mrtg

[ahuray_mazdaa]

man ino mizaram to file config
# This section creates CPU Load monitoring
### CPU Load Average ###
Target[192.168.0.1]: .1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1. 5.2ublic@192.168.0.1
MaxBytes[192.168.0.1]: 100
Unscaled[192.168.0.1]: dwmy
Options[192.168.0.1]: gauge, absolute, growright, noinfo, nopercent
YLegend[192.168.0.1]: CPU Load(%)
ShortLegend[192.168.0.1]: (%)
LegendI[192.168.0.1]: 1min ave
LegendO[192.168.0.1]: 5min ave
Legend1[192.168.0.1]: 1min ave(%)
Legend2[192.168.0.1]: 5min ave(%)
Title[192.168.0.1]: CPU Load ($HOST)
PageTop[cpu_hostname]: <H1>CPU Load Average</H1>


in error mideh


linux1:~# mrtg
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.4.1.2021.10.1.5.1)
SNMPv1_Session (remote host: "192.168.0.1" [192.168.0.1].161)
community: "public"
request ID: 894983156
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/share/perl5/SNMP_util.pm line 490
SNMPGET Problem for .1.3.6.1.4.1.2021.10.1.5.1 .1.3.6.1.4.1.2021.10.1.5.2 sysUptime sysName on public@192.168.0.1::::::v4only
at /usr/bin/mrtg line 1840
ERROR: Target[192.168.0.1][_IN_] ' $target->[2]{$mode} ' did not eval into defined data
ERROR: Target[192.168.0.1][_OUT_] ' $target->[2]{$mode} ' did not eval into defined data



che bayad kard?

---

موضوعات مشابه:

• MRTG
• مشکل در کانفیگ MRTG
• MRTG ConfigMaker & Create MRTG configuration scripts
• مشکل MRTG
• MRTG

---

[ahuray_mazdaa]

[DeathStar]

SNMP را install کن

[ahuray_mazdaa]

Snmp فعاله و کارت شبکه هاشو دارم مونیتور میکنم.....مشکلم گمونم از Mib هست...لطفا اگه کسی بلده بگه که چطور میتونم بدست بیارم Mibرو

[Sasiimax]

mv /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.old
vi /etc/snmp/snmpd.conf
rocommunity public
/etc/init.d/snmpd restart
snmpwalk -v 1 localhost -c public
اینارو که زدی بعد برو سراغ بقیه کاراش

[Sasiimax]

for interface monitoring:
cfgmaker localhost@public > /etc/mrtg/mrtg.cfg