WAN use of E1

كسي در مورد استفاده از خط E1 به صورت point to multipoint كه مخابرات روي سيستمهاي Tellabs خودش ميده و تنظيمات روتر و module Tellabs modem و ايناش چيزي مي دونه؟

Please explain what you need, we well try to help out!

Point to multi point or point to point uses the same routing protocols as other cases, so go straight to the point

and then seek help!

Good Luck!

نمونه config رو برات مي فرستم ، اگه سئوال داشتي برام email بفرست

!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname outer1
!
enable secret 5 $1$daJ1$je8sJOlYpMZ4cX6bAmB7i/
enable password router
!
memory-size iomem 20
ip subnet-zero
ip name-server 196.225.11.3
ip name-server 196.225.21.4
ip name-server 196.225.51.3
!
!
!
controller E1 1/0
channel-group 0 timeslots 5-8
channel-group 1 timeslots 1-4
!
controller E1 1/1
!
!
!
interface Ethernet0/0
ip address 196.225.11.2 255.255.255.0
ip broadcast-address 196.225.11.0
ip mask-reply
ip directed-broadcast
no ip mroute-cache
!
interface Serial0/0
no ip address
no ip directed-broadcast
no ip mroute-cache
!
interface Serial1/0:0
description conected to router 5
ip address 196.225.10.1 255.255.255.0
ip directed-broadcast
encapsulation ppp
!
interface Serial1/0:1
description conected to router 23
ip address 196.225.12.1 255.255.255.0
ip directed-broadcast
encapsulation ppp
!
ip classless
ip route 196.225.21.0 255.255.255.0 Serial1/0:1
ip route 196.225.51.0 255.255.255.0 Serial1/0:0
ip route 196.225.81.0 255.255.255.0 Ethernet0/0
no ip http server
!
!
line con 0
transport input none
line aux 0
line vty 0 4

اگه کسی میدونه راجبه انواع ایوانی که مخابرات میده توضیح بده ممنوع میشم

به PAP ها E1 بین مراکز میده برای Data Stream