من هر دستوری می نویسم تو این نرم افزار این پیغام رو میده:
[LEFT][LTR]%Incomplete command.[/LTR]
[CODE][LTR]
Press Enter to Start
Router>
Router>
Router>enable
%Incomplete command.
Router>[/LTR][/CODE]
مشکل چیه؟
[/LEFT]
Printable View
من هر دستوری می نویسم تو این نرم افزار این پیغام رو میده:
[LEFT][LTR]%Incomplete command.[/LTR]
[CODE][LTR]
Press Enter to Start
Router>
Router>
Router>enable
%Incomplete command.
Router>[/LTR][/CODE]
مشکل چیه؟
[/LEFT]
کسی بلد نیست؟
[LEFT]
Boson NetSim LE functionality and supported commands
Boson NetSim LE has been specifically designed to support several labs from this book. What that means is that the exact commands required for those labs indeed work, but commands that aren't required for those labs aren't supported in the product.
As technology evolves, various technical recommendations provided by the numerous standards committees (and manufacturers that are affected by those modifications), change with the times.
This can be observed in interesting ways, all the way down to the Cisco router and Catalyst switch command line interface (or, “CLI” for short) level. For example, there are several different ways to configure a Cisco router to perform a save of its configuration data:
Method #1: The newer (or “modern”) CLI command, “Copy Run Start”, performs a save of the Cisco router’s configuration data. This CLI command is well documented in modern Cisco courseware, and is the currently recommended method.
Method #2: The older (or “legacy”) CLI command, “Write Mem”, performs an identical save of the same Cisco router’s configuration data. While this CLI command may still work, it is no longer documented in current Cisco courseware, and is no longer recommended.
The Boson NetSim™ LE (or Learning Edition) software product, as provided on the CDROM within the CCNA INTRO and CCNA ICND (640-8xxx series) books, simulates only those newer, or more modern, Cisco recommended and documented commands.
If you're having difficulty getting a supported lab to work, you might benefit from reading over the list of commands that Boson NetSim LE supports in each lab. For your convenience, a complete listing of all modern commands that are enabled for completing the included labs (that are documented as enabled in the printed books) are listed below.
Also note that Boson NetSim LE doesn't let you make as many mistakes as a real router or switch - for instance, using a different subnet mask than the lab requires will be rejected by NetSim. The list of commands includes the full syntax of the commands, so you can compare the commands you're typing to what NetSim is expecting. The list of commands are a direct pull of what the software is expecting.
INTRO Commands
The following [B]92 commands[/B] are supported by the Boson NetSim LE for the labs in the CCNA INTRO Exam Certification Guide.
Conf terminal
Hostname R1
Interface Serial 0
Ip address 163.1.12.201 255.255.255.128
Interface Serial 1
Ip address 163.1.13.201 255.255.255.128
Interface Ethernet 0
Ip address 163.1.1.201 255.255.255.128
Router rip
Network 163.1.0.0
Hostname R2
Ip address 163.1.12.202 255.255.255.128
Encapsulation ppp
Ip address 163.1.23.202 255.255.255.128
Ip address 163.1.2.202 255.255.255.128
Hostname R3
Ip address 163.1.13.203 255.255.255.128
Ip address 163.1.23.203 255.255.255.128
Ip address 163.1.3.203 255.255.255.128
Hostname Sw3
Enable secret cisco
Line vty 0 15
Password cisco
Login
Line console 0
Login
Password cisco
Interface vlan 1
Ip address 163.1.1.213 255.255.255.128
No shutdown
Ip default-gateway 163.1.1.201
Interface fastethernet 0/1
Description trunk to SW1
Interface fastethernet 0/2
Description trunk to SW2
Copy running-config startup-config
Show ip interface brief
Show access-lists
Show ip protocol
Show running-config
Show ip arp
Show ip route
Trace 163.1.13.203
Ping 163.1.13.203
Ip address 10.1.1.1 255.255.255.0
Enable
Disable
Show interface serial 0
Show version
Show flash
Hostname Hannah
Write terminal
Show config
Clock set 16:52:30 31 Dec 2001
Lab 5.pdf
Reload in 600 cause I want to
Erase nvram
Show interfaces status
Show version
Show flash
Hostname Wendell
Hostname sw12
Interface fastethernet 0/1
Enable secret cisco
Interface vlan 1
Ip address 172.30.101.101 255.255.255.0
Exit
Ip default-gateway 172.30.101.1
Lab 6
Write erase
Reload
Enable password fred
Interface Ethernet 0
Ip address 172.30.101.1 255.255.255.0
Interface serial 0
Ip address 172.30.102.1 255.255.255.0
Line vty 0 4
Login
Password cisco
Interface Ethernet 0
Ip address 172.30.103.2 255.255.255.0
Interface serial 0
Ip address 172.30.102.2 255.255.255.0
Clock rate 56000
Ping 172.30.102.2
Ping 172.30.103.2
Extended pings
telnet 172.30.102.2
show users
show sessions
ip host R2 172.30.102.2
telnet R2
show cdp entry *
show cdp neighbor
show cdp interface
ICND Commands
The following 171 commands are supported by the Boson NetSim LE for the labs in the CCNA ICND Exam Certification Guide
Lab7.pdf
Interface serial 0
Encapsulation frame-relay
Ip address 168.11.123.201 255.255.255.192
Frame-relay interface-dlci 502
Frame-relay interface-dlci 503
Interface Ethernet 0
Ip address 168.11.11.101 255.255.255.192
Router igrp 1
Network 168.11.0.0
Ip address 168.11.123.202 255.255.255.192
Frame-relay interface-dlic 501
Frame-relay interface-dlic 503
Ip address 168.11.12.102 255.255.255.192
Ip address 168.11.123.203 255.255.255.192
Frame-relay interface-dlic 501
Frame-relay interface-dlic 502
Ip address 168.11.13.103 255.255.255.192
Ip route 168.11.12.64 255.255.255.192 168.11.123.202
Ip route 168.11.11.64 255.255.255.192 168.11.123.201
Ip route 168.11.13.64 255.255.255.192 168.11.123.203
Ip route 168.11.12.64 255.255.255.192 168.11.123.202
Frame-relay map ip 168.11.123.202 502 broadcast
Frame-relay map ip 168.11.123.201 501 broadcast
Frame-relay map ip 168.11.123.203 503 broadcast
Frame-relay map ip 168.11.123.202 502 broadcast
Show ip interface brief
Debug ip igrp transactions
Show interface
Show ip protocol
Show frame-relay pvc
Show frame-relay map
Show frame-relay lmi
Interface serial0
Encapsulation frame-relay
Interface serial 0.2 point-to-point
Ip address 170.1.10.1 255.255.254.0
Frame-relay interface-dlci 302
Ip access-group 102 in
Interface serial 0.3 point-to-point
Ip address 170.1.12.1 255.255.254.0
Frame-relay interface-dlci 303
Ip access-group 103 in
Interface serial 0.4 point-to-point
Ip address 170.1.14.1 255.255.254.0
Frame-relay interface-dlci 304 ietf
Ip access-group 104 in
Interface Ethernet 0
Ip address 170.1.3.1 255.255.254.0
Router igrp 1
Network 170.1.0.0
Access-list 102 permit tcp any host 170.1.2.11 eq ftp
Access-list 102 permit tcp any host 170.1.2.11 eq www
Access-list 102 permit tcp any host 170.1.2.12 eq ftp
Access-list 102 permit tcp any host 170.1.2.12 eq www
Access-list 102 deny ip any host 170.1.2.11
Access-list 102 deny ip any host 170.1.2.12
Access-list 102 deny ip 170.1.4.0 0.0.1.255 170.1.6.0 0.0.1.255
Access-list 102 permit ip any any
Access-list 103 permit tcp any host 170.1.2.11 eq ftp
Access-list 103 permit tcp any host 170.1.2.11 eq www
Access-list 103 permit tcp any host 170.1.2.12 eq ftp
Access-list 103 permit tcp any host 170.1.2.12 eq www
Access-list 103 deny ip any host 170.1.2.11
Access-list 103 deny ip any host 170.1.2.12
Access-list 103 deny ip 170.1.6.0 0.0.1.255 170.1.4.0 0.0.1.255
Access-list 103 permit ip any any
Access-list 104 permit tcp any host 170.1.2.11 eq ftp
Access-list 104 permit tcp any host 170.1.2.11 eq www
Access-list 104 permit tcp any host 170.1.2.12 eq ftp
Access-list 104 permit tcp any host 170.1.2.12 eq www
Access-list 104 deny ip any host 170.1.2.11
Access-list 104 deny ip any host 170.1.2.12
Access-list 104 permit ip any any
Interface serial 0
Encapsulation frame-relay
Interface serial 0.1 point-to-point
Ip address 170.1.10.2 255.255.254.0
Frame-relay interface-dlci 301
Interface Ethernet 0
Ip address 170.1.5.2 255.255.254.0
Router igrp 1
Network 170.1.0.0
Interface serial 0
Encapsulation frame-relay
Interface serial 0.1 point-to-point
Ip address 170.1.12.3 255.255.254.0
Frame-relay interface-dlci 301
Interface Ethernet 0
Ip address 170.1.7.3 255.255.254.0
Router igrp 1
Network 170.1.0.0
Interface serial 0
Encapsulation frame-relay ietf
Interface serial 0.1 point-to-point
Ip address 170.1.14.4 255.255.254.0
Frame-relay interface-dlci 301
Interface Ethernet 0
Ip address 170.1.9.4 255.255.254.0
Router igrp 1
Network 170.1.0.0
Show frame-relay map
Show cdp neighbor detail
Lab 18
Ip route 172.30.103.0 255.255.255.0 serial 0
Ip route 172.30.101.0 255.255.255.0 172.30.102.1
Router rip
Network 172.30.0.0
Router igrp 1
Network 172.30.0.0
Debug ip igrp events
Debug ip igrp transactions
Debug ip rip events
No debug all
Lab 19
Ip http server
Access-list 101 permit icmp any 172.30.103.0 0.0.0.255
Access-list 101 deny tcp any host 172.30.103.2 eq telnet
Access-list 101 permit tcp any 172.30.103.0 0.0.0.255 eq telnet
Access-list 101 permit tcp any 172.30.103.0 0.0.0.255 eq www
Access-list 101 permit tcp any host 172.30.102.2
Interface serial 0
Ip access-group in
Ip access-list extended fred
Permit icmp any 172.30.103.0 0.0.0.255
Deny tcp any host 172.30.103.2 eq telnet
Permit tcp any 172.30.103.0 0.0.0.255 eq www
Permit tcp any host 172.30.102.2 eq telnet
Ip access-group fred in
No ip access-group fred in
Access-list 101 permit icmp 172.30.103.0 0.0.0.255 any
Access-list 101 deny tcp host 172.30.103.2 eq telnet any
Access-list 101 permit tcp 172.30.103.0 0.0.0.255 eq telnet any
Access-list 101 permit tcp 172.30.103.0 0.0.0.255 eq www any
Access-list 101 permit tcp 172.30.102.2 eq telnet any
Interface serial 0
Ip access-group 101 in
Write mem
Lab 20
Debug ppp negotiation
Interface serial 1
Ip address 172.30.104.2 255.255.255.0
No frame-relay inverse-arp
Clear frame-relay inarp
Frame-relay map ip 172.30.104.2 202 broadcast
Frame-relay map ip 172.30.104.1 201 broadcast
Encapsulation hdlc
No ip address
Interface serial 1.1 point-to-point
Ip address 172.30.104.1 255.255.255.0
Frame-relay interface-dlci 202
Interface serial 1.1 point-to-point
Ip address 172.30.104.2 255.255.255.0
Frame-relay interface-dlci 201
Encapsulation frame-relay ietf
Lab 21
Vlan database
Vlan 2 name barney-2
Vlan 3 name Wilma-3
Interface fastethernet 0/5
Switchport mode access
Switcport access vlan 2
Interface fastethernet 0/6
Interface fastethernet 0/7
Interface fastethernet 0/8
Interface fastethernet 0/9 – 12
Interface fastethernet 0/12
Switchport mode dynamic desirable
Vlan database
Vtp domain fred
Show vtp status
Show interfaces fastethernet 0/12 switchport
Show interfaces fastethernet 0/12 trunk
[B]Difference between CCNA 2.0 material and the new ICND/INTRO material[/B]
One big difference is the inclusion of the 2950 switches these switches still run on the Cisco IOS but the command line syntax is a little different. For example on the 1912 Catalyst to configure a vlan you would use the following set of commands:
Switch>enable
Switch#config t
Switch(config)#vlan 12 name cisco
On the new Catalyst 2950 switches the command structure is a little different. Now you type:
Switch>enable
Switch#vlan database
Switch(vlan)#vlan 12 name cisco
Notice there is a completely new mode most of you are not familiar with. This mode is the vlan database mode denoted by the (vlan) brackets. This is just one example of the new material included with the new version of the CCNA ICND/INTRO exam
[URL]http://www.boson.com/NetSimFAQ.html[/URL]
[/LEFT]
[LEFT][CENTER]
[URL="http://pixhost.ws/pictures/410405"][IMG]http://pixhost.ws/avaxhome/2008-03-01/2199mag.jpg[/IMG][/URL]
[/CENTER]
[B]Boson Router Simulator 6 | 23 MB[/B]
Cisco CCNA Network Simulator is a boxed software product derived from the previously self-published Boson NetSim from Boson Software. It provides users with a means to develop hands-on skills at the CCNA level without the investment in expensive hardware. The software, which includes the Boson Router Simulator, was designed to give users the skills needed to pass the new CCNA 800 series exams (640-801, 640-811, and 640-821). The combination of Cisco IOS and Catalyst simulated command line interface (CLI) establishes a foundation of knowledge that is integral to CCNA success, both in taking the CCNA exams and in one’s daily job as a CCNA professional.
The title includes a drag-and-drop Network Designer that supports up to 200 devices using 45 different device models, including 40 different router models and 2 Catalyst switch models. Users can have up to 200 active Telnet sessions configuring devices inside the simulator. This unique feature allows users to create their own lab topologies, freeing them for the first time from the configurations locked in place by the software vendor. Currently no other network simulation package offers this much versatility and support.
[B]RS Download[/B]
[URL="http://rapidshare.com/files/96054144/Boson_Router_Simulator_Pastilan_with_Crack.rar"]RapidShare: 1-CLICK Web hosting - Easy Filehosting[/URL]
[CENTER]
[URL="http://pixhost.ws/pictures/302225"][IMG]http://pixhost.ws/avaxhome/2007-10-30/folder.jpg[/IMG][/URL]
[/CENTER]
[B]Boson NetSim for CCNP 7.0 | 26 MB
[/B]
The Boson NetSim simulates both switching bridge tables and routing protocol tables to allow you to go OUTSIDE the labs. The Boson NetSim makes it possible to design and configure a network with 40 different router models and three different Catalyst models to choose from. BSCI, BCRAN, BCMSN and CIT labs are available in the current version.
[B]Features included in the Boson NetSim for CCNP[/B]
- IPv6 addressing
- OSPFv3 using IPv6 addresses
- Multicasting configuration
- New command parser
- Improved command speed
- Lab compiler application to create your own lab packages
- New structure for the Lab Navigator
- New implementation of OSPF, now with Multi-Area
- Summarization for RIPv2 and EIGRP
- New implementation of the routing table
- Update utility included to download latest files available
- Smaller installer
Appz homepage:
[URL="http://www.boson.com/Product/CIS-NS-CCNP-02.html"][B]Click Here[/B][/URL]
[B]Download:[/B]
[URL="http://rapidshare.com/files/65864973/Boson.Network.Simulator.7.for.CCNP.part1.rar"][B]Part.01
[/B][/URL][URL="http://rapidshare.com/files/65864974/Boson.Network.Simulator.7.for.CCNP.part2.rar"][B]Part.02
[/B][/URL]
[B]Boson Collection[/B]
* Boson Cisco Router CCIE Lab Practice Tests v5.67
* Boson Check Point Firewall Practice Tests v5.68
* Boson BICSI RCDD Practice Tests v5.68
* Boson Cisco Router CCIE Lab Practice Tests v5.68
* Boson Cisco Router Channel Partner Practice Tests v5.65
* Boson Cisco Router Practice Tests v5.68
* Boson Cisco Router Specialization Practice Tests v5.67
* Boson Cisco Router Specialization Practice Tests v5.68
* Boson Citrix Thin Client Practice Tests v5.68
* Boson CIW Practice Tests v5.68
* Boson Compaq Hardware Practice Tests v5.68
* Boson CompTIA Standardized Practice Tests v5.68
* Boson EC Council CEH Practice Tests v5.68
* Boson Foundry Practice Tests v5.68
* Boson HP Practice Tests v5.68
* Boson IBM Practice Tests v5.68
* Boson ISACA CISA Practice Tests v5.68
* Boson ISC2 CISSP SSCP Practice Tests v5.68
* Boson Juniper Practice Tests v5.68
* Boson Lotus Professional Practice Tests v5.68
* Boson Medical Practice Tests v5.68
* Boson Microsoft Practice Tests v5.68
* Boson NASD Business Practice Tests v5.68
* Boson Oracle DBA Practice Tests v5.68
* Boson Planet3 Wireless CWNP Practice Tests v5.68
* Boson Project Management Institute PMP Practice Tests v5.68
* Boson SAT Practice Tests v5.68
* Boson Solomon Practice Tests v5.68
* Boson Sun UNIX LPI Red Hat Linux Practice Tests v5.68
* Boson Sybase Practice Tests v5.68
* Boson TeacherTests Praxis Practice Tests v5.68
[B]Rapidshare.com[/B]
Code:
[url]http://rapidshare.com/files/32212634/Boson.Check.Point.Firewall.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212555/Boson.Cisco.Router.CCIE.Lab.Practice.Tests.v5.67-RBS.rar[/url]
[url]http://rapidshare.com/files/32212561/Boson.CIW.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212557/Boson.Compaq.Hardware.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212566/Boson.CompTIA.Standardized.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212562/Boson.EC.Council.CEH.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212569/Boson.Foundry.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212564/Boson.HP.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212563/Boson.ISACA.CISA.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212570/Boson.Juniper.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212577/Boson.Lotus.Professional.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212583/Boson.Microsoft.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212578/Boson.Oracle.DBA.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212581/Boson.Planet3.Wireless.CWNP.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212580/Boson.Project.Management.Institute.PMP.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212579/Boson.SAT.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212584/Boson.Solomon.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212588/Boson.Sun.UNIX.LPI.Red.Hat.Linux.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212586/Boson.Sybase.Practice.Tests.v5.68-RBS.rar[/url]
[url]http://rapidshare.com/files/32212593/Boson.TeacherTests.Praxis.Practice.Tests.v5.68-RBS.rar[/url]
[/LEFT]
من میگم مشکل دارم، شما لینک دانلود میفرستید؟
شما اصلأ مطلب را خواندید که چه Command میشه استفاده کرد و چه جوری باید تایپ کرد؟؟
چیزی که شما می خواهید اجرا کنید بالا تو لیست نوشته شده؟؟
این لینکها را برای این اینجا گذاشتم که بیخود یک صفحه جدید باز نکنم ، چون لینکها در مورد همین برنامه است
من میگم هر دستور میزنم میگه: %Incomplete command.
چه کنم؟
تو هر Lab فقط دستور خاصی اجرا می شه و باید دقیق مثل بالا باشه
[LEFT][RIGHT]شما از این برنامه استفاده کن . مجانی است و خیلی بهتر از Boson Netsim هست
[/RIGHT]
[LEFT][URL="http://www.gns3.net/sites/default/files/screenshot-complex-lab.mini_.png"]http://www.gns3.net/download[/URL]
[URL="http://www.gns3.net/sites/default/files/screenshot-complex-lab.mini_.png"]
[/URL][/LEFT]
[CENTER][URL="http://www.gns3.net/sites/default/files/screenshot-frame-relay-lab.mini_.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/screenshot-frame-relay-lab.mini.png[/IMG][/URL][/CENTER]
[CENTER]
[URL="http://www.gns3.net/sites/default/files/screenshot-ethsw-lab.mini_.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/screenshot-ethsw-lab.mini.png[/IMG][/URL][/CENTER]
[CENTER][URL="http://www.gns3.net/sites/default/files/thumb_11-screenshot-gns-3.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/thumb_11-screenshot-gns-3.png[/IMG][/URL][/CENTER]
[CENTER][URL="http://www.gns3.net/sites/default/files/screenshot-simple-emulation-2.mini_.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/screenshot-simple-emulation-2.mini.png[/IMG][/URL][/CENTER]
[CENTER][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/screenshot-console.png[/IMG][/CENTER]
[CENTER][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/thumb_16-screenshot-gns-3.png[/IMG][/CENTER]
[CENTER][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/thumb_17-screenshot-gns-3.png[/IMG][/CENTER]
[B]Labs examples:
[CENTER][URL="http://www.gns3.net/sites/gns3.net/files/images/screenshots/dmvpn_lab.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/dmvpn_lab_min.png[/IMG][/URL][/CENTER]
[CENTER][URL="http://www.gns3.net/sites/gns3.net/files/images/screenshots/mpls_lab.png"][IMG]http://www.gns3.net/sites/gns3.net/files/images/screenshots/mpls_lab_min.png[/IMG][/URL][/CENTER]
[/B]
-----------------------------------------------------------------------------------------------------------------------------
[RIGHT]این هم برایتان پیدا کردم. 600 Command را ساپورت می کند
[LEFT] [CENTER] [IMG]http://pixhost.ws/avaxhome/78/dd/0009dd78_medium.gif[/IMG]
[/CENTER]
[B]RouterSim BSCI Network Visualizer 6.0 | 47,2 MB[/B]
RouterSim's BSCIâ„¢ Network Visualizer 6.0 is a CCNA and BSCI router and network simulator and is RouterSim's most robust product. You can design, build and configure your own network.
With a program that offers 600 supported commands and over 230 labs, you are empowered to build, test and preview a large variety of networks! BSCI™ Network Visualizer® 6.0 is ideal for:
Anyone studying for the Cisco® CCNA™ 640-802 exam and the BSCI™ 642-901 exam
Deployment over a LAN network
Distance education and deployment on a Citrix server or Microsoft Terminal Services
Corporate trainers and employees
Students at colleges, universities, and technical institutes
Program Features ...
Contains all labs and supported commands from our CCNA Network Visualizer 6.0 package
Added new BSCI labs
Added the 2811 router with four serial interfaces
Added the 2960 switch and the 3560 switch
This program has 28 practice scenarios based on Cisco® 640-802 test objectives and Cisco® 642-901 test objectives that can be graded with our Net Assessment software engine
Offers labs on the SDM
Offers labs on the SSH
Offers labs on IPv6 and OSPFv3
Revamped CCNA and BSCI labs that include more educational material
You have the option of using RouterSim® or Cisco® devices in creating/viewing networks
There are 30, self-contained, Individual labs that can be graded with our Net Assessment software engine
Custom Labs ... Create and share your labs with others via the Network Visualizer menu. This is ideal for instructors
Net Assessment ... for instructors and all other users. Test and evaluate your problem solving and troubleshooting skills
Net Packet Monitor ... You can view a packet real time as it travels through your network
Code:
[URL="http://rapidshare.com/files/167352376/riotemosn.rar"]RapidShare: 1-CLICK Web hosting - Easy Filehosting[/URL]
[/LEFT]
[/RIGHT]
[/LEFT]
ممنون patris :)
خواهش می کنم
همانقدر که مورد استفادتون قرار گرفت خوشحالم کرد
[QUOTE=sca_ir;230782]من هر دستوری می نویسم تو این نرم افزار این پیغام رو میده:
[LEFT][LTR]%Incomplete command.[/LTR]
[CODE][LTR]
Press Enter to Start
Router>
Router>
Router>enable
%Incomplete command.
Router>[/LTR][/CODE]
مشکل چیه؟
[/LEFT][/QUOTE]
سلام
من هم مشکل این دوستمون رو دارم
جناب پاتريس
با تشكر از پست هاي خوب شما. تا حالا Simulator اي ديديد كه بتونه Layer 3 Switch رو شبيه سازي كنه ؟
دنبال Lab اي مي گردم كه بشه از دستورات BCMSN توش استفاده كرد.
خودم چيزي كه پيدا كردم يه ماژول سوئچ روي( 3600) Dynamips بود ولي همانطور كه مي دونيد يه همچين تركيبي به Router بيشتر شبيه تا L3 Switch
شنیدم كه این کار را این ورژن Boson NetSim میکند
[LEFT]Boson NetSim for CCNP 7.0 | 26 MB
The Boson NetSim simulates both switching bridge tables and routing protocol tables to allow you to go OUTSIDE the labs. The Boson NetSim makes it possible to design and configure a network with 40 different router models and three different Catalyst models to choose from. BSCI, BCRAN, BCMSN and CIT labs are available in the current version.
Features included in the Boson NetSim for CCNP
- IPv6 addressing
- OSPFv3 using IPv6 addresses
- Multicasting configuration
- New command parser
- Improved command speed
- Lab compiler application to create your own lab packages
- New structure for the Lab Navigator
- New implementation of OSPF, now with Multi-Area
- Summarization for RIPv2 and EIGRP
- New implementation of the routing table
- Update utility included to download latest files available
- Smaller installer
[CODE]http://rapidshare.com/files/65864973/Boson.Network.Simulator.7.for.CCNP.part1.rar
http://rapidshare.com/files/65864974/Boson.Network.Simulator.7.for.CCNP.part2.rar[/CODE][/LEFT]