با سلام
یه سوالی دارم من یه cisco AP 1600 دارم که می خوام توسط یه سوئیچ 2960 به کنترلر 3850 متصلش کنم اگه همه پورت ها داخل یه vlan باشند بدون مشکل به کنترلر join میشه ولی در صورتی که بخوام اتصال دو سوئیچ توسط لینک ترانک انجام بگیره join انجام نمیشه یه جا خوندم اگه ترانک 1q. باشه و پورت 2960 که Ap بهش متصل هست native vlan باشه مشکل برطرف میشه ولی باز جواب نداد لاگی که روی کنترلز انداخته اینه(لینک ترانک به پورت 23 کنترلر متصل هست)

کد:
*Jun 16 09:40:05.978: %CAPWAP-3-AP_PORT_CFG: AP connected port Gi1/0/23 is not an access port.
*Jun 16 09:40:05.979: *%LOG-3-Q_IND: 1 wcm:  Validation of SPAM Vendor Specific Payload failed - AP  c0:25:5c:96:90:e0
*Jun 16 09:40:05.979: *%CAPWAP-3-DATA_TUNNEL_CREATE_ERR2: 1 wcm:  Failed to create CAPWAP data tunnel with interface id: 0xf3898000000034 for AP: c025.5c96.90e0 Error Reason: Capwap Data Tunnel create retry exceeded max retry count.
*Jun 16 09:40:33.098: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination
*Jun 16 09:40:52.098: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination[...It occurred 4 times/sec!.]
*Jun 16 09:41:11.098: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination[...It occurred 2 times/sec!.]
*Jun 16 09:41:30.098: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination[...It occurred 4 times/sec!.]
*Jun 16 09:41:35.038: *%LOG-3-Q_IND: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination
*Jun 16 09:41:35.038: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event () and state (CAPWAP Join Response) combination
*Jun 16 09:41:49.098: *%CAPWAP-3-INVALID_STATE_EVENT: 1 wcm:  Invalid AP event (CAPWAP Discovery Request) and state (CAPWAP Join Response) combination



موضوعات مشابه: