سلام
دوستان خسته نباشید
اگه یه سوئیچ فلشش پاک بشه باید چیکار کرد؟
یه سوئیچ 2950t دستور erase flash رو بهش دادن حالا با کنسول که بهش وصل میشیم وقتی ریست میشه اطلاعاتش اینه:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950T-24 starting...
Base ethernet MAC Address: 00:12:49:f4:9b:40
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 77
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs installed, fsid: 3
Parameter Block Filesystem (pb installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
کل دستوراتی هم که تو این مد ساپورت میکنه ایناست:
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a f
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_param -- Set system parameters in flash
trap -- Cause a software bre
trap -- Cause a software bre
-- MORE --
unset -- Unset one or more environment variables
version -- Display boot loader version
با استفاده از configuration guid از این قسمت:
Recovering from Corrupted Softwareاستفاده کردیم و این دستورو بهش دادیم که ارور مشاهده شده رو داد:
switch: copy xmodem: flash:image_filename.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCCBB0BB0xmodem:: I/O error
میشه لطفا راهنمایی بفرمایین
ممنونم
موضوعات مشابه:
- سوال در مورد کانشن wan miniport (pptp) ؟؟؟؟؟؟
- اشكال سخت افزاري سوئيچ 2950
- ios سوئیچ 2950
- مشکل در سوئیچ 2950
- سوئيچ 2950