سلام من یک انتن TP link TL-WA5210G دارم و میخوام با استفاده از گزینه radius اون رو به nps ویندوز (radius) متصل و clientها با استفاده از نام کاربری اکتیوشون به شبکه متصل بشند،
Enable Windows Server 2008 Network Policy Server (NPS)
- Add the "Network Policy and Access Services" role to your domain controller.
- Enable these role services during installation:
Network Policy Server
Routing & Remote Access Services
Remote Access Service
Routing
Verify the RADIUS Port Numbers
- Server Manager -> Roles -> Network Policy and Access -> Right-click NPS (Local) -> Properties -> Ports Tab.
- Verify the defaults for Authentication are 1812,1645.
- Verify the defaults for Accounting are 1813, 1646.
- The 18 set is for a secure connection, or vice-versa. You can change things to match your RADIUS client, but the defaults should be fine.
Add a new RADIUS Client
- NPS (Local) -> RADIUS Clients and Servers -> RADIUS Clients -> Right-click Add new Client.
- Add a name, the ip address of your client and create a shared secret.
Add a new Network Policy
- NPS (Local) -> Policies -> Right-click Network Policies -> Add new.
- Enter a name and leave Type of network access server as Unspecified. Click Next.
- Add a condition. Choose Windows Groups. Add a Group ("Domain Users" for example). Click OK, then Next.
- Choose Access Granted. Click Next.
- Leave the default Authentication Methods. Click Next.
- Leave the Default Constraints. (Although they look like some cool new features you may want to use.) Click Next.
- Leave the Default Settings. Click Next.
- Click Finish.
وقتی کاربری تلاش میکنه متصل بشه نام کاربری میپرسه و این رون تکرار میشه و در سرور پیغام خطای زیر میده
Event ID: 16
A RADIUS message with the Code field set to 2, which is not valid, was received on port 1645 from RADIUS client PG-WLAN-AP-2. Valid values of the RADIUS Code field are documented in RFC 2865
این سوال اینجا پرسیدم چون فکر میکنم مشکل tp link و باید استانداردش رو پیدا کنم که در سرورم بگم از اون استاندارد استفاده کنه (radius client Vendor)
موضوعات مشابه: