مشکل Office در شبکه

[hraeissi]

سلام دوستان

آیا کسی می داند چه مشکلی باعث کند شدن شدید Office مخصوصاً Excell در محیط شبکه است .

زمانیکه که کابل شبکه را قطع می کنیم سرعت خوب می شود

---

موضوعات مشابه:

• دانلود برنامه office Comunication ?
• نصب office xp از طریق شبکه
• نصب office xp از طریق شبکه

---

[herus_deus]

ممكنه كه Workbook شما Share شده باشد.در اين صورت اگر سرعت لينك ارتباطي كند باشد Excell به شدت كند مي شود.
از اين مسير Tools/Share workbook چك كنيد.

[hraeissi]

ممنون
من Office 2007 دارم در اون چنین چیزی پیدا نکردم
آیا در مسیر خاصی است

[herus_deus]

متاسفانه نسخه 2007 ندارم تست كنم.
توضيحات من بيشتر با تكيه بر تجربه اي بود كه در 2003 داشتم.
مسلما در 2007 همچنين امكاني وجود دارد با كمي جستجو يافته خواهد آمد.

[hraeissi]

دوستان دیگر نظری ندارند ؟

[monaretta]

من همچین مشکلی رو داشتم.توی شبکه با Office 2003 ،آره وقتی workbook شیر شده باشه سرعت Excell رو کند میکنه.
توی 2007 ازReview تب Changes می تونین Share workbook رو چک کنید.

[hraeissi]

دوستان ممنون اما من این موارد را دیدم و share نبود ولی همچنان مشکل باقیست

دوستان دیگر نیز راه کار ارائه نمایند

[hraeissi]

دوستان عزیز

من همچنان منتظر نظرات شما هستم

[hraeissi]

دوستان چرا پاسخ نمی دهند

[nkm]

چون راهي به ذهنشان نرسيده است!

منم اين مشكل را يك مدتي داشتم
اول با از كار انداختن Auto UpDate*و دوم با راه اندازي WSUS مشكلم كمتر شد

[hraeissi]

WSUS که برای UPdate است مگه میشه به سرعت عملکرد EXcel تاثیر داشته باشد

[hraeissi]

سلام

با توجه به قدیمی بودن موضوع و رفع نشدن مشکل خواستم دوباره یادآوری کنم که شاید دوستان در این مدت هم Office 2007 را نصب کرده باشند و هم در صورت داشتن این مشکل و رفع آن ، راحه حل را برای من هم اعلام کنند

ممنون

[ARM]

دلیل دقیقش را نمیدانم ولی اگر در لیست پرینترها ، پرینتری که حذف شده است دارید ، آن را Remove کنید و فقط پرینترهای فعال را نگه دارید .

[patris1]

http://support.microsoft.com/?scid=kb%3Ben-us%3B833041&x=13&y=8

An Office program is slow or may appear to stop responding (hang) when you open a file from a network location

When you try to open a file from a network location in one of the Microsoft Office programs listed in the "Applies To" section of this article, the Office program may run very slowly or may appear to stop responding (hang).
This behavior may occur if the connection to the network location is lost during the time that your Office program is opening the file.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 (How to back up and restore the registry in Windows XP ) How to back up and restore the registry in Windows

To work around this behavior, add the EnableShellDataCaching value to the Microsoft Windows registry.

To do this, follow these steps:

1. Close your Office programs.
2. Click Start, and then click Run.
3. In the Open box, type regedit, and then click OK.
4. Locate, and then click to select the following registry key:
   
   Office 2003
   
   HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\C ommon\Open Find
   
   
   Office 2007
   
   HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\C ommon\Open Find
5. After you select the key that is specified in step 4, point to New on the Edit menu, and then click DWORD Value.
6. Type EnableShellDataCaching, and then press ENTER.
7. Right-click EnableShellDataCaching, and then click Modify.
8. In the Value data box, type 1, and then click OK.
   
   Note Any non-zero number in the Value data box will turn on caching. A zero number or blank (default) will turn off caching.
9. On the File menu, click Exit to quit Registry Editor.

This situation may occur after you click Open in the Open dialog box (on the File menu, click Open) to open a file from a network location (for example, a network server). During the process of opening the file, you lose your network connection or the network location that contains the file that you are trying to open goes down. During the process of opening the file, your Office program tries to add the file name and the path information of the file that you are trying to open to the Windows recent file list. Because the network location (path) does not now exist, the Office program may run slowly and may appear to stop responding (hang).

Note This situation may also occur if your connection to your network is slow because your Office program has to make multiple queries to the network to obtain the correct file information.


APPLIES TO

• Microsoft Office Excel 2003
• Microsoft Office PowerPoint 2003
• Microsoft Office Excel 2007
• Microsoft Office Word 2007
• Microsoft Office Publisher 2007

------------------------------------------------------------------------------------------------------------------------------

http://support.microsoft.com/?scid=kb%3Ben-us%3B280821&x=13&y=15

Word is slow to start, print, or load documents


This article was previously published under Q280821
For a Microsoft Word 97 and an earlier version version of this article, see 123210 (WD: Word Starts Slowly When Using a Network Printer Driver )
Microsoft Word starts very slowly, or other operations, such as opening or printing documents, also are very slow.
This issue may occur if one of the following conditions is true:

• Microsoft Windows is using a printer driver that is located on a network print server, instead of a local printer driver on your hard disk. When you use a remote printer driver, you may notice that it takes longer to change your default printer setting, and sometimes Word may print documents more slowly than you may expect.
• Word is installed on your computer, but Word was once running from the network. When the computer is not connected to the network, there is a long delay when you are opening documents.
• Fonts that are used in the Word document are damaged or missing from the system, and Word cannot substitute other fonts in the document.

When you start Word, it gathers information to use for document formatting and printing operations. If the files, drivers, or fonts are damaged, missing, or located on a remote server, Word can require more time to connect to the server and gather the information that it needs.
Method 1: Reinstall the printer driver by using a local port

Delete and reinstall your printer driver by using a local port. To do this, follow these steps:

1. Quit all Windows programs.
2. Click Start, point to Settings, and then click Printers.
3. Right-click your printer, and then click Delete on the shortcut menu. You receive the following message Are you sure you want to delete the printer 'printer name'?
   where 'printer name' is the name of your installed default printer.
4. Click Yes.
5. You may also receive an additional message when you delete your printer driver: Some files were used only for this printer and are no longer needed. Would you like to delete these files now?
   If you receive the message, click Yes.
6. After Windows removes your installed default printer and its associated files, reinstall the printer. To do this, use one of the following procedures, depending on the version of Windows that you are using.
   
   Microsoft Windows XP
   
   1. Click Start, click Control Panel , click Printers and Other Hardware, and then click Printers and Faxes.
   2. Double-click Add Printer to start the Add Printer Wizard, and then click Next.
   3. Click Local printer, clear the "Automatically detect and install" check box, and then click Next.
   4. Click Create a new port, and then click Local Port in the Port type section.
   5. In the Port Name box, type the path to the printer in the following format where server is the name of the print server and printer is the name of the printer:
      \\ server \ printer
   6. Click Next, and then select a Windows 2000 or Windows XP driver for your printer.
   7. Click Next, and then follow the instructions to finish the wizard.
   
   Microsoft Windows 2000
   
   1. In the Printers dialog box (click Start, point to Settings, and then click Printers), double-click Add Printer. When the Printer Wizard appears, click Next.
   2. Click to select Local Printer, and then click Next.
   3. Click Create a new port, select Local Port in the Type box, and then click Next.
   4. Type the network share name for the printer in the Port Name box. For example, type \\Server name\My printer, and then click OK.
   5. Click Next, select your printer manufacturer and model from the list, and then follow the remaining steps in the wizard to reinstall your Windows printer driver.
      Click Next, and then use the disk that was provided by your printer manufacturer, and then install it according to the installation instructions. For more information about how to install the printer driver that was provided with your printer, please contact your printer manufacturer.
   
   

For information about how to contact your printer manufacturer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:65416 (Hardware and software vendor contact information ) Hardware and software vendor contact information, A-K

60781 (Hardware and software vendor contact information ) Hardware and software vendor contact information, L-P

60782 (Hardware and software vendor contact information ) Hardware and software vendor contact information, Q-Z
For more information about troubleshooting steps that may help you solve printing problems, click the following article numbers to view the articles in the Microsoft Knowledge Base: 870968 (How to troubleshoot general printing problems in Windows Server 2003 when you use Office products ) How to troubleshoot general printing problems in Windows Server 2003 when you use Office products
870622 (How to troubleshoot problems that you may experience when you try to print to a local printer by using Office programs in Windows XP ) How to troubleshoot problems that you may experience when you try to print to a local printer by using Office programs in Windows XP
871146 (How to troubleshoot general printing problems in Windows 2000 when you are using Office products ) How to troubleshoot general printing problems in Windows 2000 when you are using Office products
826864 (How to troubleshoot damaged Word documents ) How to troubleshoot damaged Word documents
Back to the top
Method 2: Reset the Word data key in the Windows Registry

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 (How to back up and restore the registry in Windows XP ) How to back up and restore the registry in Windows

If Word is installed on your computer but the program was once running from the network and there is a long delay when you open documents when you are not connected to the network, try the following procedure.

The Word Data key stores information that is specific to the printer that is installed. To remove this printer information from Word, rename or delete the Word Data key in the Windows registry. When you restart Microsoft Word, Word recreates the Word Data key automatically.

Note After you rename or delete the Word data key, some settings in Microsoft Word are reset to their default settings.

To rename or delete the Word data key in the Windows registry, follow these steps:

1. Quit all Windows programs.
2. Click Start and then click Run.
3. In the Open box, type Regedit and then click OK.
4. Open the following registry key that is for your version of Word:
   
   Word 2003HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\W ord
   
   Word 2002 HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\W ord
   Word 2000 HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Wo rd
5. Under the Word key, click the Data subkey.
6. On the Edit menu, click Rename or Delete.
7. Click Yes if the following message appears: Are you sure you want to delete this key?
8. On the Registry menu, click Exit.
9. Start Word.

Method 3: Repair or replace damaged or missing fonts

Damaged or missing fonts can cause the problem that is described in the "Symptoms" section. To correct this problem, remove or reinstall the fonts, or do both, in your version of Microsoft Windows.

For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base: 234749 (http://support.microsoft.com/kb/234749/ ) How to restore the Windows default fonts
314960 (How to install or remove a font in Windows ) How to install or remove a font in Windows
306870 (How to Add a New Font to Your Windows Me-Based Computer ) How to add a new font to your Windows Me-based computer
131943 (TrueType Font Limits in Windows 95/98/Me ) TrueType font limits in Windows 95/98/Me


Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
APPLIES TO

• Microsoft Office Word 2003
• Microsoft Word 2002
• Microsoft Word 2000