Load Balancing Script

[CODE]
# nano /usr/local/bin/bl

#!/bin/bash
###
##
#

# Set devices:
DEV1=${1-eth0}
DEV2=${2-eth1}

# Get IP addresses of our devices:
ip1=`ifconfig $DEV1 | grep inet | awk '{ print $2 }' | awk -F: '{ print $2 }'`
ip2=`ifconfig $DEV2 | grep inet | awk '{ print $2 }' | awk -F: '{ print $2 }'`

# Get default gateway for our devices:
gw1=`route -n | grep $DEV1 | grep '^0.0.0.0' | awk '{ print $2 }'`
gw2=`route -n | grep $DEV2 | grep '^0.0.0.0' | awk '{ print $2 }'`

echo "$DEV1: IP=$ip1 GW=$gw1"
echo "$DEV2: IP=$ip2 GW=$gw2"

### Definition of routes ###

# Check if tables exists, if not -> create them:
if [ -z "`cat /etc/iproute2/rt_tables | grep '^251'`" ] ; then
echo "251 rt_dev1" >> /etc/iproute2/rt_tables
fi
if [ -z "`cat /etc/iproute2/rt_tables | grep '^252'`" ] ; then
echo "252 rt_dev2" >> /etc/iproute2/rt_tables
fi

# Define routing tables:
ip route add default via $gw1 table rt_dev1
ip route add default via $gw2 table rt_dev2

# Create rules:
ip rule add from $ip1 table rt_dev1
ip rule add from $ip2 table rt_dev2

# If we already have a 'nexthop' route, delete it:
if [ ! -z "`ip route show table main | grep 'nexthop'`" ] ; then
ip route del default scope global
fi

# Balance links based on routes:
ip route add default scope global nexthop via $gw1 dev $DEV1 weight 1 nexthop via $gw2 dev $DEV2 weight 1

# Flush cache table:
ip route flush cache

# All done
echo "OK"

# chmod 777 /usr/local/bin/bl
# /usr/local/bin/bl
or
# /usr/local/bin/bl <eth0> <eth1>
[/CODE]

میشه توضیح بدید دقیقا چیکار میکنه این اسکریپت؟چون من لود بالانسینگ کردم از کل پهنای باندم نمی تونم استفاده کنم مگه اینکه 2 تا لینک دانلود بزارم