تنظیم روتر 2821

سلام
من یک روتر 2821 دارم که 11 نقطه بو سیله تجهیزات الکاتل مخابرات با شبکه مرکز در ارتباطن و مشکلی هم ندارن الان اومدم د نقطه با تجهیزات تلبس به اون اضافه کردم ولی وصل نمیشن در ضمن کانفیگ روترم به شکل زیر ممنون می شم اگه کسی کمکم کنه

Building configuration...
Current configuration : 6027 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
**** hostname
!
boot-start-marker
boot-end-marker
!
card type e1 1
logging buffered 51200 warnings
enable secret 5 $1$93yG$9vhtWgq6/4erMOHJ8eJTg1
enable password 110
!
no aaa new-model
!
resource policy
!
!
!
ip cef
!
!
ip domain name yourdomain.com
multilink virtual-template 1
!
voice-card 0
no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
!
***** username admin privilege 15 password 0
username nked privilege 15 secret 5 $1$X7/e$cnfr7Ny5GrDg9GkALKBK20
!
!
controller DSL 0/1/0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex B
ignore-error-duration 30
line-rate 2304
!
controller E1 1/0
channel-group 0 timeslots 1
channel-group 1 timeslots 2
!
!
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 192.168.10.7 255.255.255.0
duplex auto
speed auto
no mop enabled
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface ATM0/1/0
no ip address
no atm ilmi-keepalive
pvc *** 1/1
!
!
interface ATM0/1/0.1 multipoint
ip address 10.20.37.1 255.255.255.252
no snmp trap link-status
pvc **** 28/50
encapsulation aal5snap
!
!
interface ATM0/1/0.2 multipoint
ip address 10.20.37.5 255.255.255.252
no snmp trap link-status
pvc *** 28/51
cbr 256
encapsulation aal5snap
!
!
interface ATM0/1/0.3 multipoint
ip address 10.20.37.9 255.255.255.252
no snmp trap link-status
pvc **** 28/52
cbr 256
encapsulation aal5snap
!
!
interface ATM0/1/0.4 multipoint
ip address 10.20.37.13 255.255.255.252
no snmp trap link-status
pvc **** 28/53
encapsulation aal5snap
!
!
interface ATM0/1/0.5 multipoint
ip address 10.20.37.17 255.255.255.252
no snmp trap link-status
pvc **** 28/54
encapsulation aal5snap
!
!
interface ATM0/1/0.6 multipoint
ip address 10.20.37.21 255.255.255.252
no snmp trap link-status
pvc **** 28/55
encapsulation aal5snap
!
!
interface ATM0/1/0.7 multipoint
ip address 10.20.37.25 255.255.255.252
no snmp trap link-status
pvc *** 28/56
cbr 64
encapsulation aal5snap
!
!
interface ATM0/1/0.8 multipoint
ip address 10.20.37.29 255.255.255.252
no snmp trap link-status
pvc *** 28/57
cbr 64
encapsulation aal5snap
!
!
interface ATM0/1/0.9 multipoint
ip address 10.20.37.33 255.255.255.252
no snmp trap link-status
pvc **** 28/58
cbr 64
encapsulation aal5snap
!
!
interface ATM0/1/0.10 multipoint
ip address 10.20.37.37 255.255.255.252
no snmp trap link-status
pvc **** 28/59
cbr 64
encapsulation aal5snap
!
!
interface ATM0/1/0.11 multipoint
ip address 10.20.37.41 255.255.255.252
no snmp trap link-status
pvc ***** 28/60
cbr 64
encapsulation aal5snap
!
!
interface Serial1/0:0
ip unnumbered GigabitEthernet0/0
encapsulation ppp
!
interface Serial1/0:1
ip unnumbered GigabitEthernet0/0
encapsulation ppp
!
interface Virtual-Template1
description connected to Kerman
ip unnumbered GigabitEthernet0/0
ip tcp header-compression iphc-format
fair-queue 64 256 1
ppp multilink
ppp multilink fragment delay 30
ppp multilink interleave
ip rtp header-compression iphc-format
ip rtp reserve 16384 100 24
!
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 172.17.1.0 255.255.255.0 192.168.0.19 permanent
ip route 192.168.200.0 255.255.255.0 10.20.37.2 permanent
ip route 192.168.201.0 255.255.255.0 10.20.37.10 permanent
ip route 192.168.202.0 255.255.255.0 10.20.37.6 permanent
ip route 192.168.203.0 255.255.255.0 10.20.37.14 permanent
ip route 192.168.205.0 255.255.255.0 10.20.37.22 permanent
ip route 192.168.206.0 255.255.255.0 10.20.37.26 permanent
ip route 192.168.207.0 255.255.255.0 10.20.37.30 permanent
ip route 192.168.208.0 255.255.255.0 10.20.37.34 permanent
ip route 192.168.209.0 255.255.255.0 10.20.37.38 permanent
ip route 192.168.210.0 255.255.255.0 10.20.37.42 permanent
[COLOR=red]ip route 192.168.211.0 255.255.255.0 Serial1/0:0 permanent
[/COLOR]ip route 196.168.10.0 255.255.255.0 10.20.37.6 permanent
ip route 198.168.10.0 255.255.255.0 10.20.37.18 permanent
!
!
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
snmp-server community NKEDRead RO
!
!
!
control-plane
!
!
!
voice-port 0/0/0
description connected to Phone_2 (349-959-2222)
!
voice-port 0/0/1
description connected to Phone_3 (349-959-1111)
!
!
!
!
!
dial-peer voice 1 pots
destination-pattern 3412522222
port 0/0/0
!
dial-peer voice 2 pots
destination-pattern 3412521111
port 0/0/1
!
dial-peer voice 3 voip
destination-pattern 3499592222
session target ipv4:192.168.200.7
ip qos dscp cs5 media
!
dial-peer voice 4 voip
destination-pattern 3499591111
session target ipv4:192.168.200.7
ip qos dscp cs5 media
!
num-exp 1.... 341252....
num-exp 9.... 349959....
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to [url=http://www.cisco.com/go/sdm]Shortcut Redirect - Cisco Systems[/url]
-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line vty 0 4
privilege level 0
**** password
login local
transport input telnet
line vty 5 15
privilege level 0
***** password
login local
transport input telnet
!
scheduler allocate 20000 1000
!
end