCP: Client Identifier fields are the physical address of the network card in the requesting client. The DHCP Option section identifies the packet as an ACK.
    IP: ID = 0x3D30; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 15664 (0x3D30)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2EA8
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: ACK (xid=21274A1D)
    DHCP: Op Code (op) = 2 (0x2)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 556223005 (0x21274A1D)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 157.54.50.5
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP ACK
    DHCP: Renewal Time Value (T1) = 8 Days, 0:00:00
    DHCP: Rebinding Time Value (T2) = 14 Days, 0:00:00
    DHCP: IP Address Lease Time = 16 Days, 0:00:00
    DHCP: Server Identifier = 157.54.48.151
    DHCP: Subnet Mask = 255.255.240.0
    DHCP: Router = 157.54.48.1
    DHCP: NetBIOS Name Service = 157.54.16.154
    DHCP: NetBIOS Node Type = (Length: 1) 04
    DHCP: End of this option field



    If the client has previously had a DHCP assigned IP address and it is restarted, the client will specifically request the previously leased IP address in a special DHCPREQUEST packet. The Source address is 0.0.0.0 and the Destination is the broadcast address 255.255.255.255. Microsoft clients will populate the DHCP Option Field DHCP: Requested Address with the previously assigned address. Strictly RFC compliant clients will populate the CIADDR Field with the address requested. The Microsoft DHCP server will accept either.
    IP: ID = 0x0; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 0 (0x0)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x39A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: Request (xid=2757554E)
    DHCP: Op Code (op) = 1 (0x1)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 660034894 (0x2757554E)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP Request
    DHCP: Client-identifier = (Type: 1) 08 00 2b 2e d8 5e
    DHCP: Requested Address = 157.54.50.5
    DHCP: Host Name = JUMBO-WS
    DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
    DHCP: End of this option field



    At this point, the server may or may not respond. The behavior of the Windows NT DHCP server depends on the version of the operating system being used as well as other factors such as superscoping. If the server determines that the client can still use the address, it will either remain silent or ACK the DHCPREQUEST. If the server determines that the client cannot have the address, it will send a NACK.
    IP: ID = 0x3F1A; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 16154 (0x3F1A)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2CBE
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: NACK (xid=74A005CE)
    DHCP: Op Code (op) = 2 (0x2)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 1956644302 (0x74A005CE)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP NACK
    DHCP: Server Identifier = 157.54.48.151
    DHCP: End of this option field



    The client will then begin the discover process, but the DHCPDISCOVER packet will still attempt to lease the same address. In many instances, tth client will get the same address but may not.
    IP: ID = 0x100; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
    IP: Precedence = Routine
    IP: ...0.... = Normal Delay
    IP: ....0... = Normal Throughput
    IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 256 (0x100)
    IP: Flags Summary = 0 (0x0)
    IP: .......0 = Last fragment in datagram
    IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x38A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

    DHCP: Discover (xid=3ED14752)
    DHCP: Op Code (op) = 1 (0x1)
    DHCP: Hardware Type (htype) = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops (hops) = 0 (0x0)
    DHCP: Transaction ID (xid) = 1053902674 (0x3ED14752)
    DHCP: Seconds (secs) = 0 (0x0)
    DHCP: Flags (flags) = 0 (0x0)
    DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name (sname) = <Blank>
    DHCP: Boot File Name (file) = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field (options)
    DHCP: DHCP Message Type = DHCP Discover
    DHCP: Client-identifier = (Type: 1) 08 00 2b 2e d8 5e
    DHCP: Requested Address = 157.54.51.5
    DHCP: Host Name = JUMBO-WS
    DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
    DHCP: End of this option field



    DHCP information obtained by the client from a DHCP server will have a lease time associated with it. The lease time defines how long the client can use the DHCP-assigned information. When the lease reaches certain milestones, the client will attempt to renew its DHCP information.

    Source: DHCP &#40;Dynamic Host Configuration Protocol&#41; Basics




    ARM، Reza.D و skype سپاسگزاری کرده‌اند.

  9. #9
    نام حقيقي: رضا دانشمند (Dj Pashmak)

    عضو ویژه/سرپرست بخش Cisco شناسه تصویری Reza.D
    تاریخ عضویت
    Oct 2007
    محل سکونت
    .
    نوشته
    953
    سپاسگزاری شده
    887
    سپاسگزاری کرده
    870
    The DHCP client broadcasts a DHCP Discover message to the local subnet

    ابتدا کلاینتی که میخواد از سرور IP بگیره پیامهایی رو برای شناخت DHCP Serverها ارسال میکنه

    A DHCP server can respond with a DHCP Offer message that contains an offered
    IP address for lease to the client

    در این مرحله DHCP Server با یک پیغام DHCP Offer که حاوی IP پیشنهادی به کلاینت هست جواب میده


    As soon as a DHCP Offer message is received, the client selects the offered address by replying to the server with a DHCP Request message


    بلافاصله بعد از اینکه پیغام DHCP Offer سرور توسط کلاینت دریافت شد،کلاینت IP پیشنهادی رو با فرستادن پیفام DHCP Request انتخاب میکنه.

    Typically, the offering server sends a DHCP Acknowledgment (DHCP ACK) message (approving the lease. (DHCP options information is included in the acknowledgment


    DHCP Server با فرستادن پیغام تایید IP داده شده رو تایید میکنه و کلاینت تنظیمات مربوطه رو با همین پیغام تبریک میگیره

    امیدوارم منظور رو گرفته باشین اما برای توضیح کامل و جامع میتونید به فصل 8 کتاب 291-70
    مراجعه کنید


    Hakimi، mansoor66 و skype سپاسگزاری کرده‌اند.

  10. #10
    نام حقيقي: رضا دانشمند (Dj Pashmak)

    عضو ویژه/سرپرست بخش Cisco شناسه تصویری Reza.D
    تاریخ عضویت
    Oct 2007
    محل سکونت
    .
    نوشته
    953
    سپاسگزاری شده
    887
    سپاسگزاری کرده
    870
    نقل قول نوشته اصلی توسط mansoor66 نمایش پست ها
    آقا من این پست قبلی را در جواب یکی از دوستان که لطف کرده بود و پاسخ داده بودند دادم . اما الان می بینم هیچ اثری ازون پست نیست !!!!!!!!!!!! تو رو خدا فکر نکنین من با خودم حرف نی میزنم ! . بابا همین الان پستشو دیدم !!!!!!!!!!!! کجا رفت یهو ؟؟
    اون پست رو من خواستم مرتب و تکمیل کنم حذفش کردم گویا مجددا گذاشتنش.

    توضیح جناب حکیمی و لینکی که دادن گویا ترین پاسخه.اما باز هم میتونید به کتاب 291-70 فصل 8 برای مطالعه رجوع کنید


    mansoor66 سپاسگزاری کرده است.

  11. #11
    نام حقيقي: Wireless

    عضو عادی
    تاریخ عضویت
    Mar 2008
    نوشته
    218
    سپاسگزاری شده
    28
    سپاسگزاری کرده
    111
    نمیشه خلاصه تر و گویا تر ، یک نفر این قضیه را عامیانه ، واسه من بی سواد توضیح بده ؟ !



  12. #12
    نام حقيقي: x

    عضو عادی
    تاریخ عضویت
    Jun 2009
    محل سکونت
    Internet
    نوشته
    71
    سپاسگزاری شده
    49
    سپاسگزاری کرده
    18
    نقل قول نوشته اصلی توسط mansoor66 نمایش پست ها
    نمیشه خلاصه تر و گویا تر ، یک نفر این قضیه را عامیانه ، واسه من بی سواد توضیح بده ؟ !
    ببین دوست من برادکست کردن یعنی داد زدن توی شبکه

    وقتی شما Connection تون رو فعال میکنید این اتفاق میفته:
    1.کامپیوتر شما داد میزنه که آهای......کی آی پی توزیع مکنه..
    2.اگه DHCP داشته باشین اون کامپیوتر به کامپیوتر شما میگه من دارم می خوای!!!
    3.کامپیوتر شما هم که مشتاق گرفتن هست میگه یکی به من بده!!!!
    4. DHCP Server یه آی پی به شما میده که توی شبکه بیاین!!!

    خودم هم کف کردم با این توضیح


    hoka2006، mansoor66 و Hanif سپاسگزاری کرده‌اند.

  13. #13
    نام حقيقي: KurD BoY

    عضو غیر فعال شناسه تصویری Ronin
    تاریخ عضویت
    Mar 2009
    محل سکونت
    آذر بایجان غربی-پیرانشهر
    نوشته
    112
    سپاسگزاری شده
    10
    سپاسگزاری کرده
    5
    توی DHCP وقتی یه کلاینت IP گرفت اگه بر فرض خاموش بشه و 3 روز دیگه بیاد دوباره همون IP و میگیره
    این با تئوریش درست در نمیاد که هر دفعه وصل شد یه IP بگیره
    وقتی هم سرور IP میده از آخرین IP تو رنج تنظیم شده شوع می کنه میاد پایین
    این که تجربه منه حالا این همه تئوری نمی دونم چیه ؟!


    mansoor66 سپاسگزاری کرده است.

  14. #14
    نام حقيقي: x

    عضو عادی
    تاریخ عضویت
    Jun 2009
    محل سکونت
    Internet
    نوشته
    71
    سپاسگزاری شده
    49
    سپاسگزاری کرده
    18
    نقل قول نوشته اصلی توسط Ronin نمایش پست ها
    توی DHCP وقتی یه کلاینت IP گرفت اگه بر فرض خاموش بشه و 3 روز دیگه بیاد دوباره همون IP و میگیره
    این با تئوریش درست در نمیاد که هر دفعه وصل شد یه IP بگیره
    وقتی هم سرور IP میده از آخرین IP تو رنج تنظیم شده شوع می کنه میاد پایین
    این که تجربه منه حالا این همه تئوری نمی دونم چیه ؟!
    اگه lease time بالا باشه گفته شما درسته ولی برای یه محیط مثل دانشگاه که کلاینت وایرلس و درخواست زیاد داره و lease رو هم معمولاً روی یک ساعت تنظیم میکنند این برداشت اشتباهه...صبح تا عصر آی پی ممکنه عوض بشه.
    هنگام توزیع هم از ابتدای رنج توزیع میشه...تجربه ای که من تا حالا داشتم


    mansoor66 سپاسگزاری کرده است.

  15. #15
    نام حقيقي: naderpour

    خواننده
    تاریخ عضویت
    Aug 2008
    محل سکونت
    جاده ابریشم
    نوشته
    742
    سپاسگزاری شده
    381
    سپاسگزاری کرده
    245
    نقل قول نوشته اصلی توسط Ronin نمایش پست ها
    توی DHCP وقتی یه کلاینت IP گرفت اگه بر فرض خاموش بشه و 3 روز دیگه بیاد دوباره همون IP و میگیره
    این با تئوریش درست در نمیاد که هر دفعه وصل شد یه IP بگیره
    وقتی هم سرور IP میده از آخرین IP تو رنج تنظیم شده شوع می کنه میاد پایین
    این که تجربه منه حالا این همه تئوری نمی دونم چیه ؟!
    هر IP یک مقدار Lease Time داره که بعد از گذشت این زمان سیستم دوباره برای گرفتن IP جدید به Dhcp server درخواست می ده ، اگر بعد از گذشتن این زمان سرور درخواستی از سمت Client دریافت نکنه امکان داره ip رو به یک سیستم دیگه اختصاص بده.در ضمن این امکان هم وجود داره که در درخواست مجدد ، سرور IP قبلی رو به Client اختصاص نده .

    نحوه اختصاص ip هم بستگی به سرور داره .


    SADEGH65، mansoor66 و skype سپاسگزاری کرده‌اند.

صفحه 1 از 2 1 2 آخرینآخرین

کلمات کلیدی در جستجوها:

lease time چیست

DHCP چیست؟

توضیح کامل dhcp

DHCPچیست

lease duration چیست

ای پی دهی

http://forum.persiannetworks.com/f78/t25677.html

آموزش dhcp

آموزش تصویری ویندوز سرور 2008 تنظیم کلاینتdhcp

dhcp کلاینت چیست

dhcp

سرایند dhcp را کامل توضیح

تنظیم dhcp client

تنظیم در کلاینت

dhcp چیست

dhcpچیست؟

تنظیمات کلاینتها در dhcp

http://forum.persiannetworks.com/f78/t25677-2.html

نحوه آدرس دهیdhcp

توضیحی کامل از dhcp

source address

DHCP Client Table

DHCP Lease Timeکد 0x100 چیستتوضیحات کامل در مورد dhcp

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •