ارتباط با 828 از طریق console

[LEFT]Establish a console session to the router:
This can be done with a direct console connection or a virtual Telnet connection. A direct console connection is preferred because a Telnet connection is lost during the reboot phase of the software installation (see step 8). The console connection is made with a rolled cable (flat black or blue cable), and connects the console port of the router to the [I]COM-port [/I]of the PC.

Launch [I]HyperTerminal [/I]on the PC, and use the following settings
[LEFT]
[LIST][*] 9600 bits per second[*] 8 data bits[*] 0 parity bits[*] 1 stop bit[*] No Flow Control[/LIST]
[/LEFT]
[/LEFT]