کد:
http://wiki.nil.com/Video:Small_site_using_BGP_on_two_uplinks_into_an_MPLS_VPN_network
The video describes the configuration of a redundant remote site design. The site has a single router that connects the site to the MPLS VPN network with two equal-speed uplinks. Both links are used in a load sharing setup. The router is using BGP as the PE-CE routing protocol.
Contents
- 1 Target audience
- 2 Other prerequisite knowledge
- 3 Reference diagram
- 4 Configuration commands
- 5 Router configurations
Target audience
CCNA-level engineers who have to configure BGP on customer edge routers connected to MPLS VPN network.
Other prerequisite knowledge
- Connect a small site to MPLS VPN network using BGP as the PE-CE routing protocol
Reference diagram
Configuration commands
router bgp Select the BGP routing process
neighbor ip-address remote-as as-number Configure a BGP neighbor
ip cef Enable Cisco Express Forwarding (CEF)
maximum-paths number Enable BGP load balancing
موضوعات مشابه: