نمایش نتایج: از شماره 1 تا 3 از مجموع 3
سپاس ها 1سپاس

موضوع: سوئیچهای سیسکو

  
  1. #1
    نام حقيقي: ali

    خواننده
    تاریخ عضویت
    May 2011
    محل سکونت
    esfahan
    نوشته
    6
    سپاسگزاری شده
    3
    سپاسگزاری کرده
    0

    سوئیچهای سیسکو

    با سلام خدمت دوستان عزیز
    vlan hoping در سوئیچهای سیسکو چیه؟
    کارش چیه؟اگه میشه واسم توضیح بدید
    با تشکر



    موضوعات مشابه:

  2. #2
    نام حقيقي: کیوان

    عضو غیر فعال شناسه تصویری key-one
    تاریخ عضویت
    Jun 2009
    محل سکونت
    کرمانشاه
    نوشته
    412
    سپاسگزاری شده
    206
    سپاسگزاری کرده
    56
    با سلام

    If a switch dynamically negotiates trunking, and the attacker pretends he is a switch and establishes a trunk to the switch, the attacker can gain access all the VLANs allowed on the trunk port, by simply using the 802.1q trunk tagging. The attacker can now "hop" onto any VLAN that is available on the trunk.

    the reason why it works when one pc is on an access port is that access port has to be on the native vlan so the frame isnt taged when it goes over a trunk link.

    the pc sends data on the native vlan but places 2 tag's on the frame befoure it is sent out. the first tag being the native vlan and the second being the vlan the attack wants to get to.

    so the switch sees the first tag and sees that it has been taged for the native vlan so the switch does what is ment to and removes the tag. but it dosnt remove the second tag. once the frame gets to the other side the switch recives the frame and reads its tag and gets placed onto the other vlan ( the vlan the attacker wants to get to)

    hope this helps.



    برای جامپ از یک vlan به دیگر vlan ها استفاده میشه و برای اینکه بهتر متوجه بشی میتونی از این لینک استفاده کنی :

    اینجا


    ویرایش توسط key-one : 2011-06-05 در ساعت 02:40 PM

  3. #3
    نام حقيقي: احمد یزدانی (Poker)

    عضو ویژه شناسه تصویری A.Yazdani
    تاریخ عضویت
    Aug 2010
    محل سکونت
    Isfahan
    نوشته
    946
    سپاسگزاری شده
    1312
    سپاسگزاری کرده
    430
    نوشته های وبلاگ
    8
    attacker به یک packet دو tag اضافه میکند, بیرونی ترین همان native vlan tag است .switch چون میبینه اون tag native است اون رو میفرسته رو trunk و native tag رو هم بر میداره سمت دیگه یعنی switch دوم با tag دوم روبرو میشه (inner tag) که شماره یکی از vlan هاست .


    th95 سپاسگزاری کرده است.

کلمات کلیدی در جستجوها:

سوئیچ های سیسکو

سوییچهای سیسکوسویچ های سیسکو Vlan در سوئیچ های Cisco سوییچ های سیسکو

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •