کد:
http://wiki.nil.com/Video:Small_site_using_BGP_on_two_uplinks_into_an_MPLS_VPN_network
The video describes the configuration of a redundant remote site design. The site has a single router that connects the site to the MPLS VPN network with two equal-speed uplinks. Both links are used in a load sharing setup. The router is using BGP as the PE-CE routing protocol.
Contents



  • 1 Target audience
  • 2 Other prerequisite knowledge
  • 3 Reference diagram
  • 4 Configuration commands
  • 5 Router configurations

Target audience

CCNA-level engineers who have to configure BGP on customer edge routers connected to MPLS VPN network.
Other prerequisite knowledge


  • Connect a small site to MPLS VPN network using BGP as the PE-CE routing protocol

Reference diagram


Configuration commands





router bgp Select the BGP routing process
neighbor ip-address remote-as as-number Configure a BGP neighbor
ip cef Enable Cisco Express Forwarding (CEF)
maximum-paths number Enable BGP load balancing



موضوعات مشابه: