-
مشکل با FXO ها
داستان از این قرار هست که روی یک روتر 2821، با استفاده از دو ماژول FXO، تعداد 6 خط تلفن آنالوگ در اختیار کاربران شبکه قرار داده شده و بخوبی و خوشی ازش استفاده میکنند.
مشکلی که بوجود اومده اینه که بعد از پایان ارتباط به هر دلیلی، ضمن قطع ارتباط از سمت کاربر، پورت FXO همچنان مشغول باقی میمونه و پس از گذشت حتی چند روز، پورت آزاد نمیشه، مگر اینکه دستی Shutdown و no Shut بشه؛
مشکل از چی میتونه باشه ؟
[CODE][LEFT]voice-port 0/0/0
translation-profile incoming PSTN-I
supervisory disconnect dualtone pre-connect
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 3
timeouts wait-release 3
connection plar 850
description 8870XXXX
caller-id enable
!
voice-port 0/0/1
translation-profile incoming PSTN-I
supervisory disconnect dualtone pre-connect
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 3
timeouts wait-release 3
connection plar 851
description 8870XXXX
caller-id enable
!
voice-port 0/0/2
translation-profile incoming PSTN
supervisory disconnect dualtone pre-connect
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 3
timeouts wait-release 3
connection plar 852
description 8870XXXX
caller-id enable
!
voice-port 0/0/3
translation-profile incoming PSTN-I
supervisory disconnect dualtone pre-connect
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 3
timeouts wait-release 3
connection plar 853
description 8870XXXX
caller-id enable
!
voice-port 0/2/0
translation-profile incoming PSTN
supervisory disconnect dualtone pre-connect
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 3
timeouts wait-release 3
connection plar 853
description 8870XXXX
caller-id enable
!
voice-port 0/2/1
translation-profile incoming PSTN
supervisory disconnect dualtone pre-connect
no battery-reversal
input gain 4
output attenuation 5
echo-cancel coverage 24
echo-cancel mode 2
no non-linear
no vad
no comfort-noise
cptone JP
timeouts call-disconnect 5
timeouts wait-release 5
description 8870XXXX
caller-id enable[/LEFT]
[/CODE]
-
من مشکل مشابه را در سایر سامانه های تلفنی VoIP تجربه کردم که اغلب با تنظیم Disconnect Tone حل شده.
[url=http://www.cisco.com/c/en/us/support/docs/voice/analog-signaling-e-m-did-fxs-fxo/8120-fxo-disconnect.html]Understanding FXO Disconnect Problem - Cisco[/url]
فرکانس بوق قطع در مراکز مخابرات ایران 425 هرتز است که 500 میلی ثانیه پخش می شود و 500 میلی ثانیه سکوت (فرکانس ۰) است.