فعال کردن Multilink روی AS5300
سلام.
بعد از مدتها آقا بابک حال دادن و ما هم متوجه شدیم ایشون از PN قهر نکردن. ولی چه خوب بود که سوالت رو اینجا مطرح می کردی . به هر حال من یک تنظیم می زارم البته طبق معمول رفرنس ما سایت سیسکو هستش.
اگه جایی رو مشکل داشتین من در خدمتم . هر چند که در اولین فرصت به طور کامل مطالبش رو باز می کنم.
[LEFT]
version 12.0
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service tcp-small-servers
!
hostname bobslake-nas-01
!
logging buffered 10000 debugging
aaa new-model
aaa authentication login default local
aaa authentication ppp default if-needed local
[COLOR=Blue]!--- authenticate for PPP if not authenticated during login
!--- allows users with Terminal Window after Dial to initiate PPP![/COLOR]
username admin password <deleted>
username charlie password <deleted>
spe 1/0 1/7
firmware location system:/ucode/mica_port_firmware
!
resource-pool disable
!
ip subnet-zero
no ip source-route
ip domain-name the.net
!
multilink virtual-template 1
[COLOR=Blue]!--- use virtual-template 1 for multilink connections[/COLOR]
async-bootp dns-server 172.22.53.210
isdn switch-type primary-5ess
isdn voice-call-failure 0
!
!
interface Loopback0
ip address 172.21.10.10 255.255.255.255
no ip directed-broadcast
!
interface Loopback1
ip address 172.21.104.254 255.255.255.0
[COLOR=Blue]!--- summarizes addresses in address pool
!--- Loopback 1 is in the same subnet as the address pool [/COLOR]
no ip directed-broadcast
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Virtual-Template1
description Template for Multilink Users
ip unnumbered Loopback0
no ip directed-broadcast
peer default ip address pool addr-pool
[COLOR=Blue]!--- use IP pool called addr-pool
!--- for incoming calls
[/COLOR]
ppp authentication chap
[COLOR=Blue]!--- authenticate using Challenge Handshake Authentication Protocol (CHAP)[/COLOR]
ppp multilink
!
interface FastEthernet0
ip address 172.21.101.23 255.255.255.0
no ip directed-broadcast
duplex auto
speed auto
!
interface Group-Async1
[COLOR=Blue]!--- template to control all async interface configuration [/COLOR]
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
[COLOR=Blue]!--- use PPP encapsulation dialer in-band[/COLOR]
dialer-group 5
async mode interactive
peer default ip address pool addr-pool
[COLOR=Blue]!--- use IP pool called addr-pool
!--- for incoming calls [/COLOR]
no fair-queue
no cdp enable
ppp authentication chap callin
[COLOR=Blue]!--- CHAP authenticate for dialin users only [/COLOR]
ppp multilink
group-range 1 48
[COLOR=Blue]!--- assign modems 1-48 to the Group-Async 1 configuration template[/COLOR]
router eigrp 1
network 172.21.0.0
!
ip local pool addr-pool 172.21.104.1 172.21.104.48
[COLOR=Blue]!--- define IP address pool range for dialin clients [/COLOR]
ip classless
no ip http server
!
access-list 105 permit ip any any
dialer-list 5 protocol ip list 105
!
line con 0
exec-timeout 0 0
transport input none
line 1 48
autoselect during-login
[COLOR=Blue]!--- permits user login prompts after dialin [/COLOR]
autoselect ppp
[COLOR=Blue]!--- automatically launch PPP on the line[/COLOR]
modem InOut
[COLOR=Blue]!--- modems can be used to dialin and dialout
!--- InOut may be replaced by Dialin
!--- if NAS handles only incoming calls[/COLOR]
transport preferred none
transport output telnet
line aux 0
line vty 0 4
transport preferred none
transport input telnet
transport output telnet
!
ntp clock-period 17180374
ntp update-calendar
ntp server 172.22.255.1 prefer
end
[/LEFT]