صفحه 1 از 2 1 2 آخرینآخرین
نمایش نتایج: از شماره 1 تا 15 از مجموع 23

موضوع: مشکل با Router N Wireless Tplink 841ND

  
  1. #1
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102

    مشکل با Router N Wireless Tplink 841ND

    دوستان من یک روتر وایرلس Tplink 841ND دارم.

    متاسفانه وایرلس کنسول پلی استیشن 3 با این مدل سازگاری نداره.

    (یا من بلد نیستم درست کانفیگ کنم)

    به نت وصل میشه تو Brows پلی استیشن هم سرچ میکنم سرعت نت هم تو شبکه عالی هستش ولی وارد نتورک پلی استیشن نمیشه


    حالا می خوام یک کارت شبکه یو اس بی بخرم که گفتن مخصوص کنسول سونی هستش:

    این سایت رو نگاه کنید:

    http://www.tp-link.com/products/product_des.asp?id=112
    اگه اینو وصل کنم به پلی 3 دیگه مشکلی نیست؟

    یا برم یک اکسس پوینت دی لینک 2100 بخرم؟


    اگه دی لینک 2100 بخرم فکر کنم دیگه روتر Tplink بی مصرف میشه درسته؟

    یکی از دوستان لطفآ راهنمایی کنه.


    اگه میشه یه توضیحی به UPnP و DMZ تو تنظیمات روتر چی هستن باید روشن باشن یا خاموش؟

    (از شرکتی که اینترنت می گیرم یک نفر واسه کانفیگ روتر اومدش فکر کنم چیزی حالیش نبود 10

    تومان هم واسه تنظیم کانفیگ گرفت. فقط PPPoe درست کرد سیکوریتی رو فعال کرد)






    موضوعات مشابه:
    arash3400 سپاسگزاری کرده است.





  2. #2
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272

    Internet Connection Settings (wireless connection)

    This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.


    Set the method for connecting the system to the Internet. Internet connection settings vary depending on the network environment and the devices in use. The following procedure describes a typical setup when connecting to the Internet wirelessly.
    1.
    Check that the settings for the access point have been completed.
    Check that there is an access point connected to a network with Internet service near the system. Settings for the access point are typically set using a PC. For details, contact the person who set up or maintains the access point.
    2.
    Confirm that an Ethernet cable is not connected to the PS3™ system.
    3.
    Select (Network Settings) under (Settings) in the home menu.
    4.
    Select [Internet Connection Settings].
    Select [Yes] when a confirmation screen is displayed stating that you will be disconnected from the Internet.

    5.
    Select [Easy].

    6.
    Select [Wireless].

    7.
    Select [Scan].
    A list of access points within the range of the PS3™ system is displayed.

    Depending on the model of PS3™ system in use, you may have the option [Automatic]. Select [Automatic] when using an access point that supports automatic setup. If you follow the on-screen instructions, the necessary settings will be completed automatically. For information on access points that support automatic setup, contact your local retailer.

    8.
    Select the access point that you want to use.
    An "SSID" is an identification name assigned to an access point. If you do not know which SSID you should use or if an SSID is not displayed, contact the person who set up or maintains the access point for assistance.


    9.
    Check the SSID for the access point.
    10.
    Select the security settings that you want to use.
    The types of security settings vary depending on the access point. Contact the person who set up or maintains the access point for information on which setting to select.


    11.
    Enter the encryption key.
    The encryption key is displayed as a series of [*]. If you do not know the encryption key, contact the person who set up or maintains the access point for assistance.


    When you have finished entering the encryption key and have confirmed the network configuration, a list of settings will be displayed.

    Depending on the network environment, additional settings for PPPoE, proxy server or IP address may be required. For details on these settings, refer to the information from your Internet service provider or the instructions supplied with the network device.

    12.
    Save your settings.
    13.
    Test the connection.
    If you select [Test Connection], the system will attempt to connect to the Internet.

    14.
    Confirm the connection test results.
    If a successful connection has been made, information on the network will be displayed.


    Hints


    • If the connection fails, follow the on-screen instructions to check your settings. Also refer to the information from your Internet service provider and the instructions supplied with the network device in use.
    • If you test the connection immediately after selecting [Automatic] > [AOSS™] in step 7, the router settings may not be completed and the connection may fail. Wait approximately 1 or 2 minutes before testing the connection.


    ------------------------------------------------------------------------------------------------------------------------------------

    Internet Connection Settings (advanced settings)

    If you are unable to connect to the Internet with basic settings, change your settings as necessary. Adjust each item as necessary for your particular network environment.
    1.
    Select (Network Settings) under (Settings) in the home menu.
    2.
    Select [Internet Connection Settings].
    Select [Yes] when a confirmation screen is displayed stating that you will be disconnected from the Internet.
    3.
    Select [Custom].
    Adjust each item as necessary for the network environment in use. The items displayed vary depending on the settings you have selected.
    Connection Method

    Set the method for connecting to the Internet. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

    Wired Connection Make a wired connection using an Ethernet cable Wireless Make a wireless connection via a wireless LAN WLAN Settings

    Set the SSID of the access point. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

    Scan Scan for a nearby access point.

    Select this setting when you do not know the SSID of the access point. The system will detect nearby access points and display information on the SSID and security settings. Enter Manually Specify the access point by entering its SSID manually using a keyboard.

    Select this setting when you know the SSID. Automatic Use the automatic setting feature of the access point.

    This setting is available only in regions where PS3™ systems that support this feature are sold. Select this setting when using an access point that supports automatic setup. Follow the on-screen instructions. WLAN Security Setting

    Set an encryption key for an access point. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

    None Do not set an encryption key. WEP Set an encryption key.

    The encryption key can be entered on the next screen. The encryption key is displayed as a series of asterisks. WPA-PSK / WPA2-PSK Authentication Setting

    These settings are available only on PS3™ systems sold in Korea and are available only on PS3™ systems that are equipped with the wireless LAN feature.

    None Do not set authentication information. EAP-MD5 Set authentication information when using public WLAN services.

    Enter your user ID and password on the next screen. For details, refer to the information supplied by the public WLAN service provider. Ethernet Operation Mode

    Set the Ethernet data transfer rate and operation method. Usually select [Auto-Detect].

    Auto-Detect Automatically set basic settings. Manual Settings Manually adjust the Ethernet data transfer rate and operation method. IP Address Setting

    Set the method for obtaining an IP address when connecting to the Internet.

    Automatic Use the IP address allocated by the DHCP server.

    You can enter the DHCP server host name on the next screen. Manual Set the IP address manually.

    You can enter values for the IP address, subnet mask, default router and primary and secondary DNS on the next screen. PPPoE Connect to the Internet using PPPoE.

    You can enter your user ID and password on the next screen. DHCP

    Set the DHCP host name. Usually select [Do Not Set].

    Do Not Set Do not set the DHCP host name. Set Set the DHCP host name. DNS Setting

    Set the DNS server.

    Automatic Automatically acquire the DNS server address. Manual Manually enter the DNS server address. MTU

    Configure the MTU value used when transmitting data. Usually select [Automatic].

    Automatic Automatically set the MTU value. Manual Specify the maximum size of data packets (in bytes) that can be sent in one transmission. Proxy Server

    Set the proxy server to be used.

    Do Not Use Do not use a proxy server. Use Use a proxy server.

    You can enter the proxy server address and port number on the next screen. UPnP

    Set to enable or disable UPnP (Universal Plug and Play).

    Enable Enable UPnP. Disable Disable UPnP. Hint

    If set to [Disable], communication with others may be restricted when using the voice / video chat feature or communication features of games.


    --------------------------------------------------------------------------------------------------------------------------------------------------



    Settings > Network Settings > Internet Connection Test

    Internet Connection Test

    Test the Internet connection and view the results.
    Obtain IP Address Check whether an IP address has been obtained. Internet Connection Check whether a connection to the Internet has been established. PlayStation®Network* Check whether you are able to sign in to PlayStation®Network. UPnP* Check the status of UPnP (Universal Plug and Play).

    Available: You can use UPnP.

    Not Available: You cannot use UPnP.

    Disabled: UPnP has been disabled in the network settings of the PS3™ system. NAT Type* Check how the PS3™ system is connected to the Internet. This information can be used to judge the ease or difficulty of connecting to other PS3™ systems when using voice / video chat or the communication features of games.

    Type 1: Connected directly to the Internet

    Type 2: Connected to the Internet via a router

    Type 3: Connected to the Internet via a router

    With type 3, it may not be possible to communicate with other PS3™ systems, and voice / video chat and the communication features of games may be restricted. In this case, see [Connecting to PlayStation®Network] in this guide. Connection Speed (Download) Check the connection speed at which the PS3™ system downloads data from the Internet. Connection Speed (Upload) Check the connection speed at which the PS3™ system uploads data to the Internet, such as transmission of a message. * Displayed only if a PlayStation®Network account has been created.


    Hints


    • If [Failed] is displayed for [Obtain IP Address] or [Internet Connection], follow the on-screen instructions to check the network settings. You can adjust network settings under (Settings) > (Network Settings) > [Internet Connection Settings]. For details on the required settings, refer to the information from your Internet service provider or the instructions supplied with the network device.
    • You can create a PlayStation®Network account under (PlayStation®Network) > (Sign Up for PlayStation®Network).
    • If [None] is displayed for [UPnP], either the network device in use does not support UPnP or UPnP may be disabled in your network settings. For more information, refer to the instructions supplied with the network device.
    • If [Type 3] is displayed under [NAT Type], the PS3™ system or the network device may not be enabled to use UPnP. Check the [UPnP] item.
    • A router is a device that allows multiple devices to connect to a single Internet line.


    Connecting to PlayStation®Network

    When using PlayStation®Network in an office or a housing complex, security features such as a firewall may block the communications. In this case, refer to the following instructions.
    In PlayStation®Network, you can communicate with PlayStation®Network servers on the Internet or directly with other PS3™ systems. Communication with PlayStation®Network servers on the Internet is done mainly when:

    • Signing in / signing out
    • Using your Friends list or block list
    • Exchanging messages
    • Using (PlayStation®Store)

    The port numbers for PlayStation®Network servers used for this are TCP: 80, 443, 5223 and UDP: 3478, 3479.
    For voice / video chat and online game play, direct communication with other PS3™ systems is used for data transmission during voice / video chat and online gaming. The port number used for this is UDP: 3658. However, you may need to use a different port number when you are connected using a NAT route
    r.
    Hints


    • When you are using a router, direct communication with other PS3™ systems may be restricted depending on the type of router and its settings. When using a UPnP-compatible router, enable the UPnP feature.
    • Communication may be restricted by routers and security functions provided by Internet service providers. Refer to the instructions supplied with the network device and the information from your Internet service provider.

    -----------------------------------------------------------------------------------------------------------------------------------------------

    Media Server Connection

    Adjust settings for the connection to devices that support DLNA.
    Enable Enable connection to devices that support DLNA. Disable Disable connection to devices that support DLNA. About DLNA

    DLNA (Digital Living Network Alliance) is a standard that enables digital devices such as personal computers, digital video recorders, and TVs to be connected on a network and to share data that is on other connected, DLNA-compatible devices.
    DLNA-compatible devices serve two different functions. "Servers" distribute media such as image, music, or video files, and "clients" receive and play the media. Some devices perform both functions. Using a PS3™ system as a client, you can display images, or play music or video files that are stored on a device with DLNA Media Server functionality over a network.


    Connecting the PS3™ system and DLNA Media Server

    Connect the PS3™ system and DLNA Media Server using a wired or wireless connection.

    Example when connecting to a personal computer using a wired connection



    Example when connecting to a personal computer using a wireless connection



    Setting up a DLNA Media Server

    Set up the DLNA Media Server so that it can be used by the PS3™ system. The following devices can be used as DLNA Media Servers.

    • Devices that support the DLNA standard, including products of companies other than Sony
    • Microsoft® Windows® XP or Microsoft® Windows Vista™ personal computers with Windows Media® Player 11 installed


    When using an AV device as a DLNA Media Server

    Enable the DLNA Media Server function of the connected device to make its content available for shared access. The setup method varies depending on the connected device. For details, refer to the instructions supplied with the device.

    When using a Microsoft® Windows® personal computer as a DLNA Media Server

    A Microsoft® Windows® personal computer can be used as a DLNA Media Server by using Windows Media® Player 11 functions.
    1.
    Start Windows Media® Player 11.
    2.
    Select [Media Sharing] from the [Library] menu.
    3.
    Check [Share media].
    4.
    From the list of devices under the [Share media] checkbox, select the devices that you want to share data with, and then select [Allow].
    5.
    Select [OK].
    Setup for the DLNA Media Server is completed.
    Hints


    • Windows Media® Player 11 is not installed by default on a Microsoft® Windows® personal computer. Download the installer from the Microsoft® Web site to install Windows Media® Player 11.
    • For details about how to use Windows Media® Player 11, refer to the Windows Media® Player 11 Help feature.
    • In some cases, original DLNA Media Server software may be installed on the personal computer. For details, refer to the instructions supplied with the computer.


    Playing DLNA Media Server content

    When you turn on the PS3™ system, DLNA Media Servers on the same network are automatically detected and icons for the detected servers are displayed under (Photo), (Music), and (Video).
    1.
    Select the icon of the DLNA Media Server that you want to connect to under (Photo), (Music), or (Video) in the home menu. All available folders and files that can be played by the PS3™ system will be displayed.

    2.
    Select the file that you want to play.
    Hints


    • The PS3™ system must be connected to a network. For details on network settings, see (Settings) > (Network Settings) > [Internet Connection Settings] in this guide.
    • When the method of allocating IP addresses has been changed from AutoIP to DHCP under the settings for the network environment, perform another search for servers under (Search for Media Servers).
    • The DLNA Media Server icon is only displayed when [Media Server Connection] is enabled under (Settings) > (Network Settings).
    • The folder names that are displayed vary depending on the DLNA Media Server.
    • Depending on the DLNA Media Server, some files may not be playable or operations that can be performed during playback may be restricted.
    • You cannot play copyright-protected content.
    • File names for data that is stored on servers that are not compliant with DLNA may have an asterisk appended to the file name. In some cases, these files cannot be played on the PS3™ system. Also, even if the files can be played on the PS3™ system, it might not be possible to play the files on other devices.


    Searching for DLNA Media Servers manually

    You can initiate a search for DLNA Media Servers on the same network. Use this feature if no DLNA Media Server is detected when the PS3™ system is turned on.

    Select (Search for Media Servers) under (Photo), (Music) or (Video). When the search results are displayed and you return to the home menu, a list of DLNA Media Servers that can be connected will be displayed.

    Hint

    (Search for Media Servers) is only displayed when [Media Server Connection] is enabled in (Network Settings) under (Settings).











    ویرایش توسط patris1 : 2009-09-11 در ساعت 04:21 PM
    astronix، mohsensama و arash3400 سپاسگزاری کرده‌اند.

  3. #3
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    Remote Start

    A PS3™ system that is in standby mode can be automatically turned on when a PSP™ system is used for remote play (Wake On LAN). To use this feature, you must first perform the following steps:
    To use remote play via the wireless LAN feature of the PS3™ system or via an access point:


    • Update the PSP™ system software to version 3.72 or later.
    • Set to log in automatically under (Users) on the PS3™ system.


    To use remote play via the Internet:


    • Update the PSP™ system and the PS3™ system to the latest version of the system software.
    • Set to log in automatically under (Users) on the PS3™ system.
    • Complete the network settings on the PS3™ system so that it can connect to the Internet.
    • Create a PlayStation®Network account.
    • Set to sign in automatically to PlayStation®Network.


    Hints


    • For details on logging in automatically under (Users), see (Users) > [Logging in] > [Setting automatic login] in this guide.
    • For details on signing in automatically to PlayStation®Network, see (PlayStation®Network) > [Save Password (Auto Sign-In)] in this guide.


    Enabling remote start

    1.
    Select (Remote Play Settings) from (Settings) in the home menu.
    2.
    Select [Remote Start] > [On].
    3.
    Select [OK] on the screen that is displayed. To use remote play via the Internet, select [Enable Remote Start via the Internet].
    4.
    Turn off the PS3™ system.
    Select (Turn Off System) from (Users) in the home menu to turn off the system and to put it into standby mode. Do not turn off the system using the main power switch on the system rear.
    5.
    Perform remote play using the PSP™ system.
    For details on remote play, see (Network) > (Remote Play) > [Using remote play] in this guide.
    Hint

    If remote start is enabled, the internal fan of the PS3™ system will continue to operate even after the system is turned off.

    Disabling remote start

    1.
    Select (Remote Play Settings) from (Settings) in the home menu.
    2.
    Select [Remote Start] > [Off].
    Remote start via the Internet

    You may not be able to use remote play via the Internet depending on the network device in use. If this happens, check the following information:
    Notice

    Depending on the type of router, the PS3™ system may be started unintentionally if remote start is enabled. If a remote play connection is not established within a certain amount of time after the PS3™ system is started, the system will turn off automatically. To prevent this from happening, remote start via the Internet may be disabled automatically.


    • A router is required to use remote start via the Internet.
    • If the router supports UPnP, enable the router's UPnP function.
    • If the router does not support UPnP, you must set the router's port forwarding feature to allow communication with the PS3™ system from the Internet. The port number that is used for remote play and remote start is TCP: 9293 or UDP: 9293. For information about setting this option, refer to the instructions supplied with the router.
    • Port forwarding is a function for forwarding signals that arrive at a specific port (entrance) to another specified port (exit). This is also referred to as "port mapping" or "address conversion."
    • If the router's IP address (global IP address) is changed when the PS3™ system is in standby mode, remote start will not be successful.




    ویرایش توسط patris1 : 2009-09-11 در ساعت 04:11 PM
    astronix، nima_ir و arash3400 سپاسگزاری کرده‌اند.

  4. #4
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    دوست عزیز با تشکر از لطف شما

    من با تنظیمات پلی 3 مشکلی ندارم(البته به نظر خودم)

    به این تصویر نگاه کنید :

    Welcome to Tinypic, a free image upload solution. Simply browse, select, and upload!


    نت بهش وصل میشه ولی به نتورک پلی 3 وصل نمیشه.

    دوست عزیز وقتی که کابلی که از رادیو وایرلس اومده مستقیم وصل می کنم به پلی 3 و در تنظیمات PPPOE انتخاب می کنم. یوزر و پسورد که می زنم خیلی زود وصل میشه و هیچ مشکلی هم ندارم.

    ولی وقتی که به روتر وصلش می کنم. اینطور میشه..

    با کابل هم امتحان کردم یک لن از روتر زدم به پلی 3 بازم همین مشکل رو داشتم به اینترنت وصل میشه ولی وارد نتورک پلی 3 نمیشه.

    فکر کنم باید دستی به روتر تعریف کنم ؟ آره؟



    arash3400 سپاسگزاری کرده است.

  5. #5
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    The port numbers for PlayStation®Network servers used for this are TCP: 80, 443, 5223 and UDP: 3478, 3479.
    For voice / video chat and online game play, direct communication with other PS3™ systems is used for data transmission during voice / video chat and online gaming. The port number used for this is UDP: 3658. However, you may need to use a different port number when you are connected using a NAT router.
    Hints


    • When you are using a router, direct communication with other PS3™ systems may be restricted depending on the type of router and its settings. When using a UPnP-compatible router, enable the UPnP feature.
    • Communication may be restricted by routers and security functions provided by Internet service providers. Refer to the instructions supplied with the network device and the information from your Internet service provider

    -------------------------------------------------------------------------------------------------------------------------------------------------


    • A router is required to use remote start via the Internet.
    • If the router supports UPnP, enable the router's UPnP function.
    • If the router does not support UPnP, you must set the router's port forwarding feature to allow communication with the PS3™ system from the Internet. The port number that is used for remote play and remote start is TCP: 9293 or UDP: 9293. For information about setting this option, refer to the instructions supplied with the router.
    • Port forwarding is a function for forwarding signals that arrive at a specific port (entrance) to another specified port (exit). This is also referred to as "port mapping" or "address conversion."
    • If the router's IP address (global IP address) is changed when the PS3™ system is in standby mode, remote start will not be successful



    صفحه 42 راهنمای Router را نگاه کن و تنظیمات را انجام بده http://www.tp-link.com/english/soft/200865140710.pdf



    ویرایش توسط patris1 : 2009-09-11 در ساعت 11:39 PM
    nima_ir و arash3400 سپاسگزاری کرده‌اند.

  6. #6
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    سلام دوست عزیز مرسی بابت راهنماییت خیلی اقایی. از اینکه زود جواب میدی ممنون هستم

    دوست عزیز من زبانم زیاد خوب نیست. دست پا شکسته یه چیزی حالیم میشه.

    چند تا عکس از قسمت تنظیمات روتر گرفتم طبق چیزی که شما گفتید صفحه 42 راهنمای روتر که قسمت

    Address Reservation
    وارد شدم وچندتا عکس گرفتم .

    اگه عکس ها رو نگاه کنی و توضیح بدی روی عکس ها ممنون میشم.


    Welcome to Tinypic, a free image upload solution. Simply browse, select, and upload!

    دوست عزیز در نوشته های بالا چند پورت برای TCP , UDP نوشته شده کدامم رو باید بزنم.؟؟؟ اگه بتونی خلاصه ی از متن بالا رو ترجمه کنی ممنون میشم.(با گوگل ترجمه کردم ولی همه چی جابجا بود)



    arash3400 سپاسگزاری کرده است.





  7. #7
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    UPNP setting
    Enable کن


    arash3400 سپاسگزاری کرده است.

  8. #8
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    شماره پورت برای پلی استیشن ® سرورهای شبکه مورد استفاده برای این هستند TCP : 80 ، 443 ، 5223 و UDP : 3478 ، 3479.
    For voice / video chat and online game play, direct communication with other PS3™ systems is used for data transmission during voice / video chat and online gaming.
    برای صوتی و تصویری چت و این بازی آنلاین ، بازی ها ، ارتباط مستقیم با سایر نظام های PS3 ™ برای انتقال داده ها در طول های صوتی استفاده می شود / ویدیو چت و بازی آنلاین.
    The port number used for this is UDP: 3658.
    شماره پورت UDP مورد استفاده برای این می باشد : 3658.
    However, you may need to use a different port number when you are connected using a NAT router.
    با این وجود ، شما ممکن است نیاز به شماره پورت های مختلف وقتی شما را به هم متصل با استفاده از یک روتر استفاده کنید.
    Hints
    نکات
    • When you are using a router, direct communication with other PS3™ systems may be restricted depending on the type of router and its settings.
      هنگامی که شما در حال استفاده از یک روتر ، ارتباط مستقیم با سایر نظام های PS3 ™ ممکن است بسته به نوع روتر و تنظیمات خود را محدود خواهد شد.
      When using a UPnP-compatible router, enable the UPnP feature.
      هنگام استفاده از UPnP - روتر سازگار ، فعال کردن قابلیت UPnP.
    • Communication may be restricted by routers and security functions provided by Internet service providers.
      ارتباطات ممکن است توسط روترها و توابع امنیتی ارائه شده توسط ارائه دهندگان خدمات اینترنت را محدود خواهد شد.
      Refer to the instructions supplied with the network device and the information from your Internet service provider
      اشاره به دستورالعمل عرضه شده را با دستگاه شبکه و اطلاعات را از ارائه دهنده سرویس اینترنت شما

    -------------------------------------------------------------------------------------------------------------------------------------------------
    -------------------------------------------------- -------------------------------------------------- ---------------------------------------------


    • A router is required to use remote start via the Internet.
      روتر لازم است شروع به استفاده از راه دور از طریق اینترنت می باشد.
    • If the router supports UPnP, enable the router's UPnP function.
      اگر روتر را پشتیبانی UPnP ، قادر می سازد تابع روتر UPnP.
    • If the router does not support UPnP, you must set the router's port forwarding feature to allow communication with the PS3™ system from the Internet.
      اگر روتر نشانی از UPnP پشتیبانی نمی کند ، شما باید روتر قابلیت حمل و نقل بندر به اجازه برقراری ارتباط با سیستم ™ PS3 از اینترنت مجموعه.
      The port number that is used for remote play and remote start is TCP: 9293 or UDP: 9293.
      شماره پورت است که برای شروع بازی از راه دور و از راه دور استفاده می شود TCP می باشد : 9293 یا UDP : 9293.
      For information about setting this option, refer to the instructions supplied with the router.
      برای کسب اطلاعات در مورد تنظیم این گزینه ، مراجعه به دستورالعمل های عرضه شده با روتر.
    • Port forwarding is a function for forwarding signals that arrive at a specific port (entrance) to another specified port (exit).
      حمل و نقل بندر تابع برای فرستادن سیگنال های که می رسند در یک پورت خاص (ورودی) به یک بندر مشخص شده (خروج) می باشد.
      This is also referred to as "port mapping" or "address conversion."
      این نیز به عنوان "نقشه برداری بندر" و یا "تبدیل آدرس ارجاع داده است."
    • If the router's IP address (global IP address) is changed when the PS3™ system is in standby mode, remote start will not be successful
      اگر آدرس آی روتر (جهانی نشانی پروتکل اینترنت) می باشد که تغییر سیستم PS3 ™ می باشد در حالت آماده به کار ، شروع به راه دور نمی خواهد موفق



    arash3400 سپاسگزاری کرده است.

  9. #9
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    دوست عزیز من هم متن رو که دادن به گوگل همین طور ترجمه ش کرد.

