پاک شدن فلش سوئیچ 2950!!!!!!!!!؟؟؟؟؟؟
[font=Verdana][size=2]سلام [/size][/font]
[font=Verdana][size=2]دوستان خسته نباشید[/size][/font]
[font=Verdana][size=2][/size][/font]
[font=Verdana][size=2]اگه یه سوئیچ فلشش پاک بشه باید چیکار کرد؟[/size][/font]
[font=Verdana][size=2]یه سوئیچ 2950t دستور erase flash رو بهش دادن حالا با کنسول که بهش وصل میشیم وقتی ریست میشه اطلاعاتش اینه:[/size][/font]
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950T-24 starting...
Base ethernet MAC Address: 00:12:49:f4:9b:40
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 77
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
کل دستوراتی هم که تو این مد ساپورت میکنه ایناست:
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a f
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_param -- Set system parameters in flash
trap -- Cause a software bre
trap -- Cause a software bre
-- MORE --
unset -- Unset one or more environment variables
version -- Display boot loader version
با استفاده از configuration guid از این قسمت:[b][font=Arial][size=5]
[left]Recovering from Corrupted Software
[/left]
[/b][/size][/font][font=Verdana][size=2]استفاده کردیم و این دستورو بهش دادیم که ارور مشاهده شده رو داد:[/size][/font]
switch: copy xmodem: flash:image_filename.bin
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCCBB0BB0xmodem:: I/O error
میشه لطفا راهنمایی بفرمایین
ممنونم
[font=Verdana][size=2][/size][/font]