کسی با پیغام روبرو برخورد کرده؟ !!! WARNING: The switch is not usable !!!

[Mehrshad007]

سلام دوستان
1 سوئیچ 2960g-tcl دارم که پیغام روبرو رو میده !!! WARNING: The switch is not usable !!!
هیچ اینترفیسی توی runing-conf نمایش نمیده یعنی نه vlan و نه پورتهای سوئیچ . یک بار با xmodem بهش ios دادم ولی بازم درست نشد. یک بار هم فلش رو پاک کردم و دوبار ios دادم. بازم نشد.
این پیغام ها موقع بالا اومدن سوئیچ هست که میزارم . لطفا اگر کسی میتونه کمک کنه

Initializing flashfs...

flashfs[1]: 1 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 5223936
flashfs[1]: Bytes available: 27290112
flashfs[1]: flashfs fsck took 0 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

POST: PortASIC CAM Subsystem Tests : Begin

!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed


Press RETURN to get started!


00:00:19: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot
Get the number of ports in MAC notification

00:00:19: hl2mcm_core_process: hl2mcm_install_hl2mcm_ctrl_entries() failed.

00:00:19: %SYS-3-HARIKARI: Process HL2MCM top-level routine exited
00:00:19: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error:
call = ifs_read_until (header) / file = / code = 21 (Is a directory) / bytes t
ransfered = -1
-Traceback= 1695B4 165664 BDD138 BD470C
00:00:20: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEA
SE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 20:06 by nachen
00:00:20: Unable to open UDP socket on CMP_PORT

!!! WARNING: The switch is not usable !!!
Switch

---

موضوعات مشابه:

• دسترسی به IP base KVM Switch از اینترنت
• این پیغام چه معنی رو میده؟؟؟certifation warning
• رفع پیغام openfile security warning
• کنترل دسترسی به Switch ها با TACACS+
• خطای warning dns

---

[A.Yazdani]

در قسمت POST :
بعد از پیغام زیر چی دارید ؟
POST: PortASIC CAM Subsystem Tests : Begin

Passed یا Failed ?

[Mehrshad007]

در قسمت POST :
بعد از پیغام زیر چی دارید ؟
POST: PortASIC CAM Subsystem Tests : Begin

Passed یا Failed ?

سلام. فکر کنم failed بود . ولی بازم چک میکنم خبرش رو میدم

[Mehrshad007]

این ادامش هست . و failed شد.

POST: PortASIC CAM Subsystem Tests : Begin
ram_access_test Failed. ASIC: 2, offset: 16, (wr, rd) = (0xFFFFFFFF, 0xFFFFF7FF)

Extended SSRAM Test Failed
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed

POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP

driver class subsystem initialization failed

cisco WS-C2960G-24TC-L (PowerPC405) processor (revision E0) with 61440K/4088K by
tes of memory.
Processor board ID FOC1236U0ZU
Last reset from power-on
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:23:05:F1:76:80
Motherboard assembly num
Power supply part number : 341-0098-02
Motherboard serial number : FOC123606DH
Power supply serial number : AZS1228109R
Model revision number : E0
Motherboard revision number : A0
Model number : WS-C2960G-24TC-L
System serial number : FOC1236U0ZU
Top Assembly Part Number : 800-26673-03
Top Assembly Revision Number : B0
Version ID : V03
CLEI Code Number : COM3G00BRB
Hardware Board Revision Number : 0x01


!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed


Press RETURN to get started!


00:00:19: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot
Get the number of ports in MAC notification

00:00:20: hl2mcm_core_process: hl2mcm_install_hl2mcm_ctrl_entries() failed.

00:00:20: %SYS-3-HARIKARI: Process HL2MCM top-level routine exited
00:00:20: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error:
call = ifs_read_until (header) / file = / code = 21 (Is a directory) / bytes t
ransfered = -1
-Traceback= 1695B4 165664 BDD138 BD470C
00:00:21: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEA
SE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 20:06 by nachen
00:00:21: Unable to open UDP socket on CMP_PORT

[Mehrshad007]

دوستان کسی نیست راهنمایی بکنه؟؟؟

[Mehrshad007]

یعنی کسی تا حالا با این پیغام برخورد نکرده؟؟؟؟

[A.Yazdani]

دوست عزیز شما که لاگ ها رو دارید :

POST: CAM test failed 

سرچ کنید ببینید مشکل از کجاست . ممکنه مشکل حافظه داشته باشید ...