    عکسای که گرفتم. اگه روی عکسا توضیح بدی ممنون میشم.

    UPNP هم هستش Enable



    arash3400 سپاسگزاری کرده است.

  10. #10
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    مثال
    IP PS3 192.168.0.23
    Subnet 255.255.255.0
    IP Router 192.168.0.1
    Primary DNS 66.75.164.90
    Secondary DNS 66.75.164.89













    و استفاده از Port Forwarding Router








    DMZ Info


    UPnP Info


    MTU (Should it be Auto or Manual? If Manual what size?)


    SSID Broadcast (Should it be Enabled or Disabled?)


    Firewall Info (Should Block Anonymous Internet Requests be unchecked or checked?)



    این سایت هم مال PSP3 بارهاست
    PlayStation®3 Forum Information Center - PlayStation®3 General - PlayStation.com Forums
















    ویرایش توسط patris1 : 2009-09-12 در ساعت 07:02 PM
    SADEGH65، nima_ir و arash3400 سپاسگزاری کرده‌اند.

  11. #11
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    دوست عزیز یک دنیا ممنون که محبت داری .

    من طبق راهنمایی های که شما کردید مراحل رو انجام دادم . در اخر هم به در بسته خوردم.






















    دوست عزیز شما خودتون پلی 3 دارید؟

    دوست عزیز وقتی من کابل رو مستقیم به پلی می زنم و از ستینگ دستگاه PPPOE
    را انتخاب می کنم. خیلی زود وصل میشه.

    نمیشه روتر و یه جوری تنظیم کنم که اینجوری بشه.؟؟؟

    الان تا کامپیوتر رو روشن می کنم به نت وصل هستش. چه جوری میشه به حالت PPPOE وصل بشه؟ و همه به روتر وصل باشه؟ امکانش هست؟



    دوست عزیز من شرمنده م خیلی خسته ات کردم با زحماتی که بهت میدم. اگه دیدم جواب نمیده میرم یک روتر لینک سیس WRT54GS میگرم. می گن مخصوص گیم هستش.




    arash3400 سپاسگزاری کرده است.

  12. #12
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    توی کامپیوترت ipconfig /all را اجرا کن و اینجا بنویس یا عکس بزار

    پورتهای زیر را که هنوز باز نکردی که

    UDP 88
    UDP 3074
    UDP 5223
    TCP 3074


    ویرایش توسط patris1 : 2009-09-13 در ساعت 02:22 AM
    arash3400 سپاسگزاری کرده است.





  13. #13
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    سلام دوست عزیز

    خدمت شما.

    پورت هایی که فرمودید هم اضافه کردم .

    فقط پورت 80 باید برم ریموت منیجر رو به 8080 تغییر بدم که فعال بشه.(درسته)؟؟










    arash3400 سپاسگزاری کرده است.

  14. #14
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    روی PS3 هم DNS و Gateway را مثل کامپیوتر تمظیم کردی؟


    nima_ir و arash3400 سپاسگزاری کرده‌اند.

  15. #15
    نام حقيقي: سامان

    خواننده
    تاریخ عضویت
    Sep 2009
    محل سکونت
    اهواز
    نوشته
    53
    سپاسگزاری شده
    22
    سپاسگزاری کرده
    102
    سلام:

    بله دوست این فیلم رو نگاه کنید. حجمش 10 مگ هستش.

    مشکل کجاست.


    zSHARE - Video013.rar

    راستی شما خودتون روتر وایرلس دارید؟

    مدلش؟




    arash3400 سپاسگزاری کرده است.

صفحه 1 از 2 1 2 آخرینآخرین

کلمات کلیدی در جستجوها:

forum.persiannetworks.com t27138-2

1

مشکل dns با tp link

tp-link

چگونه sign-in شویم در psp playstation network

primary dns sony ps35playstation 3 connectionstp-link 841NDتنظيمات روتر wolExplain Wireless Routerport forward 80 به8080tp link 841ndip address چیستMTU SettingsYour client device failed to connect to the networkفعال کردن UPnPشماره سریال دستگاه TP-LINKکجاستsony voice recorders دستورالعمل کار باتغییر نام wlan tp linktp-link errcode 25002error code: 25002 the port of the virtual server is conflicting with that of the remote web management.چگونه با ps3 wifi وصل شویمTP LINK Proxy Servervpn در tplink

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •