AS-5300 IOS

[NetMaster]

Salam All ;-)

This is a great version of Cisco 12.3 IOS for AS-5300 access server

It's compiled on August 17th, 2004 and i have it running on 3 AS5300 already

you can get it from here

c5300-is-mz.123-10.bin

Enjoy

لینک خراب شد. دانلود نمی شه!!!

---

موضوعات مشابه:

• کمک فوری در مورد کانفیگ 5300
• کنترل پهنای باند کاربران در 5300

---

[ali-g]

Salam All ;-)

This is a great version of Cisco 12.3 IOS for AS-5300 access server

It's compiled on August 17th, 2004 and i have it running on 3 AS5300 already

you can get it from here

ftp://ftp.neva.vlink.ru/pub/2004.Sep...-mz.123-10.bin

Enjoy

Thnx

[aryagohar]

بابا اي ول.

كلي حال كردم. هرچند كه قبلا اين خر خوبه برام پيداش كرده بود و DL رو استاد كردم.

[nikplus]

جناب NetMaster
با سلام
من اين IOS رو نصب كردم( روي AS5300 ). ولي هرچه كانفيگ مي كردم ذخيره نمي شد و در Reload دوباره پيغام كانفيگ مي اومد. دوباره برگشتم به IOS قبلي ولي باز مشكل باقي بود. حالا متوجه شدم كه bootflash موجود نيست . يعني در فرمان
Dir bootflash ، نشان ميده كه فضايي در حدود 7 مگ اشغال شده ولي در قسمت نام ؟ نشون ميده .
چه بايد كرد؟

[NetMaster]

Salam,

Please e-mail me a password (temporary) of your AS with IP address, i well login and configure it for you

please also send me the tftp address

[nikplus]

Salam,

Please e-mail me a password (temporary) of your AS with IP address, i well login and configure it for you

please also send me the tftp address

Thank you very much Mr. Khayat. But I have not any IP address yet. I work on an AS5300 in a lab environment and waiting for Mokhaberat to establish our connection. then I cant send you anything!
Of course I found something in cisco docs. It sayes to use of rommonitor and boot the system by the boot flash or bootflash filname command. do you think it solves the problem?
How can I find my last boot flash name? can I recover or reset it? Is it so important to named it something?

Regards

[NetMaster]

are you booting in romon now?

if so, you can type romon1> boot

it should boot then, try also changing the confreg to 0x2102

it maybe your config register problem. did you change your console baud rate?

please reset the following on your router romon>

confreg

answer yes to change the settings, and have your console speed at 9600

let me know...

[nikplus]

Thank you Mr. Khyat. I solved it by change my confreg to 0x2102, now I can save my config on startup, but still cant see bootflash file name.

[NetMaster]

Thank you Mr. Khyat. I solved it by change my confreg to 0x2102, now I can save my config on startup, but still cant see bootflash file name.

reach me on yahoo IM, my id is rkhayat

Waiting ;-)

[keyvan]

سلام
من زدم برای error download داد

[NetMaster]

I need you to paste here the text from your telnet/terminal so taht i know where is you error.

I also need (sh ver) or i need to know what is your Ram configuration.

Please make sure that you have at least 8 MB Flash and 32 MB D-Ram for ip IOS (as5300-i-mz)

Please make sure that you have at least 16 MB Flash and 64 MB D0Ram for ip+ IOS (as5300-is-mz)

Good Luck

[keyvan]

من هركاري كردم باز نمي شه !
از نت اسكيپ هم تست كردم - سيستم رو عوض كردم - دانلود اكسسليتور باز ميشه اما هيچي دانلود نمي شه و همون اولش ارور مي ده !

[NetMaster]

the link is down,

I well try to put another link tonight.

Please standby.

[keyvan]

Tnx

[NetMaster]

OK,

Pls check the new link in the first post

Good Luck