صفحه 1 از 3 1 2 3 آخرینآخرین
نمایش نتایج: از شماره 1 تا 15 از مجموع 42

موضوع: مشکل در نرم افزار Boson NetSim

  
  1. #1
    نام حقيقي: Mehran,R

    عضو غیر فعال
    تاریخ عضویت
    Oct 2008
    محل سکونت
    Nowhere
    نوشته
    15
    سپاسگزاری شده
    0
    سپاسگزاری کرده
    6

    مشکل در نرم افزار Boson NetSim

    من هر دستوری می نویسم تو این نرم افزار این پیغام رو میده:
    %Incomplete command.


    کد:
    
    Press Enter to Start
    
    Router>
    Router>
    Router>enable
    %Incomplete command. 
    
    Router>

    مشکل چیه؟




    موضوعات مشابه:

  2. #2
    نام حقيقي: Mehran,R

    عضو غیر فعال
    تاریخ عضویت
    Oct 2008
    محل سکونت
    Nowhere
    نوشته
    15
    سپاسگزاری شده
    0
    سپاسگزاری کرده
    6
    کسی بلد نیست؟



  3. #3
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272

    Boson NetSim LE functionality and supported commands

    Boson NetSim LE has been specifically designed to support several labs from this book. What that means is that the exact commands required for those labs indeed work, but commands that aren't required for those labs aren't supported in the product.

    As technology evolves, various technical recommendations provided by the numerous standards committees (and manufacturers that are affected by those modifications), change with the times.

    This can be observed in interesting ways, all the way down to the Cisco router and Catalyst switch command line interface (or, “CLI” for short) level. For example, there are several different ways to configure a Cisco router to perform a save of its configuration data:

    Method #1: The newer (or “modern”) CLI command, “Copy Run Start”, performs a save of the Cisco router’s configuration data. This CLI command is well documented in modern Cisco courseware, and is the currently recommended method.

    Method #2: The older (or “legacy”) CLI command, “Write Mem”, performs an identical save of the same Cisco router’s configuration data. While this CLI command may still work, it is no longer documented in current Cisco courseware, and is no longer recommended.

    The Boson NetSim™ LE (or Learning Edition) software product, as provided on the CDROM within the CCNA INTRO and CCNA ICND (640-8xxx series) books, simulates only those newer, or more modern, Cisco recommended and documented commands.

    If you're having difficulty getting a supported lab to work, you might benefit from reading over the list of commands that Boson NetSim LE supports in each lab. For your convenience, a complete listing of all modern commands that are enabled for completing the included labs (that are documented as enabled in the printed books) are listed below.

    Also note that Boson NetSim LE doesn't let you make as many mistakes as a real router or switch - for instance, using a different subnet mask than the lab requires will be rejected by NetSim. The list of commands includes the full syntax of the commands, so you can compare the commands you're typing to what NetSim is expecting. The list of commands are a direct pull of what the software is expecting.












    INTRO Commands
    The following 92 commands are supported by the Boson NetSim LE for the labs in the CCNA INTRO Exam Certification Guide.

    Conf terminal
    Hostname R1
    Interface Serial 0
    Ip address 163.1.12.201 255.255.255.128
    Interface Serial 1
    Ip address 163.1.13.201 255.255.255.128
    Interface Ethernet 0
    Ip address 163.1.1.201 255.255.255.128
    Router rip
    Network 163.1.0.0
    Hostname R2
    Ip address 163.1.12.202 255.255.255.128
    Encapsulation ppp
    Ip address 163.1.23.202 255.255.255.128
    Ip address 163.1.2.202 255.255.255.128
    Hostname R3
    Ip address 163.1.13.203 255.255.255.128
    Ip address 163.1.23.203 255.255.255.128
    Ip address 163.1.3.203 255.255.255.128
    Hostname Sw3
    Enable secret cisco
    Line vty 0 15
    Password cisco
    Login
    Line console 0
    Login
    Password cisco
    Interface vlan 1
    Ip address 163.1.1.213 255.255.255.128
    No shutdown
    Ip default-gateway 163.1.1.201
    Interface fastethernet 0/1
    Description trunk to SW1
    Interface fastethernet 0/2
    Description trunk to SW2
    Copy running-config startup-config
    Show ip interface brief
    Show access-lists
    Show ip protocol
    Show running-config
    Show ip arp
    Show ip route
    Trace 163.1.13.203
    Ping 163.1.13.203
    Ip address 10.1.1.1 255.255.255.0
    Enable
    Disable
    Show interface serial 0
    Show version
    Show flash
    Hostname Hannah
    Write terminal
    Show config
    Clock set 16:52:30 31 Dec 2001

    Lab 5.pdf
    Reload in 600 cause I want to
    Erase nvram
    Show interfaces status
    Show version
    Show flash
    Hostname Wendell
    Hostname sw12
    Interface fastethernet 0/1
    Enable secret cisco
    Interface vlan 1
    Ip address 172.30.101.101 255.255.255.0
    Exit
    Ip default-gateway 172.30.101.1

    Lab 6
    Write erase
    Reload
    Enable password fred
    Interface Ethernet 0
    Ip address 172.30.101.1 255.255.255.0
    Interface serial 0
    Ip address 172.30.102.1 255.255.255.0
    Line vty 0 4
    Login
    Password cisco
    Interface Ethernet 0
    Ip address 172.30.103.2 255.255.255.0
    Interface serial 0
    Ip address 172.30.102.2 255.255.255.0
    Clock rate 56000
    Ping 172.30.102.2
    Ping 172.30.103.2

    Extended pings
    telnet 172.30.102.2
    show users
    show sessions
    ip host R2 172.30.102.2
    telnet R2
    show cdp entry *
    show cdp neighbor
    show cdp interface



    ICND Commands
    The following 171 commands are supported by the Boson NetSim LE for the labs in the CCNA ICND Exam Certification Guide

    Lab7.pdf
    Interface serial 0
    Encapsulation frame-relay
    Ip address 168.11.123.201 255.255.255.192
    Frame-relay interface-dlci 502
    Frame-relay interface-dlci 503
    Interface Ethernet 0
    Ip address 168.11.11.101 255.255.255.192
    Router igrp 1
    Network 168.11.0.0
    Ip address 168.11.123.202 255.255.255.192
    Frame-relay interface-dlic 501
    Frame-relay interface-dlic 503
    Ip address 168.11.12.102 255.255.255.192
    Ip address 168.11.123.203 255.255.255.192
    Frame-relay interface-dlic 501
    Frame-relay interface-dlic 502
    Ip address 168.11.13.103 255.255.255.192
    Ip route 168.11.12.64 255.255.255.192 168.11.123.202
    Ip route 168.11.11.64 255.255.255.192 168.11.123.201
    Ip route 168.11.13.64 255.255.255.192 168.11.123.203
    Ip route 168.11.12.64 255.255.255.192 168.11.123.202
    Frame-relay map ip 168.11.123.202 502 broadcast
    Frame-relay map ip 168.11.123.201 501 broadcast
    Frame-relay map ip 168.11.123.203 503 broadcast
    Frame-relay map ip 168.11.123.202 502 broadcast
    Show ip interface brief
    Debug ip igrp transactions
    Show interface
    Show ip protocol
    Show frame-relay pvc
    Show frame-relay map
    Show frame-relay lmi
    Interface serial0
    Encapsulation frame-relay
    Interface serial 0.2 point-to-point
    Ip address 170.1.10.1 255.255.254.0
    Frame-relay interface-dlci 302
    Ip access-group 102 in
    Interface serial 0.3 point-to-point
    Ip address 170.1.12.1 255.255.254.0
    Frame-relay interface-dlci 303
    Ip access-group 103 in
    Interface serial 0.4 point-to-point
    Ip address 170.1.14.1 255.255.254.0
    Frame-relay interface-dlci 304 ietf
    Ip access-group 104 in
    Interface Ethernet 0
    Ip address 170.1.3.1 255.255.254.0
    Router igrp 1
    Network 170.1.0.0
    Access-list 102 permit tcp any host 170.1.2.11 eq ftp
    Access-list 102 permit tcp any host 170.1.2.11 eq www
    Access-list 102 permit tcp any host 170.1.2.12 eq ftp
    Access-list 102 permit tcp any host 170.1.2.12 eq www
    Access-list 102 deny ip any host 170.1.2.11
    Access-list 102 deny ip any host 170.1.2.12
    Access-list 102 deny ip 170.1.4.0 0.0.1.255 170.1.6.0 0.0.1.255
    Access-list 102 permit ip any any

    Access-list 103 permit tcp any host 170.1.2.11 eq ftp
    Access-list 103 permit tcp any host 170.1.2.11 eq www
    Access-list 103 permit tcp any host 170.1.2.12 eq ftp
    Access-list 103 permit tcp any host 170.1.2.12 eq www
    Access-list 103 deny ip any host 170.1.2.11
    Access-list 103 deny ip any host 170.1.2.12
    Access-list 103 deny ip 170.1.6.0 0.0.1.255 170.1.4.0 0.0.1.255
    Access-list 103 permit ip any any

    Access-list 104 permit tcp any host 170.1.2.11 eq ftp
    Access-list 104 permit tcp any host 170.1.2.11 eq www
    Access-list 104 permit tcp any host 170.1.2.12 eq ftp
    Access-list 104 permit tcp any host 170.1.2.12 eq www
    Access-list 104 deny ip any host 170.1.2.11
    Access-list 104 deny ip any host 170.1.2.12
    Access-list 104 permit ip any any

    Interface serial 0
    Encapsulation frame-relay
    Interface serial 0.1 point-to-point
    Ip address 170.1.10.2 255.255.254.0
    Frame-relay interface-dlci 301
    Interface Ethernet 0
    Ip address 170.1.5.2 255.255.254.0
    Router igrp 1
    Network 170.1.0.0

    Interface serial 0
    Encapsulation frame-relay
    Interface serial 0.1 point-to-point
    Ip address 170.1.12.3 255.255.254.0
    Frame-relay interface-dlci 301
    Interface Ethernet 0
    Ip address 170.1.7.3 255.255.254.0
    Router igrp 1
    Network 170.1.0.0

    Interface serial 0
    Encapsulation frame-relay ietf
    Interface serial 0.1 point-to-point
    Ip address 170.1.14.4 255.255.254.0
    Frame-relay interface-dlci 301
    Interface Ethernet 0
    Ip address 170.1.9.4 255.255.254.0
    Router igrp 1
    Network 170.1.0.0
    Show frame-relay map
    Show cdp neighbor detail

    Lab 18

    Ip route 172.30.103.0 255.255.255.0 serial 0
    Ip route 172.30.101.0 255.255.255.0 172.30.102.1
    Router rip
    Network 172.30.0.0
    Router igrp 1
    Network 172.30.0.0
    Debug ip igrp events
    Debug ip igrp transactions
    Debug ip rip events
    No debug all

    Lab 19
    Ip http server
    Access-list 101 permit icmp any 172.30.103.0 0.0.0.255
    Access-list 101 deny tcp any host 172.30.103.2 eq telnet
    Access-list 101 permit tcp any 172.30.103.0 0.0.0.255 eq telnet
    Access-list 101 permit tcp any 172.30.103.0 0.0.0.255 eq www
    Access-list 101 permit tcp any host 172.30.102.2
    Interface serial 0
    Ip access-group in
    Ip access-list extended fred
    Permit icmp any 172.30.103.0 0.0.0.255
    Deny tcp any host 172.30.103.2 eq telnet
    Permit tcp any 172.30.103.0 0.0.0.255 eq www
    Permit tcp any host 172.30.102.2 eq telnet
    Ip access-group fred in
    No ip access-group fred in
    Access-list 101 permit icmp 172.30.103.0 0.0.0.255 any
    Access-list 101 deny tcp host 172.30.103.2 eq telnet any
    Access-list 101 permit tcp 172.30.103.0 0.0.0.255 eq telnet any
    Access-list 101 permit tcp 172.30.103.0 0.0.0.255 eq www any
    Access-list 101 permit tcp 172.30.102.2 eq telnet any
    Interface serial 0
    Ip access-group 101 in
    Write mem

    Lab 20

    Debug ppp negotiation
    Interface serial 1
    Ip address 172.30.104.2 255.255.255.0
    No frame-relay inverse-arp
    Clear frame-relay inarp
    Frame-relay map ip 172.30.104.2 202 broadcast
    Frame-relay map ip 172.30.104.1 201 broadcast
    Encapsulation hdlc
    No ip address
    Interface serial 1.1 point-to-point
    Ip address 172.30.104.1 255.255.255.0
    Frame-relay interface-dlci 202
    Interface serial 1.1 point-to-point
    Ip address 172.30.104.2 255.255.255.0
    Frame-relay interface-dlci 201
    Encapsulation frame-relay ietf


    Lab 21
    Vlan database
    Vlan 2 name barney-2
    Vlan 3 name Wilma-3
    Interface fastethernet 0/5
    Switchport mode access
    Switcport access vlan 2
    Interface fastethernet 0/6
    Interface fastethernet 0/7
    Interface fastethernet 0/8
    Interface fastethernet 0/9 – 12
    Interface fastethernet 0/12
    Switchport mode dynamic desirable
    Vlan database
    Vtp domain fred
    Show vtp status
    Show interfaces fastethernet 0/12 switchport
    Show interfaces fastethernet 0/12 trunk



    Difference between CCNA 2.0 material and the new ICND/INTRO material

    One big difference is the inclusion of the 2950 switches these switches still run on the Cisco IOS but the command line syntax is a little different. For example on the 1912 Catalyst to configure a vlan you would use the following set of commands:

    Switch>enable
    Switch#config t
    Switch(config)#vlan 12 name cisco


    On the new Catalyst 2950 switches the command structure is a little different. Now you type:

    Switch>enable
    Switch#vlan database
    Switch(vlan)#vlan 12 name cisco

    Notice there is a completely new mode most of you are not familiar with. This mode is the vlan database mode denoted by the (vlan) brackets. This is just one example of the new material included with the new version of the CCNA ICND/INTRO exam


    http://www.boson.com/NetSimFAQ.html




    ویرایش توسط patris1 : 2009-09-25 در ساعت 02:32 PM

  4. #4
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272


    Boson Router Simulator 6 | 23 MB

    Cisco CCNA Network Simulator is a boxed software product derived from the previously self-published Boson NetSim from Boson Software. It provides users with a means to develop hands-on skills at the CCNA level without the investment in expensive hardware. The software, which includes the Boson Router Simulator, was designed to give users the skills needed to pass the new CCNA 800 series exams (640-801, 640-811, and 640-821). The combination of Cisco IOS and Catalyst simulated command line interface (CLI) establishes a foundation of knowledge that is integral to CCNA success, both in taking the CCNA exams and in one’s daily job as a CCNA professional.

    The title includes a drag-and-drop Network Designer that supports up to 200 devices using 45 different device models, including 40 different router models and 2 Catalyst switch models. Users can have up to 200 active Telnet sessions configuring devices inside the simulator. This unique feature allows users to create their own lab topologies, freeing them for the first time from the configurations locked in place by the software vendor. Currently no other network simulation package offers this much versatility and support.


    RS Download

    RapidShare: 1-CLICK Web hosting - Easy Filehosting




    Boson NetSim for CCNP 7.0 | 26 MB

    The Boson NetSim simulates both switching bridge tables and routing protocol tables to allow you to go OUTSIDE the labs. The Boson NetSim makes it possible to design and configure a network with 40 different router models and three different Catalyst models to choose from. BSCI, BCRAN, BCMSN and CIT labs are available in the current version.

    Features included in the Boson NetSim for CCNP
    - IPv6 addressing
    - OSPFv3 using IPv6 addresses
    - Multicasting configuration
    - New command parser
    - Improved command speed
    - Lab compiler application to create your own lab packages
    - New structure for the Lab Navigator
    - New implementation of OSPF, now with Multi-Area
    - Summarization for RIPv2 and EIGRP
    - New implementation of the routing table
    - Update utility included to download latest files available
    - Smaller installer

    Appz homepage:
    Click Here

    Download:

    Part.01
    Part.02



    Boson Collection

    * Boson Cisco Router CCIE Lab Practice Tests v5.67
    * Boson Check Point Firewall Practice Tests v5.68
    * Boson BICSI RCDD Practice Tests v5.68
    * Boson Cisco Router CCIE Lab Practice Tests v5.68
    * Boson Cisco Router Channel Partner Practice Tests v5.65
    * Boson Cisco Router Practice Tests v5.68
    * Boson Cisco Router Specialization Practice Tests v5.67
    * Boson Cisco Router Specialization Practice Tests v5.68
    * Boson Citrix Thin Client Practice Tests v5.68
    * Boson CIW Practice Tests v5.68
    * Boson Compaq Hardware Practice Tests v5.68
    * Boson CompTIA Standardized Practice Tests v5.68
    * Boson EC Council CEH Practice Tests v5.68
    * Boson Foundry Practice Tests v5.68
    * Boson HP Practice Tests v5.68
    * Boson IBM Practice Tests v5.68
    * Boson ISACA CISA Practice Tests v5.68
    * Boson ISC2 CISSP SSCP Practice Tests v5.68
    * Boson Juniper Practice Tests v5.68
    * Boson Lotus Professional Practice Tests v5.68
    * Boson Medical Practice Tests v5.68
    * Boson Microsoft Practice Tests v5.68
    * Boson NASD Business Practice Tests v5.68
    * Boson Oracle DBA Practice Tests v5.68
    * Boson Planet3 Wireless CWNP Practice Tests v5.68
    * Boson Project Management Institute PMP Practice Tests v5.68
    * Boson SAT Practice Tests v5.68
    * Boson Solomon Practice Tests v5.68
    * Boson Sun UNIX LPI Red Hat Linux Practice Tests v5.68
    * Boson Sybase Practice Tests v5.68
    * Boson TeacherTests Praxis Practice Tests v5.68
    Rapidshare.com
    Code:
    http://rapidshare.com/files/32212634....v5.68-RBS.rar
    http://rapidshare.com/files/32212555....v5.67-RBS.rar
    http://rapidshare.com/files/32212561....v5.68-RBS.rar
    http://rapidshare.com/files/32212557....v5.68-RBS.rar
    http://rapidshare.com/files/32212566....v5.68-RBS.rar
    http://rapidshare.com/files/32212562....v5.68-RBS.rar
    http://rapidshare.com/files/32212569....v5.68-RBS.rar
    http://rapidshare.com/files/32212564....v5.68-RBS.rar
    http://rapidshare.com/files/32212563....v5.68-RBS.rar
    http://rapidshare.com/files/32212570....v5.68-RBS.rar
    http://rapidshare.com/files/32212577....v5.68-RBS.rar
    http://rapidshare.com/files/32212583....v5.68-RBS.rar
    http://rapidshare.com/files/32212578....v5.68-RBS.rar
    http://rapidshare.com/files/32212581....v5.68-RBS.rar
    http://rapidshare.com/files/32212580....v5.68-RBS.rar
    http://rapidshare.com/files/32212579....v5.68-RBS.rar
    http://rapidshare.com/files/32212584....v5.68-RBS.rar
    http://rapidshare.com/files/32212588....v5.68-RBS.rar
    http://rapidshare.com/files/32212586....v5.68-RBS.rar
    http://rapidshare.com/files/32212593....v5.68-RBS.rar





    ویرایش توسط patris1 : 2009-09-25 در ساعت 02:37 PM
    mcmilad سپاسگزاری کرده است.

  5. #5
    نام حقيقي: Mehran,R

    عضو غیر فعال
    تاریخ عضویت
    Oct 2008
    محل سکونت
    Nowhere
    نوشته
    15
    سپاسگزاری شده
    0
    سپاسگزاری کرده
    6
    من میگم مشکل دارم، شما لینک دانلود میفرستید؟



  6. #6
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    شما اصلأ مطلب را خواندید که چه Command میشه استفاده کرد و چه جوری باید تایپ کرد؟؟

    چیزی که شما می خواهید اجرا کنید بالا تو لیست نوشته شده؟؟



  7. #7
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    این لینکها را برای این اینجا گذاشتم که بیخود یک صفحه جدید باز نکنم ، چون لینکها در مورد همین برنامه است



  8. #8
    نام حقيقي: Mehran,R

    عضو غیر فعال
    تاریخ عضویت
    Oct 2008
    محل سکونت
    Nowhere
    نوشته
    15
    سپاسگزاری شده
    0
    سپاسگزاری کرده
    6
    من میگم هر دستور میزنم میگه: %Incomplete command.
    چه کنم؟



  9. #9
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    تو هر Lab فقط دستور خاصی اجرا می شه و باید دقیق مثل بالا باشه



  10. #10
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    شما از این برنامه استفاده کن . مجانی است و خیلی بهتر از Boson Netsim هست





    Labs examples:








    -----------------------------------------------------------------------------------------------------------------------------

    این هم برایتان پیدا کردم. 600 Command را ساپورت می کند


    RouterSim BSCI Network Visualizer 6.0 | 47,2 MB

    RouterSim's BSCIâ„¢ Network Visualizer 6.0 is a CCNA and BSCI router and network simulator and is RouterSim's most robust product. You can design, build and configure your own network.

    With a program that offers 600 supported commands and over 230 labs, you are empowered to build, test and preview a large variety of networks! BSCI™ Network Visualizer® 6.0 is ideal for:
    Anyone studying for the Cisco® CCNA™ 640-802 exam and the BSCI™ 642-901 exam

    Deployment over a LAN network

    Distance education and deployment on a Citrix server or Microsoft Terminal Services

    Corporate trainers and employees

    Students at colleges, universities, and technical institutes

    Program Features ...

    Contains all labs and supported commands from our CCNA Network Visualizer 6.0 package

    Added new BSCI labs

    Added the 2811 router with four serial interfaces

    Added the 2960 switch and the 3560 switch

    This program has 28 practice scenarios based on Cisco® 640-802 test objectives and Cisco® 642-901 test objectives that can be graded with our Net Assessment software engine

    Offers labs on the SDM

    Offers labs on the SSH

    Offers labs on IPv6 and OSPFv3

    Revamped CCNA and BSCI labs that include more educational material

    You have the option of using RouterSim® or Cisco® devices in creating/viewing networks

    There are 30, self-contained, Individual labs that can be graded with our Net Assessment software engine

    Custom Labs ... Create and share your labs with others via the Network Visualizer menu. This is ideal for instructors

    Net Assessment ... for instructors and all other users. Test and evaluate your problem solving and troubleshooting skills

    Net Packet Monitor ... You can view a packet real time as it travels through your network


    Code:

    RapidShare: 1-CLICK Web hosting - Easy Filehosting





    ویرایش توسط patris1 : 2009-09-25 در ساعت 07:50 PM
    sca_ir، aliafzalan و NarbeH سپاسگزاری کرده‌اند.

  11. #11
    نام حقيقي: ناج

    عضو عادی
    تاریخ عضویت
    Aug 2009
    محل سکونت
    13
    نوشته
    144
    سپاسگزاری شده
    67
    سپاسگزاری کرده
    55
    ممنون patris



  12. #12
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    خواهش می کنم
    همانقدر که مورد استفادتون قرار گرفت خوشحالم کرد



  13. #13
    نام حقيقي: WWW

    عضو عادی شناسه تصویری D E V I L
    تاریخ عضویت
    Oct 2009
    محل سکونت
    XxX
    نوشته
    65
    سپاسگزاری شده
    8
    سپاسگزاری کرده
    43
    نقل قول نوشته اصلی توسط sca_ir نمایش پست ها
    من هر دستوری می نویسم تو این نرم افزار این پیغام رو میده:
    %Incomplete command.


    کد:
    
    Press Enter to Start
    
    Router>
    Router>
    Router>enable
    %Incomplete command. 
    
    Router>

    مشکل چیه؟
    سلام
    من هم مشکل این دوستمون رو دارم



  14. #14
    نام حقيقي: كاظم

    خواننده
    تاریخ عضویت
    Jul 2009
    محل سکونت
    Tehran
    نوشته
    259
    سپاسگزاری شده
    210
    سپاسگزاری کرده
    30

    L3 Simulator

    جناب پاتريس

    با تشكر از پست هاي خوب شما. تا حالا Simulator اي ديديد كه بتونه Layer 3 Switch رو شبيه سازي كنه ؟
    دنبال Lab اي مي گردم كه بشه از دستورات BCMSN توش استفاده كرد.
    خودم چيزي كه پيدا كردم يه ماژول سوئچ روي( 3600) Dynamips بود ولي همانطور كه مي دونيد يه همچين تركيبي به Router بيشتر شبيه تا L3 Switch



  15. #15
    نام حقيقي: 1234

    مدیر بازنشسته
    تاریخ عضویت
    Jul 2009
    محل سکونت
    5678
    نوشته
    5,634
    سپاسگزاری شده
    2513
    سپاسگزاری کرده
    272
    شنیدم كه این کار را این ورژن Boson NetSim میکند
    Boson NetSim for CCNP 7.0 | 26 MB

    The Boson NetSim simulates both switching bridge tables and routing protocol tables to allow you to go OUTSIDE the labs. The Boson NetSim makes it possible to design and configure a network with 40 different router models and three different Catalyst models to choose from. BSCI, BCRAN, BCMSN and CIT labs are available in the current version.

    Features included in the Boson NetSim for CCNP
    - IPv6 addressing
    - OSPFv3 using IPv6 addresses
    - Multicasting configuration
    - New command parser
    - Improved command speed
    - Lab compiler application to create your own lab packages
    - New structure for the Lab Navigator
    - New implementation of OSPF, now with Multi-Area
    - Summarization for RIPv2 and EIGRP
    - New implementation of the routing table
    - Update utility included to download latest files available
    - Smaller installer
    کد:
    http://rapidshare.com/files/65864973/Boson.Network.Simulator.7.for.CCNP.part1.rar
    http://rapidshare.com/files/65864974/Boson.Network.Simulator.7.for.CCNP.part2.rar



    kazem_m سپاسگزاری کرده است.

صفحه 1 از 3 1 2 3 آخرینآخرین

کلمات کلیدی در جستجوها:

boson netsim incomplete command

http://forum.persiannetworks.com/f63/t27400-3.html

دانلود نرم افزار boson

download نرم افزار boson netsim

boson netsim دانلود

http://forum.persiannetworks.com/f63/t27400.html

cannot enable router in netsim incomplete command

اجرا نشدن دستورات در boson netsim

کد اکتیو Boson NetSim 8.0

ccna network visualizer 6.0 crack

کرک bosan simulater version 7

چگونگی فعال سازی Boson NetSim 8.0

آموزش Boson NetSim

router>enable incomplete command.

ccna exam simulator free download

netsim 8

اجرا نشدن دستور enable در netsim

مشکل در نرم افزار Boson NetSim

boson net sim lerning edition کرک نرم افزار

دانلود نرم افزار boson netsim

آموزش نرم افزار boson netsim

Boson Collection

دانلود کرک boson netsim 8

incomplete command boson

netsim incomplete command

برچسب برای این موضوع

مجوز های ارسال و ویرایش

  • شما نمی توانید موضوع جدید ارسال کنید
  • شما نمی توانید به پست ها پاسخ دهید
  • شما نمی توانید فایل پیوست ضمیمه کنید
  • شما نمی توانید پست های خود را ویرایش کنید
  •