-
Router>
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
سلام وقتی می خوام از heper terminal وارد روترم بشم زمانی مشخصات را به heper terminal می دم
وارد روتر که میشم بعد از ان خارج بشم یانه این ایرور پشته سرهم بالا میاد
میشه بگید این ارور نشانه چیست ؟
--------------------
اقای محمد رسول راستی M.r.r من به شما ایمل دادم و فرستادم ولی متاسفانه هیچ جواب برام میل نکردی اصلا ایمل من رسیده دسته شما [EMAIL="araratnet_net@yahoo.com"]araratnet_net@yahoo.com[/EMAIL]
-----------------------------
لطف اگه میشه مارا راهنمایی کنید
-
خیر متاسفانه هیچ ایمیلی از طرف شما دریافت نداشتم متاسفانه، لطف کنید رونوشت ایمیلتون رو همینجا PM کنید.
-
Yahoo!m_rasoul_rasti سلام اقا محمد رسولی راستی من به این ایمل ایمل فرستادم همونی که بالا هست البته این طوری ایمل را در کمپوس نوشتم [EMAIL="m_rasoul_rasti@yahoo.com"]m_rasoul_rasti@yahoo.com[/EMAIL] با ایمیل [EMAIL="araratnet_net@yahoo.com"]araratnet_net@yahoo.com[/EMAIL]
این یک
بعدا من اگر بخوام برنامه MRTG Index Page را در این جا بزارم دوستان ببینند باید چکار کنم ؟
ایا ادرس ایپیم را بنویسم یا نه روشی دیگه هست
راستی کسی نبود بگه اون ارور نشانه چی بوده
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
2w2d: %PQUICC-5-LATECOLL: Unit 0, late collision error
-
نه چیزی دریافت نشده بود متاسفانه...
در مورد MRTG ، آدرس صفحه ای که خودتون میتونید با استفاده از اون آدرس، گزارش مربوط به MRTG رو ببینید رو بزارید .
اما در مورد خطایی که بهتون داده میشه،
با جستجوی گوگل به این نتیجه رسیدم :
[LEFT][B]Late Collisions[/B]
To allow collision detection to work properly, the period in which collisions are detected is restricted (512 bit-times). For Ethernet, this is 51.2us (microseconds), and for Fast Ethernet, 5.12us. For Ethernet stations, collisions can be detected up to 51.2 microseconds after transmission begins, or in other words up to the 512th bit of the frame.
When a collision is detected by a station after it has sent the 512th bit of its frame, it is counted as a late collision.
Late collisions are reported by these error messages:
%AMDP2_FE-5-LATECOLL: AMDP2/FE 0/0/[dec], Late collision
%DEC21140-5-LATECOLL: [chars] transmit error
%ILACC-5-LATECOLL: Unit [DEC], late collision error
%LANCE-5-LATECOLL: Unit [DEC], late collision error
%PQUICC-5-LATECOLL: Unit [DEC], late collision error
%PQUICC_ETHER-5-LATECOLL: Unit [DEC], late collision error
%PQUICC_FE-5-LATECOLL: PQUICC/FE([DEC]/[DEC]), Late collision
%QUICC_ETHER-5-LATECOLL: Unit [DEC], late collision error
The exact error message depends on the platform. You can check the number of excessive collisions in the output of a show interface ethernet [interface number] command.
router#show interface ethernet 0
Ethernet0 is up, line protocol is up
Hardware is Lance, address is 0010.7b36.1be8 (bia 0010.7b36.1be8)
Internet address is 10.200.40.74/22
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:06, output hang never
Last clearing of "show interface" counters never
Input queue: 1/75/1/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: random early detection(RED)
Output queue :0/40 (size/max)
5 minute input rate 1000 bits/sec, 2 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2058015 packets input, 233768993 bytes, 1 no buffer
Received 1880947 broadcasts, 0 runts, 0 giants, 1 throttles
3 input errors, 0 CRC, 0 frame, 0 overrun, 3 ignored
0 input packets with dribble condition detected
298036 packets output, 32280269 bytes, 0 underruns
0 output errors, 10 collisions, 0 interface resets
0 babbles, 0 late collision, 143 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Note: The station that reports the late collision merely indicates the problem; it is generally not the cause of the problem. Possible causes are usually incorrect cabling or a non-compliant number of hubs in the network. Bad network interface cards (NICs) can also cause late collisions.[/LEFT]
-
[IMG]http://i1.tinypic.com/4vnqolg.jpg[/IMG]سلام دوستان همگی خوبید
-
اقای محد رسول راستی اینم از برنامه mrtg که خواستی
راستی نوشته لی شما نوشتی به خوبی نگرفتم و نتونستم به خوبی باهاش کنار بیام
اگه میشه واضحتر برام بگی
راستی یه چیزه دیگه من می خوام رویه گزینه نقل قول کلک کن مربعش بسته هست و بهم اجازه نمی ده باید چکار کنم