این هم مراحل boot
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950T-24 starting...
Base ethernet MAC Address: 00:12:43:a3:aa:40
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 4 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 3085824
flashfs[0]: Bytes available: 4655616
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs
installed, fsid: 3
Parameter Block Filesystem (pb
installed, fsid: 4
Loading "flash:/C2950-i6q4l2-mz.121-
22.ea1.bin"...##############################
################################################## #######################
####### ################################################## ###########
####
File "flash:/C2950-i6q4l2-mz.121-22.ea1.bin" uncompressed and installed, entry
oint: 0x80010000
executing...
Image text-base: 0x80010000, data-base: 0x8055C000
Initializing flashfs...
flashfs[1]: 4 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 3085824
flashfs[1]: Bytes available
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
cisco WS-C2950T-24 (RC32300) processor (revision Q0) with 20873K bytes of
memory
Processor board ID FOC0816W0MJ
Last reset from system-reset
Running Enhanced Image
23 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:12:43:A3:AA:40
Motherboard assembly number: 73-6114-10
Power supply part number: 34-0965-01
Motherboard serial number: FOC08412CTA
Power supply serial number: DAB0838GVD2
Model revision number: Q0
Motherboard revision number: A0
Model number: WS-C2950T-24
System serial number: FOC0816W0MJ
Press RETURN to get started!
00:00:13: POST: Loop back Test Failed on FastEthernet0/24. State
isabled
00:00:14: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:16: %SYS-5-CONFIG_I: Configured from memory by console
00:00:16: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA1, RELEASE SOFTWA
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 12-Jul-04 08:18 by madison
00:00:16: %SNMP-5-COLDSTART: SNMP agent on host sw_f3_1 is undergoing a cold
sta
rt
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to
administr
atively down
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/5, changed state to
administr
atively down
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/7, changed state to
administr
atively down
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/8, changed state to
administr
atively down
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/9, changed state to
administr
atively down
00:00:17: %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to
administ
ratively down
00:00:18: %LINK-5-CHANGED: Interface FastEther
ratively down
00:00:18: %LINK-5-CHANGED: Interface FastEthernet0/14, changed state to
administ
ratively down
00:00:18: %LINK-5-CHANGED: Interface FastEthernet0/16, changed state to
administ
ratively down
00:00:18: %LINK-5-CHANGED: Interface FastEthernet0/17, changed state to
administ
ratively down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3,
chang
ed state to down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5,
chang
ed state to down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7,
chang
ed state to down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8,
chang
ed state to down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9,
chang
ed state to down
00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11,
chan
ged state to down
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13,
chan
ged state to down
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/14,
chan
ged state to down
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16,
chan
ged state to down
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17,
chan
ged state to down