کد:
http://wiki.nil.com/Video:Layer-3_switching_in_an_MPLS_VPN_site
The video describes the configuration of a router connecting a small remote site with layer-3 switches to the MPLS VPN network. The L3 switches use OSPF and the CE router uses BGP to exchange routes with the MPLS VPN network.
Contents

  • 1 Target audience
  • 2 Reference diagram
  • 3 Configuration commands
  • 4 Watch the video
  • 5 Initial configurations
  • 6 Final router configuration

Target audience

CCNA-level engineers who have to configure BGP on customer edge routers connected to MPLS VPN network.
Reference diagram


Configuration commands





router ospf id Select OSPF routing process configuration
network address mask area area Assign interfaces to OSPF areas
router bgp as-number Select BGP routing process configuration
redistribute ospf id match internal Redistribute internal OSPF routes into another routing protocol
redistribute bgp as-number subnets Redistribute BGP routes into OSPF
redistribute connected Redistribute directly connected IP subnets into BGP
default-information originate always Advertise default route into OSPF




موضوعات مشابه: