دوستان سلام:
من می خواهم یه Log Server برای AS5300 خودم بزارم. چی پیشنهاد می کنید؟
موضوعات مشابه:
|
دوستان سلام:
من می خواهم یه Log Server برای AS5300 خودم بزارم. چی پیشنهاد می کنید؟
موضوعات مشابه:
Thanks mr khayat
I use 3CSyslog/3CDaemon server. Now, how i view the log with this software
Thank You
Masood.Y
The software you are using is old, any how you should set it to save the logs under some directory and then look into that folder for the logs, if you are using syslog from kiwi you well have an active icon that shows you real time logs.
Good Luck!
?ok, how config the kiwi log server
do you help me?
Sure,
Install the kiwi logging server,
open File > Setup
Right Click Archiving, Add New archive schedule. leave everything as is (or if you know you need other settings) only under Dated Files / Folders Options > Dated File Names.
Thats it, you are all set, now each day you well find a log file under the folder .\Program Files\Kiwi Syslog\Logs
Good Luck!
Kiwi بسیار ساده و در عین حال قوی است. تنظیماتش ساده است. نسخه ای دارد که به صورت Service اجرا می شود و Log را ذخیره می کند.
جناب خیاط از لطفتون ممنونم
اگر ممکنه در مورد قسمت های مختلفت مسیر open File > Setup > Input نرم افزار بیشتر توضیح بدید.
سپاسگذارم
When you install it, Run the Kiwi syslog, Open its window and from the toolbar open File > Setup.
Good Luck!
1- Don't need kiwi log server to router ip address?
2- My router config for logging: logging [kiwi server ip]. is true?
Yes you are right
though you can set syslog to accept logs only from the IP you put in it,
In your router also you should always put the IP of your syslog yes, you can add some bufferes
logging buffered 99999
logging facility syslog
logging 192.168.0.1
Good Luck!
Thank you mr khayat.
I hope to compensation your help.
Server is started and kiwi log server is one of best log server program.
But when i use telnet and change some config, kiwi not log my change and login.
Now, kiwi just log interface, async, ethernet and serial condition
ببین دوست من، کار خیلی ساده است.نوشته اصلی توسط PoorSam
نرم افزار رو روی یه سیستم نصب می کنی و بعد از باز کردن پورت های مورد نیاز kiwi، آی پی سرور رو به روتر میدی و بعد هم حالشو می بری.
Log Server همانطور که از نامش پیداست میاد و رویدادهایی که روی هاست مورد نظر اتفاق میفته رو برات ذخیره می کنه و می تونی بفهمی که چه اتفاقاتی در یک روز افتاده.
به طور مثال برای روتر میاد وضعیت ورود و خروج یوزرها، وضعیت ورود به روتر و تغییر در کانفیگ، وضعیت سریال و هر چی که بخوای رو لاگ می کنه.
در مورد نحوه راه اندازی LOG SERVER که به سادگی هم انجام میشه جناب خیاط (NetMaster) توضیحات کاملی ارائه کردند.