سلام.
من برای یک ارتباط POINT TO POINT از مودم های Tellabs مخابرات استفاده کردم و دو طرف هم یک روتر 1841 و یک روتر 1721 دارم حالا روتر 1721 رو با یک روتر 3640 عوض کردم و کانفیگ رو دقیقا اعمال کردم اما پورت سریال up نمی شه. لازمه که بگم از همون کارتWIC-1T روتر قبلی استفاده کردم پس کارت مشکلی نداره.
Router3640#show interfaces serial 0/0
Serial0/0 is down, line protocol is down
Hardware is QUICC Serial
Internet address is 192.168.200.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed
Closed: IPCP, CDPCP
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:16:47
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
30 second input rate 0 bits/sec, 0 packets/sec
30 second output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 28 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=up RTS=up CTS=down
موضوعات مشابه: