LinkBack URL
About LinkBacks
سلام مشکلی که ما داریم اینه که یوزر ماکزیمم زمانی که روی خط می مونه 2 دقیقه است و بعد دیسکانکت میشه ، ما که کلافه شدیم و دیگه موندیم چی کار کنیم کسی چیزی به ذهنش میرسه ضمنا کارهای زیر هم انجام شده :
1- کابل ارت به روتر (سیسکو 5300 هشت ایوانه) و مودم ایوان (واف) و حتی به کابل اهتصاصی که سیم ایوان از اون اومده وصل شده
2- دمای محیط هم زیاد نیست چون کولر گازی داریم
3- CPU Process روتر هم پایینه
4-show modem summary هم نرماله و بالای 85 درصد هست
Avg Hold Incoming calls Outgoing calls Busied Failed No Succ
Time Succ Fail Avail Succ Fail Avail Out Dial Ans Pct.
00:02:39 7 0 120 0 0 0 0 0 0 100%
5- رم هم مشکلی نداره :
Using 4770 out of 124920 bytes
تنها چیز مشکوک اینه :
AS5300#show controllers e1 6
E1 6 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info of slot 0: HW: 1, PLD Rev: 11
Framer Version: 0x8
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x49,
Board Hardware Version 3.1, Item Number 800-3883-02,
Board Revision B0, Serial Number 21219172,
PLD/ISP Version 0.1, Manufacture Date 29-Jun-2000.
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line Primary.
Data in current interval (682 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 3:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 4:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 5:
4837 Line Code Violations, 8190 Path Code Violations
2 Slip Secs, 35 Fr Loss Secs, 4 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 10 Severely Err Secs, 35 Unavail Sec
Data in Interval 6:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Data in Interval 7:
13747 Line Code Violations, 7202 Path Code Violations
0 Slip Secs, 89 Fr Loss Secs, 18 Line Err Secs, 0 Degraded Mins
3 Errored Secs, 0 Bursty Err Secs, 31 Severely Err Secs, 90 Unavail Secs
Total Data (last 7 15 minute intervals):
18584 Line Code Violations, 15392 Path Code Violations,
2 Slip Secs, 124 Fr Loss Secs, 22 Line Err Secs, 0 Degraded Mins,
3 Errored Secs, 0 Bursty Err Secs, 41 Severely Err Secs, 125 Unavail Secs
ایوان ما CAS هست و تنظیمات ایوان به شرح زیره:
controller E1 0
framing NO-CRC4
clock source line primary
ds0-group 1 timeslots 1-15,17-31 type r2-digital
cas-custom 1
تنظیمات مربوط به Radius , َauthe هم به اینصورته :
aaa new-model
aaa session-mib disconnect
aaa authentication login default local group radius
aaa authentication ppp default local group radius
aaa authorization exec default local group radius
aaa accounting update periodic 1
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
aaa session-id common
این هم تنظیمات Line :
line 1 120
session-timeout 30
no flush-at-activation
absolute-timeout 480
modem Dialin
modem autoconfigure discovery
autocommand ppp
transport preferred none
transport input all
transport output none
autoselect during-login
autoselect ppp
autohangup
موضوعات مشابه:
