سلام
دوستان من یه خط 64 از مخابرات دارم و اینم گزارشی هست که برا یکی از یوزرهام گرفتم لطفا یه چکی بکنید و لطف کنین روش حل مشکل ( کنترل پهنای باند ) رو برام توضیح بدین . ( اگه مشکلی داشته باشه )
ممنون
کد:
Async36 is up, line protocol is up
modem(slot/port):1/3, csm_state:CONNECTED_STATE,
bchan_num:-1 csm_status: CALL_ACTIVE
Hardware is MCOM Integrated Modem Controller
Description: connected
Interface is unnumbered. Using address of FastEthernet0/0 (80.191.207.65)
MTU 1500 bytes, BW 9 Kbit, DLY 100000 usec,
reliability 255/255, txload 239/255, rxload 4/255
Encapsulation PPP, loopback not set
DTR is pulsed for 5 seconds on reset
LCP Open
Open: IPCP
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 11:50:11
Input queue: 16/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/13/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 6 kilobits/sec
5 minute input rate 49000 bits/sec, 116 packets/sec
5 minute output rate 15000 bits/sec, 16 packets/sec
144469 packets input, 7309566 bytes, 0 no buffer
در ضمن این استانداردش چقدر می تونه باشه . مرثی
موضوعات مشابه: