نمایش نتایج: از شماره 1 تا 2 از مجموع 2

موضوع: Install Call Manager Express (CME)

  
  1. #1
    نام حقيقي: Ali Imani

    عضو غیر فعال
    تاریخ عضویت
    May 2010
    محل سکونت
    tehran
    نوشته
    27
    سپاسگزاری شده
    13
    سپاسگزاری کرده
    10

    Install Call Manager Express (CME)


    Requirement:

    1.Cisco router with IOS voip support.
    2.TFTP Server
    3.CME file (you can dwonload it from Cisco website).

    Lets begin…

    1.Download CME file from Cisco website (file name: cme-gui-4.1.0.1.tar)
    2.Assign an IP address to Cisco LAN interface that same segment with your PC and test ping to your PC (example: 10.10.10.1).
    3.Install a TFTP server on your PC with same network with your cisco router (example: 10.10.10.2) and put CME file (file name: cme-gui-4.1.0.1.rar) in TFTP root direcory
    4.Activate HTTP and HTTPS Server.
    5.Instal CME on cisco router.
    6.And… finish.

    Router>
    Router>ena
    Password:
    Router#config term
    Router (config)#ip http server
    Router (config)#ip http authentication local
    Router (config)#ip http path flash:
    Router (config)#archive tar /xtract tftp://10.10.10.2/cme-4.1.0.1.tar
    Router (config)#username cmeadmin privilege 15 secret cisco
    Router (config)#line con 0
    Router (config-line)#logging sync
    Router (config-line)#end
    Router#

    And then open http://10.10.10.1/telephony-services.html from your PC.
    Fill username cmeadmin and password cisco, and ready to setup you IP Phone extension.





    موضوعات مشابه:
    ویرایش توسط aimani : 2010-05-17 در ساعت 01:24 PM

  2. #2
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    لینک جایی که از آن مطلب میگذارید فراموش نشود.
    کد:
    http://ciscogeek.org/install-call-manager-express-cme/
    نقل قول نوشته اصلی توسط aimani نمایش پست ها
    Requirement:

    1.Cisco router with IOS voip support.
    2.TFTP Server
    3.CME file (you can dwonload it from Cisco website).

    Lets begin…

    1.Download CME file from Cisco website (file name: cme-gui-4.1.0.1.tar)
    2.Assign an IP address to Cisco LAN interface that same segment with your PC and test ping to your PC (example: 10.10.10.1).
    3.Install a TFTP server on your PC with same network with your cisco router (example: 10.10.10.2) and put CME file (file name: cme-gui-4.1.0.1.rar) in TFTP root direcory
    4.Activate HTTP and HTTPS Server.
    5.Instal CME on cisco router.
    6.And… finish.

    Router>
    Router>ena
    Password:
    Router#config term
    Router (config)#ip http server
    Router (config)#ip http authentication local
    Router (config)#ip http path flash:
    Router (config)#archive tar /xtract tftp://10.10.10.2/cme-4.1.0.1.tar
    Router (config)#username cmeadmin privilege 15 secret cisco
    Router (config)#line con 0
    Router (config-line)#logging sync
    Router (config-line)#end
    Router#

    And then open http://10.10.10.1/telephony-services.html from your PC.
    Fill username cmeadmin and password cisco, and ready to setup you IP Phone extension.





کلمات کلیدی در جستجوها:

telecharger cme-gui-4.1.0.1.tar gratuit

cme-installer.nme

Cisco CME

cme-gui-4.1.0.1.tar

Download cme-gui-4.1.0.1.tar

کانفیگ cisco cme router

install cme gui 4.1.0.1

cisco ip phone

cme-gui-4.1.0.1.tar download

cme config

cisco callmanager

call manager

download cisco cme-gui

how to install cme express 4.1.0.1

telecharger cme-gui-4.1.0.1.tar

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •