از این کانفیگ روتر چی میشه فهمید
سلام تو نگاه اول یه روتر این کانفیگ رو داره شما چی دستگیرتون میشه اگه سوالی بود در خدمتم. اون x و * رو خودم گذاشتم به دلایل معلوم
[QUOTE][LEFT]
User Access Verification
Password:
Router>en
Password:
Router#show run
Router#show running-config
Building configuration...
Current configuration : 1525 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 ***********************************
!
no aaa new-model
!
resource policy
!
ip subnet-zero
!
!
ip cef
!
!
ip domain name yourdomain.com
!
!
!
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 10.90.x.x 255.255.255.128 secondary
ip address 192.16.200.249 255.255.255.0 secondary
ip address 172.16.16.1 255.255.255.0 secondary
ip address x.x.x.x 255.255.255.224 ---------- ip valid internet miyad az isp
ip access-group firewall in
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.90.x.x
!
no ip http server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip access-list extended firewall
deny udp any any eq netbios-ns
deny udp any any eq 1133
deny udp any any eq 1134
deny udp any any eq netbios-dgm
permit ip any any
permit tcp any any eq 443
deny tcp any any eq 8580
deny tcp any any eq 9666
!
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 23 permit any
snmp-server community me_pbl RO
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
access-class 23 in
password **************
login
transport input telnet
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet
!
scheduler allocate 20000 1000
!
end
=============================
User Access Verification
Password:
Router>en
Password:
Router#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 10.90.x.x to network 0.0.0.0
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.16.0 is directly connected, GigabitEthernet0/0
C 192.16.200.0/24 is directly connected, GigabitEthernet0/0
x.x.x.0/27 is subnetted, 1 subnets ------ ipvalid
C x.x.x.x is directly connected, GigabitEthernet0/0 ------ ipvalid
10.0.0.0/25 is subnetted, 1 subnets
C 10.90.x.x is directly connected, GigabitEthernet0/0
S* 0.0.0.0/0 [1/0] via 10.90.x.x
Router#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 16
Route Source Networks Subnets Overhead Memory (bytes)
connected 1 3 288 544
static 1 0 72 136
internal 3 3468
Total 5 3 360 4148
Router#show ip route profile
IP routing profile not enabled
Router#show access-lists
Standard IP access list 23
10 permit 10.10.10.0, wildcard bits 0.0.0.7
20 permit any (30 matches)
Extended IP access list firewall
10 deny udp any any eq netbios-ns (21799328 matches)
20 deny udp any any eq 1133 (86 matches)
30 deny udp any any eq 1134 (156 matches)
40 deny udp any any eq netbios-dgm (4203407 matches)
50 permit ip any any (38065518 matches)
60 permit tcp any any eq 443
70 deny tcp any any eq 8580
80 deny tcp any any eq 9666
Router#show ip access-lists
=======================================================================================
[/LEFT]
[/QUOTE]
